Hi Jace; While I understand the point about the curves, you statement about the flanges does NOT match the info I find on Proto48
http://www.proto48.org/p48_information.htm BTW, there are lots of good ideas (and good modeling) on this site, much usable in S. Pieter E. Roos --- On Wed, 9/22/10, JGG KahnSr <[email protected]> wrote: <SNIP> > Even P/48 drivers in O > scale have flanges that are oversize (just rather less than > standard O ones), requiring some > compromise on spacing. I doubt even large scale/"G" > (and F and all the other rubber scales at that end of > modeling) could quite use exact > scale driver flanges, as our model curves are so much > tighter than prototype. > > Jace Kahn ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
