|
Okay,
I found the vprdict.txt
It
looks complex, what all do I need to add here is what the vender has suplied for
a dictionary.txt. ( I have never done any editing in attributes or vprdict.txt,
this is all new to me so the more help the better. ) Thanks
#
# Demarc Technology Group, LLC specific radius
attributes
# [EMAIL PROTECTED]
#
# Version
1.0 - March 26, 2003
# Version 1.1 - March 10, 2004 (added splash
attribute for RWV v1.13.4)
#
VENDOR DemarcTech 16313
BEGIN-VENDOR Demarctech
#
Rates to give PPPoE customers, can be used in Authentication replies. (in
bits/s)
ATTRIBUTE DTG-PPPoE-CBQ-RX 1 integer
ATTRIBUTE DTG-PPPoE-CBQ-TX 2 integer
#
Fallback support for each direction. (1 /
0)
ATTRIBUTE DTG-PPPoE-CBQ-RX-Fallback 3 integer
ATTRIBUTE DTG-PPPoE-CBQ-TX-Fallback 4 integer
# show
splash page (value 1), do not show splash page (value
0)
ATTRIBUTE splash 10 integer
END-VENDOR DemarcTech
Look for vprdict.txt in your radius
directory.
Steve
----- Original Message -----
Sent: Monday, November 08, 2004 4:08
PM
Subject: [Rodopi] IS anyone
doing?
Okay I just add an DTG-PPPoE-CBQ-TX = 4096, DTG-PPPoE-CBQ-RX
= 4096
attribute and then created a Radius Attribute template, Now where
is the
dictionary file? I have not found this in
radius!
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Behalf Of Erik Tijburg
Sent:
Monday, November 08, 2004 2:59 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi]
IS anyone doing?
You can do it that way. I prefer to do it
with Rodopi Radius templates.
You still need to define the
DTG-PPPoE-CBQ-TX & RX attributes in the
dictionary
file.
Erik
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Steve J.
Drenner
Sent: Monday, November 08, 2004 2:54 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi]
IS anyone doing?
SO I would add something like this to the
profiles.txt file in
vopradius:
user Auth-Type :=
Local, User-Password ==
"password"
Framed-IP-Address =
x.x.x.x,
MS-Primary-DNS-Server =
x.x.x.x,
MS-Secondary-DNS-Server =
x.x.x.x,
DTG-PPPoE-CBQ-TX =
4096,
DTG-PPPoE-CBQ-RX = 4096
OR is there somewhere
else?
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Behalf Of Erik Tijburg
Sent:
Monday, November 08, 2004 2:36 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi]
IS anyone doing?
First you will need to define the VSA in your
Radius Dictionary file. So
that these attribute s are defined in
VOP.
Then you will need to define these attributes in Rodopi.
You can do this
under the Radius Attributes under the Admin
interface.
Then you will need to define some different templates for
each speed you
want to give out.
Then you will apply these
different templates to different services plans
based on the speed
you want to give out for that plan.
It is all in the
documentation.
Erik
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Steve J.
Drenner
Sent: Monday, November 08, 2004 2:27 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi]
IS anyone doing?
Can you give me an example of how to set that up?
And then how would that
pass onto radius, I am using virom Radius
4.0
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Behalf Of Erik Tijburg
Sent:
Monday, November 08, 2004 2:22 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi]
IS anyone doing?
You would do this with radius Attributes not
plan details.
Erik
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Steve J.
Drenner
Sent: Monday, November 08, 2004 2:08 PM
To: Rodopi
Forum
Subject: [Rodopi] IS anyone doing?
I have written to the
forum lately asking some questions about how to make a
certain billing
plan and how to at a new fee option. With no responses form
anyone.
So
I am going to try yet an other question, and how to get some
feedback.
I am running rodopi 5.4
I need to create a new attribute
or Plan Detail item not sure which it would
go under.
Here is what
I need to do, I am setting up a WIFI hotspot using a
www.demarctech.com ReliawaveT RWV
802.11a/b/g Outdoor AP/Router/Hotspot
Controller
This unit will do
Radius Authentication and IP Accounting, I have this
working and works
great. What I need now is to get an attribute or plan
detail
created to set users bandwidth TX & RX it needs to be something
like:
DTG-PPPoE-CBQ-TX = xx
DTG-PPPoE-CBQ-RX = xx
My hope
is, is that someone out there is doing something like this and
would
share there
thoughts..
Thanks
------------------------------------
Midwaynet.net
/ Midway Electronics Inc.
Steve J. Drenner
Director of Internet
Service
[EMAIL PROTECTED]
1250 N
McKinley Ave
Rensselaer IN 47978
tel: 219-866-3716
fax:
219-866-0319
mobile: 219-866-9079
www.midwaynet.net
------------------------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ
at http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ
at http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ
at http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ
at http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ
at http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with
the word LEAVE as the message body.
Please also visit the Rodopi FAQ
at http://www.rodopi-faq.com
---------------------
---------------------
To
Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with the word LEAVE as the message body.
Please also visit the
Rodopi FAQ at http://www.rodopi-faq.com
---------------------
|
