I just finished wiring my first module and want to test this, to make sure it
is functioning properly.
I'll post pictures ASAP, of both sides of the module, but let me try to
describe it.
The module will almost connect my club's two track mainline with an initially
parallel single track line. The track almost forms a `reverse Z', with the two
track line on the bottom, the single track line on the top, and the connecting
line running between the two, but, since I couldn't squeeze in the second
switch, the top angle of the reverse Z will actually connect on the next module.
Thus, I have four tracks and a single switch joining two of them. Also, I'm
currently trying to build one of those switch throws that reverses polarity
when it's thrown.
I want to test the wiring on this module, which needs to work with my club's
DCC system, but do not have access to a DCC system of my own.
Using just DC, could I thoroughly test the system by operating an engine with
the DC electrical system connected only to the wires, and then only to the
rails during two separate tests?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
