Dave: The part number for the standard coupler is;
Standard Type 4 Pair (Enough for 4 Cars) Walthers Part # 920-6001, p. 239 Walthers 2012 HO Scale Reference HO scale, $6.98, currently in stock at Walthers They are corrently shown as on sale @ $3.98 for four pair. I have been using them (and the short shank variation) for several years. I have usually had to ream the center mounting holes with a 2-56 clearance drill for 2-56 machine screws, although I suppose 1-72 screws would work if the holes in Ace conversions would hold a 1-72 thread. I've never tried that. Also, the coupler boxes are too wide for the side mounting holes to line up with the alignment bosses on Ace conversions. I usually remove these flush with the coupler mounting surface. Bob Nicholson ____________________________________________ --- In [email protected], "David Engle" <rirocket@...> wrote: > > Who on here is using them? I can't get to the individual parts listings on > Walthers, the old rig here is having fits with all the error traps and guided > entries. DJE > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
