Bill, Everyone,
I have a AB set of E-9's and a set of E-3/6's and I found the
chsssis for all the units are the same design. I have had very little
problem with coupler height. My guess would be to check the angled
brass strip on the body shell that contains the screw holes. If that
strip is soldered in the wrong position the body and the couplers will
be at the wrong height. That being said if the coupler is low I would
think the pilot would drag on the rails.
Bob Werre
Bill Lane wrote:
>Hi All,
>
>As previously posted last week, I have been running my A B A set of Overland
>E7. However I very surprised to learn that the pilot couplers on the A units
>were VERY low, almost a full coupler too low. Has anyone else had this
>problem? I modified the front coupler mounting brackets, so they are correct
>now. I used the SHS new brown couplers from the F units, so they couple nice
>and tight now.
>
>Thank You,
>Bill Lane
>
>Modeling the Mighty Pennsy in S Scale in 1957
>
>See my finished models at http://www.lanestrains.com
>
>Importing a Brass S Scale PRR X29
>http://www.pennsysmodels.com
>The freight versions are currently in production
>
>***Join the PRR T&HS***
>The other members are not ALL like me!
>http://www.prrths.com
>
>
>
>
>
>The poll results are in....... To REPLY to the list, use REPLY ALL, to reply
>to the sender, use REPLY. I do NOT know if this works on all e-mail software,
>but it works on some of the most common ones. For those of you on DIGEST
>mode, all REPLY messages go to the list.
>
>Change your membership, change your message settings, use our CALENDAR, view
>shared files or photos, view the list archives, GO TO
>http://groups.yahoo.com/group/S-Scale/
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
The poll results are in....... To REPLY to the list, use REPLY ALL, to reply
to the sender, use REPLY. I do NOT know if this works on all e-mail software,
but it works on some of the most common ones. For those of you on DIGEST mode,
all REPLY messages go to the list.
Change your membership, change your message settings, use our CALENDAR, view
shared files or photos, view the list archives, GO TO
http://groups.yahoo.com/group/S-Scale/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
