hello,
i need to make the communication wireless between a master and slave with the
experimental hardware rt2500 .
i do the configuration of the ralink rt2500 card with this steps:
1. I remove the non-realtime network card's device drivers and modules (rmmod
8139too, rt2500).
2. I load the RTAI modules (rtai_hal.ko, rtai_lxrt.ko, rtai_sem.ko,
rtai_rtdm.ko).
3. I load the RTNET modules (rtnet.ko, rtipv4.ko, rtpacket.ko).
4. I load the rt2500 card drivers realtime (rt_rt2x00core.ko, rt_rt2500pci.ko,
rt_loopback.ko).
5. I configure the rtwlan0 interfaces with rtifconfig and rtiwconfig.
I can do "./rtping <IP_ADDR_LOCAL>" to ping the local loopback successfully,
when i call "lsmod" , i find the realtime driver of the network card in the
loaded module list.
But when i want check the communication between the nodes an i run "./rtping
<IP_ADDR_SLAVE>", the computer crashes and i must restart the computer also
when i want to make the configuration of the routing table with "./rtroute
solicit <IP_ADDR_SLAVE> dev rtwlan0" the computer crashes.
I do not know what is the problem or i am wrong because with this steps the
communication in the wired network with RTNET working properly.
Thanks for the help!!
Julian Felipe Echeverry Studente Laurea Specialistica Ingegneria
Meccatronica Politecnico Di torino Torino, Italia
_________________________________________________________________
Hotmail: posta elettronica attendibile grazie alla protezione avanzata
Microsoft dalla posta indesiderata.
https://signup.live.com/signup.aspx?id=60969------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
RTnet-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/rtnet-developers
