A new version of RPCEmu is available, X.X.X
http://www.marutan.net/rpcemu/
* All Platforms
- RISC OS Select 4i2 to 6i1 (6.06 to 6.20) now boot 'out of the box' due
to clearing the *unplug bits in the distributed cmos.ram file.
If applying the upgrade to an existing install you must use the
provided cmos.ram file and then apply your changes to cmos settings
afterwards.
If you have used the 'installer' version on Windows Vista, 7, 8, 10
then you will probably need to delete the copy of cmos.ram that is in
this directory
C:\Users\<USERNAME>\AppData\Local\VirtualStore\Program Files (x86)\RPCEmu
- Add support for 8MB VRAM (via patching) on RISC OS 3.50/3.60/3.70/3.71/
4.04/4.29/4.33/4.37/4.39/6.02. This is in addition to the support for
RISC OS 4.02 (via patching) and RISC OS 5.2x and 6.10 to 6.20 via OS
autodetection.
- RISC OS 5.2x now works with 0MB VRAM as we now allow video data to be
stored in any part of Simm 0 Bank 0 of RAM.
- RISC OS Select 4i2 to 6i1 (6.06 to 6.20) now work with 0MB VRAM as we
no longer create TLB entries for VRAM when none is configured.
- Translate characters in HostFS paths that would be invalid on Windows,
using the same translations for ? < and > as used by LanMan.
Contributed by Alan Buckley.
Note: Using the windows install to upgrade from
previous versions may overwrite your cmos.ram
and rpc.cfg files.
Matthew Howkins
Peter Howkins
--
Peter Howkins
[email protected]
_______________________________________________
Rpcemu mailing list
[email protected]
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
