Bill,
Glad you included a photo with that. What is it they say: "a picture is
worth a thousand words". So you made a collar to fit over the acetyl
plastic pronged molding then bored through it to the shaft and threaded
the collar for set screws? I know: "that's what I said", but I'm just
trying to get it straight for the probably hundreds of us who have one
or more of these causing problems.
Another solution I used on the RR Allegheny models is to drill through
the coupling and the shaft with a carbide micro drill and insert a wire
to secure the whole thing.
And if we just had somebody to make us the equivalent of little bitty
hose clamps life would be even better -- NWSL/OSO are you listening?
Chris Rooney
--
Email: [email protected] www.VannessCompany.com
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
