I found the problem. Now for Chris to suggest the best fix. :) The realview rtems-tester configuration has the machine as xilinx-zynq-a9 not realview-pbx-a9.
Assuming the current realview is correct for the zynq BSP, then the current realview needs to be copied to zynq and an edit made. After that edit is made locally, now all the tests appear to be being reported as "invalid". This message is coming out audio: Count not init 'oss' audio driver but qemu is exiting with a 0 status. Also <ctl>-c has no impact. --joel On 5/30/2014 3:30 PM, Joel Sherrill wrote: > Hi > > I tried this earlier today and the tests were just timing out. > Does rtems-tester work with this BSP for anyone else? > > The BSP works find with the sim-scripts so the BSP and simulator > are OK. > > FWIW should audio be disabled on our qemu builds? I am > seeing warnings about not able to open the audio device > since I am ssh'ed in. > -- Joel Sherrill, Ph.D. Director of Research & Development joel.sherr...@oarcorp.com On-Line Applications Research Ask me about RTEMS: a free RTOS Huntsville AL 35805 Support Available (256) 722-9985 _______________________________________________ rtems-devel mailing list rtems-devel@rtems.org http://www.rtems.org/mailman/listinfo/rtems-devel