Chris is correct, the paper that requires the most ink is a matte type,
so set your printer as if matte paper was being used. High gloss uses
the least amount of ink. Of course some printers can be set for
low-to-high quality. Again the high quality or slowest setting will be
the best.
If you do a lot of printing some popular printers have 'after market'
continuous ink system. However some are junk and don't work right, but
the good ones will save lot's of money for volume users.
Bob Werre
BobWphoto.com
On 11/18/10 4:05 PM, cfborg100 wrote:
>
> Earl,
> . Use the white decal paper whenever possible to get a more opaque
> color. You might also experiment with the print settings on your
> printer testing different paper types until you find a good balance
> between color saturation and wetness. Each different paper type alters
> the amount of ink the printer uses. Some types call for more ink, some
> less. Also, check the head alignment and clean the heads before your
> final run. This can eliminate that banding you sometimes see with inkjets.
>
> The above all combined seem to give me excellent inkjet printing results.
>
> Chris Borgmeyer
> Westfield Center, OH
>
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/