I had a feeling it might be that but don't like to jump to conclusions w/o invesitgating. So the only one with a nice reset/reboot is the H120?
It raised a question though: how long does the reset take? It's supposed to have about 1ms to put it high again before it goes to standby. If the pin could be high again within a short enough time it might work. ----- Original Message ----- From: "Linus Nielsen Feltzing" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, November 03, 2006 5:24 AM Subject: Re: jethead71: firmware/target/coldfire system-coldfire.c,1.2,1.3 > [EMAIL PROTECTED] wrote: > > More tweak to ColdFire default exception handler. iRiver reboots on > > power press but x5 just shuts down. Haven't yet thought much about > > why or how to make it reboot on x5 if it's possible. > > The X5 shuts down because the KEEP_ACT signal goes inactive when the > port pins are tri-stated at reset. It's the same with H300. > > Linus >
