Good afternoon! THE SUPPLY CAR is now offering cast W corner 4/5 ends with proper details in S for $5.95 per pair plus S/H. We showed the parts at the recent NASG Convention in CHATTANOOGA. The ends and the roof we also showed with a prototype roof are for our GN 1937 boxcar kit that is due out by the end of the year.
Thanks, Bob McCarthy THE SUPPLY CAR ________________________________ From: Pieter Roos <[email protected]> To: [email protected] Sent: Wednesday, September 5, 2012 1:51 PM Subject: Re: {S-Scale List} Freight car parts Hi Ed; Nah, just not up on car parts! That appears to be 4/5 Dreadnaught end, also available in S on the 10' IH 40 ft AAR boxcar models. The American Models car and the 50 ft PRS cars have Improved Dreadnaught Ends (IDE). Pieter E. Roos --- On Wed, 9/5/12, Ed Kozlowsky <[email protected]> wrote: >From: Ed Kozlowsky <[email protected]> >Subject: Re: {S-Scale List} Freight car parts >To: "[email protected]" <[email protected]> >Date: Wednesday, September 5, 2012, 1:40 PM > > > > > >I know I'm dumb as a post, but what kind of end is that? > >Ed Kozlowsky >Sanford, Maine >sscale.org > > >From: Bob Werre <[email protected]> >>To: [email protected] >>Sent: Wednesday, September 5, 2012 1:27 PM >>Subject: Re: {S-Scale List} Freight car parts [1 Attachment] >> >> >> >>As I promised before the holiday weekend, I would attach a photo of the >>freight car parts formerly produced for a kit that the Houston S >>Gaugers were in the process of producing. I would assume, at this >>point, that more could be made. >> >>As you can see the parts are sharply detailed and the car end has the >>uncoupler bar bracket, the brake bell crank, poling pockets and the >>connection for the airline all attached. The bolster coupler pocket >>piece was designed for the Kadee #5 coupler. I cut these and used them >>individually where needed. >> >>Bob Werre >>PhotoTraxx >> >> >> > >
