Make sure you're using the correct bulb. Does anyone have any experience with the recommended lamp doing this?
"John G " wrote: > > I just bought a # 499 New Haven engine. > > When I removed the plastic shell, I noticed that there was slight > melting of the plastic above each of the headlamp light bulbs. The > melting was not enough to disfigure the external plastic (at least so > far). > > Is there any remedy to mitigate this? I was considering gluing a > small piece of heavy tin foil in the area to dissipate the heat. > > John Gasal > > S-Trains list sponsor: http://www.americanflyertrains.com > All the Flyer you desire...books and accessories too! > > To UNSUBSCRIBE from this list send a note to [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ -- Chuck Smith of the NASG, Rochester Area S Gaugers (RASG) and the S Gauge Chemung Valley Lines. http://home.eznet.net/~cesmith "It is often wiser to remain silent and be thought a fool than to speak up and remove all doubt." Mark Twain S-Trains list sponsor: http://www.americanflyertrains.com All the Flyer you desire...books and accessories too! To UNSUBSCRIBE from this list send a note to [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
