(!? Quizzical look)... Am I reading you correctly? You can hot swap
Nubus cards? Surely not...
Thanks, I forgot to try resetting the PRAM. Will let you know.
Jack
On Jun 2, 2004, at 4:05 PM, Aram Fingal wrote:
Have you tried resetting the PRAM? Hold down option-command-P-R at
startup and keep holding it down until you hear a third start up
chime. It is a common thing for Nubus based Macs to need a PRAM reset
in order to recognize a card, particularly so if you remove one card
and put in another without starting up in between.
On Saturday, May 29, 2004, at 03:43 PM, Jack Gallemore wrote:
I've got a Rocket (040, v 1.0 on the ROM) with 32MB RAM in a IIci
with 32MB RAM as well. Jumpers A and B are set to 100NS since I
don't know the true speed of the RAM. I've tried to load
RocketShare, but the software doesn't see the board at all. I've
tried a custom install and it still doesn't see the board. I know
the RAM is good since I pulled it from a working machine. There are
no other cards in the machine as well. What else do I need to look
at?
Jack
--
Rocketeer is sponsored by <http://lowendmac.com/> and...
Save on Mac software -- Shop Software Outlet.com
<http://lowendmac.com/ad/software.outlet.html>
Support Low End Mac <http://lowendmac.com/lists/support.html>
Rocketeer list info: <http://lowendmac.com/lists/rocketeer.html>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/rocketeer%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
