On 21 June 2010 21:42, Srija <[email protected]> wrote: > Hi > > This is regarding the configuration of bonding between the two ports, > > I have already configured with eth0 and eth1 bonded to bond0 and it worked > fine. > > The configuration is simple and associated to one ip (configured in bond0 > configuration file ) which is communicating to eth0 and eth1. eth0 and eth1 > is set as slave of bond0. > > Now I want to configure the same eth0 and eth1 to bond0 when, eth0 is set > with trunking and associated to three subnets. > > If I understand you correctly, you want VLAN trunking with bond0. Possibly more than one different VLAN (three?).
In that case, you create a bond0.NN where NN is the VLAN tag. You can have more than one of these. The VLAN tag is taken care of by the bond device rather than the bond's slaves. There's more information in /usr/share/doc/kernel-doc-*/Documentation/networking/bonding.txt (you'll need to install kernel-doc for that) and also somewhere in /usr/share/doc/initscripts-*/* -- that documentation is a bit spotty though and I tend to resort to reading the actual shell scripts in /etc/sysconfig/network-scripts. jch
_______________________________________________ rhelv5-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list
