|
Look for vprdict.txt in your radius
directory.
Steve
----- Original Message -----
Sent: Monday, November 08, 2004 4:08
PM
Subject: [Rodopi] IS anyone doing?
Okay I just add an DTG-PPPoE-CBQ-TX = 4096, DTG-PPPoE-CBQ-RX =
4096
attribute and then created a Radius Attribute template, Now where is
the
dictionary file? I have not found this in radius!
-----Original
Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Behalf Of Erik Tijburg
Sent:
Monday, November 08, 2004 2:59 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi]
IS anyone doing?
You can do it that way. I prefer to do it
with Rodopi Radius templates.
You still need to define the
DTG-PPPoE-CBQ-TX & RX attributes in the
dictionary
file.
Erik
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Steve J. Drenner
Sent:
Monday, November 08, 2004 2:54 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi]
IS anyone doing?
SO I would add something like this to the profiles.txt
file in vopradius:
user Auth-Type
:= Local, User-Password ==
"password"
Framed-IP-Address =
x.x.x.x,
MS-Primary-DNS-Server =
x.x.x.x,
MS-Secondary-DNS-Server =
x.x.x.x,
DTG-PPPoE-CBQ-TX =
4096,
DTG-PPPoE-CBQ-RX = 4096
OR is there somewhere
else?
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Behalf Of Erik Tijburg
Sent:
Monday, November 08, 2004 2:36 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi]
IS anyone doing?
First you will need to define the VSA in your
Radius Dictionary file. So
that these attribute s are defined in
VOP.
Then you will need to define these attributes in Rodopi. You
can do this
under the Radius Attributes under the Admin
interface.
Then you will need to define some different templates for
each speed you
want to give out.
Then you will apply these different
templates to different services plans
based on the speed you want to
give out for that plan.
It is all in the
documentation.
Erik
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Steve J. Drenner
Sent:
Monday, November 08, 2004 2:27 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi]
IS anyone doing?
Can you give me an example of how to set that up? And
then how would that
pass onto radius, I am using virom Radius
4.0
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Behalf Of Erik Tijburg
Sent:
Monday, November 08, 2004 2:22 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi]
IS anyone doing?
You would do this with radius Attributes not plan
details.
Erik
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Steve J. Drenner
Sent:
Monday, November 08, 2004 2:08 PM
To: Rodopi Forum
Subject: [Rodopi] IS
anyone doing?
I have written to the forum lately asking some questions
about how to make a
certain billing plan and how to at a new fee option.
With no responses form
anyone.
So I am going to try yet an other
question, and how to get some feedback.
I am running rodopi 5.4
I
need to create a new attribute or Plan Detail item not sure which it
would
go under.
Here is what I need to do, I am setting up a WIFI
hotspot using a
www.demarctech.com
ReliawaveT RWV 802.11a/b/g Outdoor AP/Router/Hotspot
Controller
This
unit will do Radius Authentication and IP Accounting, I have this
working
and works great. What I need now is to get an attribute or
plan
detail created to set users bandwidth TX & RX it needs to be
something like:
DTG-PPPoE-CBQ-TX = xx
DTG-PPPoE-CBQ-RX =
xx
My hope is, is that someone out there is doing something like
this and would
share there
thoughts..
Thanks
------------------------------------
Midwaynet.net
/ Midway Electronics Inc.
Steve J. Drenner
Director of Internet
Service
[EMAIL PROTECTED]
1250 N
McKinley Ave
Rensselaer IN 47978
tel: 219-866-3716
fax:
219-866-0319
mobile: 219-866-9079
www.midwaynet.net
------------------------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ at
http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ at
http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ at
http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ at
http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ at
http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ at
http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with the word LEAVE as the message body.
Please also visit the
Rodopi FAQ at http://www.rodopi-faq.com
---------------------
|
