Thanks for sharing this information.
 
I am very amateurish as a decal maker and would only do it for  myself.  I 
have been successful in making decals with black  letterboards.  I have not 
tried color.  However I have given it a lot  of thought, though my thinking 
may or may not be good on the subject.  
 
One of my thoughts, if I was to try to make my own color decals would be to 
 first print the decals larger than the desired size, preferably double.   
This would be on my inkjet printer because I do not have a laser printer.   
Then I would take the printed image to Office Max (or similar store) and  
get them to copy it on their laser printer at 50% reduction on decal paper I  
would probaly have to supply.  I would also have them print the image  twice 
(or more) on each printed page to increase the color satuation.  Then I 
would spray the printed page with decal film.
 
Has anyone tried this?
 
 - Earl Henry, Nashville
==================================   
 
 
In a message dated 11/18/2010 6:24:30 A.M. Central Standard Time,  
[email protected] writes:

 
 
 
Gentlemen and (if we are so lucky) ladies:
The old decals are quite  usable. Purchase a pack. Take a small corner of 
clear decal and drop it  into water. If it stays a nice piece then the 
decal can 
be used  'as-is'.

If it turns into dust in water it can be easily fixed.  Purchase a can of 
Testors Decal Bonder. It is a spray can. Walk outside  with the decal sheet 
and 
give it a light spray from the can. (I emphasize  light.) This puts a new 
layer 
of decal film on top of the old decal. If  you use too much then the decal 
will 
be thick and you cannot hide the  edge. Once dry, trim and apply the decals 
as 
directed.

You can also  use the whole Testors decal system and make decals with your 
InkJet  
printer. (There is a different technique for Laser printers.) I now make  m
any 
of my own decals using Microsoft Word on my Linux Laptop and my HP  InkJet 
color 
printer. I can get any color EXCEPT white.

You can not  get white out an InkJet because the inks are really washes. 
Very, 
very  thin with lots of color. Think water. They are actually transparent. 
White  cannot be transparent. White cannot be done as a 'color' in a water 
like  
ink. White has to be a thick paint that is printed (like a printing press)  
rather than thrown. So I have to do white from decal sets, white  
background 
decal paper, hand painting, or individual letters from decal  and dry 
transfer 
lettering sets. (Using white background decal paper I  make 'roll signs' 
for my 
trolleys. I create the words as inverse (white on  black) in my Word 
Processor. 
Print it on the white decal film. Trim and  apply. Touch up the edges with 
black paint. It looks great. Black is  practical. However it is very hard 
to 
match the painted color of a car so  you can have, say, Milwaukee orange 
and 
white. Especially since the colors  change slightly from maker to maker and 
batch to batch.)

Last, I am  one of the lurkers. With a daughter with special needs, I don't 
have 
much  modeling time nor time to respond to the list.
Thorin




[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/S-Scale/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/S-Scale/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected] 
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

Reply via email to