Way to go Peter. I'm very interested in this technology so I'm glad to see you
took the plunge. The BPS board sounds like the way to go if it will handle the
amp load of "S" scale locos.
Very interested to see how your installation goes. I found the info and product
explanation on your website to be very helpful (as always) and you actually
explained some items better than the S-Cab website.
I figure if the BPS isn't large enough (amp wise) to handle a SHS F3 loco and
if there isn't enough room inside the "A" unit for a larger battery, board and
speaker, I'd just make a dummy out of a "B" unit and put the battery(s) in it
and run jumpers to the "A" unit. I'd like to run an ABA or even ABBA and I
don't care if they all carry the same address as they'll be a permanent consist
on my layout.
Look forward to your progress.
Butch Holtgrieve
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
