Does it work with plain 2.2.18 (no rtlinux)?
Alessandro Coppelli ([EMAIL PROTECTED]) wrote:
>
> Prof. Barabanov,
>
> I have a problem about RTLinux that I asked by maillist but
> nobody one
>
> has been able to help me to solve it. You are my last
> possibiliy.
>
> I have a PC with two kernel, the first the 2.2.17 , the
> default RedHat distribution , and the last
>
> compiled for RTLinux ( 2.2.18 + RTL3.0 ) . I have a real
> time application for the control
>
> a magnetic levitator . This application is a remote
> application .
>
> In order to allow the user to watch "as life" through his own
> computer I installed an
>
> Haupage board ( Bt878 ) that by the VIC ( videoconference
> ) application allows the vision
>
> When I use the board with the 2.2.17 kernel the video
> conference is possible, but when I use
>
> the same board ( I try with two Bt878 board ) something is
> wrong and the vision is impossible.
>
> I tried to change the interrupt, to verify the possible I/O
> conflits, I even tried to change the
>
> board but until now nothing t o do. !
>
> Are you able to help me to understand what is happening, why
> the Hauppage board does not
>
> work under RTLinux ?
>
>
> Thank you for your help .
>
>
>
> Alessandro Coppelli
>
> -- [rtl] ---
> To unsubscribe:
> echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> --
> For more information on Real-Time Linux see:
> http://www.rtlinux.org/rtlinux/
-- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
--
For more information on Real-Time Linux see:
http://www.rtlinux.org/rtlinux/
