I'm trying to paint some `S'-scale machinery using Model Masters `Interior
Green' 2062 and keep getting fine brush stroke lines on the large flat surfaces
of this equipment. These brush stroke lines don't appear to have any dept, but
consists of higher gloss and lower gloss strokes of paint.
While I primed each piece well, the paint would begin to set very quickly,
causing it to "tug" when I attempted to brush over an area to ensure an even
coat.
To correct this, I deluded to paint 50/50 with Testors Enamel Thinner and Brush
Cleaner, mixed it very thoroughly, yet the problem persists.
Usually, I use Model Masters spray cans to cover larger flat areas like this,
but this color is not available in the cans.
Any suggestions?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
