Jan -
I am hacking on it a bit to more closely match your use case. As soon as I have
it done I will send it and the test generation script I'm using to populate
test data.
--Kevin
On Nov 9, 2010, at 10:35 AM, Jan Buchholdt wrote:
> Kevin -
>
> The test client is part of a bigger system and would be a bit too much top
> send to you. The method that is calling Riak looks like this:
>
> import com.basho.riak.client.*;
> .
> .
> public List<Document> lookupDocuments(String personId, String url) {
> RiakClient riak = new RiakClient(url);
>
> WalkResponse walkResponse = riak.walk("person", personId,
> "document,_,_");
> if (walkResponse.isSuccess()) {
> List<Document> out = new ArrayList<Document>();
> List<? extends List<RiakObject>> steps = walkResponse.getSteps();
> if (steps.size() != 1) {
> throw new RuntimeException("Expected to walk one link. Walked
> " + steps.size());
> }
> List<RiakObject> step = steps.get(0);
> for (RiakObject o : step) {
> try {
> String chars = o.getValue();
> Builder builder = Protos.Document.newBuilder();
> JsonFormat2.merge(chars, builder);
> out.add(((Document) builder.build()).getDocument());
> } catch (ParseException e) {
> throw new DocumentServiceException("Error parsing
> document", e);
> }
> }
> return out;
> } else {
> throw new RuntimeException("Walk error: " +
> walkResponse.getHttpHeaders());
> }
> }
>
> It could be interesting to repeat your test on our cluster, to see if we get
> the same numbers as you do. Is it possible for you to send the code behind
> your test?
>
> --
> Jan Buchholdt
> Software Pilot
> Trifork A/S
> Cell +45 50761121
>
>
>
> On 2010-11-09 15:47, Karsten Thygesen wrote:
>> On Nov 9, 2010, at 14:58 , Kevin Smith wrote:
>>
>>> On Nov 9, 2010, at 5:01 AM, Karsten Thygesen wrote:
>>>
>>>> Hi
>>>>
>>>> OK, we will use a larger ringsize next time and will consider a data
>>>> reload.
>>>>
>>>> Regarding the metrics: the servers are dedicated to Riak use and it not
>>>> used for anything else. They are new HP servers with 8 cores each and
>>>> 4x146GB 10K RPM SAS disks in a contatenated mirror setup. We use Solaris
>>>> with ZFS as filesystem and I have turned off atime update in the data
>>>> partition.
>>>>
>>>> The pool is built as such:
>>>>
>>>> pool: pool01
>>>> state: ONLINE
>>>> scrub: scrub completed after 0h0m with 0 errors on Tue Oct 26 21:25:05 2010
>>>> config:
>>>>
>>>> NAME STATE READ WRITE CKSUM
>>>> pool01 ONLINE 0 0 0
>>>> mirror-0 ONLINE 0 0 0
>>>> c0t0d0s7 ONLINE 0 0 0
>>>> c0t1d0s7 ONLINE 0 0 0
>>>> mirror-1 ONLINE 0 0 0
>>>> c0t2d0 ONLINE 0 0 0
>>>> c0t3d0 ONLINE 0 0 0
>>>>
>>>> errors: No known data errors
>>>>
>>>> so it is as fast as possible.
>>>>
>>>> However - we use the ZFS default blocksize, which is 128Kb - is that
>>>> optimal with bitcask as backend? It is rather large, but what is optimal
>>>> with bitcask?
>>> I don't have much experience tuning Solaris or ZFS for Riak. This is a
>>> question best asked of Ryan and I will make sure he sees this.
>> Thanks!
>>
>>>> The cluster is 4 servers with gigabit connection located in the same
>>>> datacenter on the same switch. The loadbalancer is a Zeus ZTM, which does
>>>> quote a few http optimizations including extended reuse of http
>>>> connections and we usually see far better response times using the
>>>> loadbalancer than using a node directly.
>>> Hmmm. Can you share what the performance times are like for direct cluster
>>> access?
>> In this case, there is no measurable difference whenever we ask a cluster
>> node directly or we go through the loadbalancer. The largest difference is
>> when we hit it with a lot of small requests, but that is not the case here.
>>
>>>> When we run the test, each riak node is only about 100% cpu loaded (which
>>>> on solaris means, that it only uses one of the 8 cores). We have seen
>>>> spikes in the 160% area, but everything below 800% is not cpu bound. So
>>>> all-in-all, the cpuload is between 5 and 10%.
>>> Can you send me the code you're using for the performance test? I'd like to
>>> run the exact code on my test hardware and see if that reveals anything.
>> Jan, can you please provide the test client?
>>
>>> Also, low CPU usage might indicate you are IO bound. Do you know if Riak
>>> processes are spending much time waiting for IO to complete?
>>>
>> It does not seem so. The servers are not IO bound, there is plenty of
>> network capacity and the disks is only around 10% loaded.
>>
>> My largest suspicion is on the datamodel - when having a 4-node cluster and
>> doing a linkwalk, which need to combine around 5-600 documents, it will take
>> quite some time, but we still feel, that the numbers is very high.
>>
>> Perhaps we should consider a datamodel, where we collect, say, 100 documents
>> in a basket and the only have to linkwalk 4-5 baskets to return an answer?
>> Tempting, performancewise, but it makes it a lot harder to maintain the data
>> afterwards as we can not just use map-reduce and similar technologies to
>> handle data...
>>
>> Karsten
>>
>>> --Kevin
>>>
>>>
_______________________________________________
riak-users mailing list
[email protected]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
