You need rwo Lionel railsounds buttons if you use a Flyer transformer. One for the horn or whistle and one for the bell. Which is which depends on the direction the loco is facing because they're polarity sebsitive. Alternatively, you could use an American Models 2 button sound controller.
"waldootten " wrote: > > What gizmo do I need to trigger the railsounds units in the AF sets > made by Lionel from the late 1980s to present? > > I have both a Flyer 30B and a MRC dual power 027 transformer, plus > about three dozen smaller AF transformers. I also have two sound > boards made for my American Models steam and diesel locomotives. > > Thanks > > Phil K > > S-Trains list sponsor: http://www.americanflyertrains.com > All the Flyer you desire...books and accessories too! > > To UNSUBSCRIBE from this list send a note to [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ -- Chuck Smith of the NASG, Rochester Area S Gaugers (RASG) and the S Gauge Chemung Valley Lines. http://home.eznet.net/~cesmith "It is often wiser to remain silent and be thought a fool than to speak up and remove all doubt." Mark Twain S-Trains list sponsor: http://www.americanflyertrains.com All the Flyer you desire...books and accessories too! To UNSUBSCRIBE from this list send a note to [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
