Malte Appel already partially responded to you questions. I will try to provide more details.
Each probe has build-in measurements for 1st and 2nd hop. For your probe it is: * nice view https://atlas.ripe.net/probes/1001821/#tab-builtins * 1st hop https://atlas.ripe.net/api/v2/measurements/1/results/?probe_ids=1001821&start=1619136000&stop=1619222399&format=json * 2nd hop https://atlas.ripe.net/api/v2/measurements/2/results/?probe_ids=1001821&start=1619136000&stop=1619222399&format=json If you take your probe as an example you will notice that your first hop is your local router (Starlink dish?) and it has RTT <1ms. It's your 2nd hop which can indicate what RTT is generated by Starlink satellite connection (RTT Median Average ~30ms). I'm curious where exactly is located this 2nd hop :) Regards, Grzegorz From: Ray Bellis <r...@isc.org> Date: Friday 2021-04-23 at 10:44 To: "ripe-atlas@ripe.net" <ripe-atlas@ripe.net> Subject: Re: [atlas] Satellite based "last mile" and Atlas probes On 22/04/2021 20:52, Ponikierski, Grzegorz via ripe-atlas wrote: Checking first hop can be tricky because this first hop can be local router with RTT <1ms and second hop can indicate that we are on satellite connectivity. For that API for sure API must be used. Here is the full list of build in measurements: https://urldefense.com/v3/__https://beta-docs.atlas.ripe.net/built-in/reference.html*traceroute-5-000-6-999__;Iw!!GjvTz_vk!CGnJSJwFwnAeSTFJcu_wN5qF5pxMnHYnUY2rcHz_afOJoH0Tp49DDDQm0TvPlSQ$<https://urldefense.com/v3/__https:/beta-docs.atlas.ripe.net/built-in/reference.html*traceroute-5-000-6-999__;Iw!!GjvTz_vk!CGnJSJwFwnAeSTFJcu_wN5qF5pxMnHYnUY2rcHz_afOJoH0Tp49DDDQm0TvPlSQ$> <https://urldefense.com/v3/__https://beta-docs.atlas.ripe.net/built-in/reference.html*traceroute-5-000-6-999__;Iw!!GjvTz_vk!CGnJSJwFwnAeSTFJcu_wN5qF5pxMnHYnUY2rcHz_afOJoH0Tp49DDDQm0TvPlSQ$<https://urldefense.com/v3/__https:/beta-docs.atlas.ripe.net/built-in/reference.html*traceroute-5-000-6-999__;Iw!!GjvTz_vk!CGnJSJwFwnAeSTFJcu_wN5qF5pxMnHYnUY2rcHz_afOJoH0Tp49DDDQm0TvPlSQ$> > + build in ping tests for 1^st and 2^nd hop are respectively measurement #1 and #2. Can you please elaborate on this? I have a separate need (relating to an ICANN RSSAC WG) to be able to detect high latency last mile hops but I could not identify the specific "built-in ping tests for 1st and 2nd hop" that you described. Were you perhaps suggesting that it was actually just the first couple of rows of data from the built-in *traceroute* tests that hold this data? thanks, Ray
