In article <[email protected]>, Dave Symes <[email protected]> wrote: > In article <[email protected]>, > Peter Howkins <[email protected]> wrote:
> [Snippy] > > - RISC OS Select 4i2 to 6i1 (6.06 to 6.20) now boot 'out of the box' > > due to clearing the *unplug bits in the distributed cmos.ram file. > > If applying the upgrade to an existing install you must use the > > provided cmos.ram file and then apply your changes to cmos settings > > afterwards. > [Snippy] > I've tried upgrading an existing 6.20 install with everything from the > new archive except (Obviously) HostFS and the 6.20 Rom. > With your cmos.ram file in place it gets a little way through the boot > process then halts and fails with "Boot failed" > Sorry, no furthur info possible as it can't get past that point. > If I replace your cmos.ram file with the (my) original from the 0.8.13 > install then 0.8.14 boots perfectly okay. > ?? > Dave Well, Just tried it on a RPCEmu with RISC OS 5.22 installed and it fails as before. Replace cmos.ram with original and it works okay. ? Dave -- Dave Triffid _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
