Here are some updated pictures of the module and the wiringÂ… http://groups.yahoo.com/group/S-Scale/photos/album/1242695321/pic/list
Enjoy... ~JJ~ --- In [email protected], "empirebuilderjjhill" <empirebuilderjjhill@...> wrote: > > I just finished wiring my first module and want to test this, to make sure it > is functioning properly. > > I'll post pictures ASAP, of both sides of the module, but let me try to > describe it. > > The module will almost connect my club's two track mainline with an initially > parallel single track line. The track almost forms a `reverse Z', with the > two track line on the bottom, the single track line on the top, and the > connecting line running between the two, but, since I couldn't squeeze in the > second switch, the top angle of the reverse Z will actually connect on the > next module. > > Thus, I have four tracks and a single switch joining two of them. Also, I'm > currently trying to build one of those switch throws that reverses polarity > when it's thrown. > > I want to test the wiring on this module, which needs to work with my club's > DCC system, but do not have access to a DCC system of my own. > > Using just DC, could I thoroughly test the system by operating an engine with > the DC electrical system connected only to the wires, and then only to the > rails during two separate tests? > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
