> Morning All,
> I have been doing more testing of Rev 119, Linux, using both ROS4.02 and
> 4.39.
> There seems to be some problems relating to modules.
> ROS4.39 reports "Soft-load driver not present" when I select the CD-ROM
> drive, but !Zap reports that all the same CDFS modules that are on my
> RISCPC
> are present. CDFSSoftATAPI and CDFSSoftCS12 are there. I have searched my
> RISCPC 4.39 !Boot and there are no CDFS modules loaded from there so all
> this
> stuff must be in the roms. Is it possible rpcemu isn't reading or using all
> the rom properly?
> I'm not sure if this is a related problem or not, but thought I would try
> !TechWriter. If I try to start !TW in rpcemu it complains that "File
> 'System:Modules.CallASWI' Not found", but when I copy that module from my
> 4.39 !Boot, reboot rpcemu (using 4.39 roms) and the start !TW it complains
> that "CallASWI module will only work on RISC OS 3.1, 3.5 or 3.6"...yet the
> same !TW works OK on my RPC with that module present. Am I missing
> something
> here or is likely to be another artifact of rpcemu being a bit wrong
> somewhere...not really knowing which version OS it is or somesuch?
I think this may be down to the !Boot version. I've had trouble running 4.39
with the universal boot, you need the actual 4.39 !Boot.
Tom
___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try it
now.
http://uk.answers.yahoo.com/
_______________________________________________
Rpcemu mailing list
[email protected]
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
