@trevor: I tried rhel6 beta boot CD, using the anaconda on that CD and the one with the rhel.. still the same problem.
@Colin: How can i increase dhcp timeout? passing nicdelay=90 will to the kernel at isolinux.cfg will work? Thanks for the quick reply! On Wed, Jul 21, 2010 at 1:49 PM, Colin Coe <[email protected]> wrote: > Wild guess, is the switch the dc6000 plugs into have spanning tree > enabled? This can cause a 50 second delay before the port is usable > which may be long enough for DHCP time out. > > CC > > On Wed, Jul 21, 2010 at 7:37 PM, Diego . <[email protected]> wrote: > > Hello! > > > > I have a install boot CD, which i use with kickstart to install rhel5 on > > workstations, with kernel version 2.6.18-92.el5 > > > > My problem comes with hp dc6000, the install cd can't get the eth up, so > > can't download the ks file nor reach other install images. > > > > The ethernet model is: > > Intel Corporation 82567LM-3 Gigabit Network > > > > The driver it needs is the e1000e.ko, which is included on the > > /etc/modules.cgz on the install boot CD. Also i added a new alias on > > modules.alias for the card: > > alias pci:v00008086d000010DEsv*sd*bc*sc*i* e1000e > > > > But when acandona runs it shows me the ethernet screen configuration, > asking > > me or manual or dhcp config. DHCP never works > > If I change the terminal during this, i can see this message: > > eth is not a wireless card > > dhcp fails > > > > Any tip or help? > > > > Thanks!! > > > > _______________________________________________ > > rhelv5-list mailing list > > [email protected] > > https://www.redhat.com/mailman/listinfo/rhelv5-list > > > > > > > > -- > RHCE#805007969328369 > > _______________________________________________ > rhelv5-list mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/rhelv5-list >
_______________________________________________ rhelv5-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list
