As I wrote before: "If the problem persists, please send the top-level config.log file"
On Thursday, June 2, 2022 at 10:59:34 AM UTC-7 ijoll...@gmail.com wrote: > Unfortunately, this error continues to persist. My machine (M1 mac) is not > able to find ppl and Sage is not able to build it from source. The error > log suggests to write here so just making an attempt. It would be lovely if > some could please assist me with this. > > ``` > > [ppl-1.2.p1] C compiler: arm64-apple-darwin20.0.0-clang > [ppl-1.2.p1] C compiler version: > [ppl-1.2.p1] clang version 13.0.1 > [ppl-1.2.p1] Target: arm64-apple-darwin20.0.0 > [ppl-1.2.p1] Thread model: posix > [ppl-1.2.p1] InstalledDir: /Users/ishaanjolly/miniforge3/envs/ox/bin > [ppl-1.2.p1] **************************************************** > > [ppl-1.2.p1] Package 'ppl' is currently not installed > [ppl-1.2.p1] No legacy uninstaller found for 'ppl'; nothing to do > [ppl-1.2.p1] Configuring ppl-1.2.p1 > [ppl-1.2.p1] configure: WARNING: unrecognized options: > --disable-maintainer-mode > [ppl-1.2.p1] checking build system type... Invalid configuration > `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized > [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub > arm64-apple-darwin20.0.0 failed > > [ppl-1.2.p1] checking build system type... Invalid configuration > `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized > [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub > arm64-apple-darwin20.0.0 failed > [ppl-1.2.p1] > ******************************************************************************** > > [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file > [ppl-1.2.p1] > /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log > [ppl-1.2.p1] for details. > [ppl-1.2.p1] > ******************************************************************************** > > [ppl-1.2.p1] Error configuring PPL with both C and C++ interfaces, trying > [ppl-1.2.p1] again with only the C++ interface. > [ppl-1.2.p1] Configuring ppl-1.2.p1 > [ppl-1.2.p1] configure: WARNING: unrecognized options: > --disable-maintainer-mode > [ppl-1.2.p1] checking build system type... Invalid configuration > `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized > [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub > arm64-apple-darwin20.0.0 failed > > [ppl-1.2.p1] checking build system type... Invalid configuration > `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized > [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub > arm64-apple-darwin20.0.0 failed > [ppl-1.2.p1] > ******************************************************************************** > > [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file > [ppl-1.2.p1] > /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log > [ppl-1.2.p1] for details. > [ppl-1.2.p1] > ******************************************************************************** > [ppl-1.2.p1] > [ppl-1.2.p1] real 0m1.068s > [ppl-1.2.p1] user 0m0.254s > [ppl-1.2.p1] sys 0m0.322s > > [ppl-1.2.p1] > ************************************************************************ > [ppl-1.2.p1] Error installing package ppl-1.2.p1 > [ppl-1.2.p1] > ************************************************************************ > [ppl-1.2.p1] Please email sage-devel ( > http://groups.google.com/group/sage-devel) > [ppl-1.2.p1] explaining the problem and including the log files > [ppl-1.2.p1] /Users/ishaanjolly/sage/logs/pkgs/ppl-1.2.p1.log > [ppl-1.2.p1] and > [ppl-1.2.p1] /Users/ishaanjolly/sage/config.log > > [ppl-1.2.p1] Describe your computer, operating system, etc. > [ppl-1.2.p1] If you want to try to fix the problem yourself, *don't* just > cd to > [ppl-1.2.p1] /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1 > and type 'make' or whatever is appropriate. > > [ppl-1.2.p1] Instead, the following commands setup all environment > variables > [ppl-1.2.p1] correctly and load a subshell for you to debug the error: > [ppl-1.2.p1] (cd > '/Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1' && > '/Users/ishaanjolly/sage/sage' --buildsh) > > [ppl-1.2.p1] When you are done debugging, you can type "exit" to leave the > subshell. > [ppl-1.2.p1] > ************************************************************************ > make[4]: *** [ppl-SAGE_LOCAL-no-deps] Error 1 > make[3]: *** > [/Users/ishaanjolly/sage/local/var/lib/sage/installed/ppl-1.2.p1] Error 2 > > make[2]: *** [all-start] Error 2 > > real 0m3.750s > user 0m2.353s > sys 0m0.732s > > *************************************************************** > Error building Sage. > > The following package(s) may have failed to build (not necessarily > during this run of 'make all-start'): > > * package: ppl-1.2.p1 > last build time: 2 Jun 18:37 > log file: /Users/ishaanjolly/sage/logs/pkgs/ppl-1.2.p1.log > build directory: > /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1 > > > It is safe to delete any log files and build directories, but they > contain information that is helpful for debugging build problems. > WARNING: If you now run 'make' again, the build directory of the > same version of the package will, by default, be deleted. Set the > environment variable SAGE_KEEP_BUILT_SPKGS=yes to prevent this > > ``` > > Please see the attached ppl-1.2 p1.log file below. > > Thank you for your time! > > On Monday, 16 May 2022 at 19:13:53 UTC+1 Matthias Koeppe wrote: > >> Please take a look at the notes for the Apple Silicon platform at >> https://trac.sagemath.org/wiki/ReleaseTours/sage-9.6#Sources >> If the problem persists, please send the top-level config.log file >> >> On Saturday, May 14, 2022 at 1:14:12 PM UTC-7 ijoll...@gmail.com wrote: >> >>> Hi, >>> >>> I am very new to Sage, and software development in particular. I >>> recently tried cloning the GitHub repo, and installing Sage from root. >>> However, on running make, I failed. I was wondering if some assitance could >>> be provided. Here is the error message: >>> >>> [ppl-1.2.p1] Package 'ppl' is currently not installed >>> [ppl-1.2.p1] No legacy uninstaller found for 'ppl'; nothing to do >>> [ppl-1.2.p1] Configuring ppl-1.2.p1 >>> [ppl-1.2.p1] configure: WARNING: unrecognized options: >>> --disable-maintainer-mode >>> [ppl-1.2.p1] checking build system type... Invalid configuration >>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>> arm64-apple-darwin20.0.0 failed >>> [ppl-1.2.p1] checking build system type... Invalid configuration >>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>> arm64-apple-darwin20.0.0 failed >>> [ppl-1.2.p1] >>> ************************************************************************************* >>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file >>> [ppl-1.2.p1] >>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log >>> [ppl-1.2.p1] for details. >>> [ppl-1.2.p1] >>> ************************************************************************************* >>> [ppl-1.2.p1] Error configuring PPL with both C and C++ interfaces, trying >>> [ppl-1.2.p1] again with only the C++ interface. >>> [ppl-1.2.p1] Configuring ppl-1.2.p1 >>> [ppl-1.2.p1] configure: WARNING: unrecognized options: >>> --disable-maintainer-mode >>> [ppl-1.2.p1] checking build system type... Invalid configuration >>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>> arm64-apple-darwin20.0.0 failed >>> [ppl-1.2.p1] checking build system type... Invalid configuration >>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>> arm64-apple-darwin20.0.0 failed >>> [ppl-1.2.p1] >>> ************************************************************************************* >>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file >>> [ppl-1.2.p1] >>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log >>> [ppl-1.2.p1] for details. >>> [ppl-1.2.p1] >>> ************************************************************************************* >>> [ppl-1.2.p1] >>> [ppl-1.2.p1] real 0m1.080s >>> [ppl-1.2.p1] user 0m0.244s >>> [ppl-1.2.p1] sys 0m0.302s >>> [ppl-1.2.p1] >>> ************************************************************************ >>> [ppl-1.2.p1] Error installing package ppl-1.2.p1 >>> [ppl-1.2.p1] >>> ************************************************************************ >>> [ppl-1.2.p1] Please email sage-devel ( >>> http://groups.google.com/group/sage-devel) >>> [ppl-1.2.p1] explaining the problem and including the log files >>> [ppl-1.2.p1] /Users/ishaanjolly/Programs/sage/logs/pkgs/ppl-1.2.p1.log >>> [ppl-1.2.p1] and >>> [ppl-1.2.p1] /Users/ishaanjolly/Programs/sage/config.log >>> [ppl-1.2.p1] Describe your computer, operating system, etc. >>> [ppl-1.2.p1] If you want to try to fix the problem yourself, *don't* >>> just cd to >>> [ppl-1.2.p1] >>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1 and >>> type 'make' or whatever is appropriate. >>> [ppl-1.2.p1] Instead, the following commands setup all environment >>> variables >>> [ppl-1.2.p1] correctly and load a subshell for you to debug the error: >>> [ppl-1.2.p1] (cd >>> '/Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1' && >>> '/Users/ishaanjolly/Programs/sage/sage' --buildsh) >>> [ppl-1.2.p1] When you are done debugging, you can type "exit" to leave >>> the subshell. >>> [ppl-1.2.p1] >>> ************************************************************************ >>> make[4]: *** [ppl-SAGE_LOCAL-no-deps] Error 1 >>> make[3]: *** >>> [/Users/ishaanjolly/Programs/sage/local/var/lib/sage/installed/ppl-1.2.p1] >>> Error 2 >>> make[2]: *** [all-start] Error 2 >>> >>> real 3m17.156s >>> user 2m26.222s >>> sys 0m18.146s >>> *************************************************************** >>> Error building Sage. >>> >>> The following package(s) may have failed to build (not necessarily >>> during this run of 'make all-start'): >>> >>> * package: ppl-1.2.p1 >>> last build time: 14 May 20:50 >>> log file: >>> /Users/ishaanjolly/Programs/sage/logs/pkgs/ppl-1.2.p1.log >>> build directory: >>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1 >>> >>> It is safe to delete any log files and build directories, but they >>> contain information that is helpful for debugging build problems. >>> WARNING: If you now run 'make' again, the build directory of the >>> same version of the package will, by default, be deleted. Set the >>> environment variable SAGE_KEEP_BUILT_SPKGS=yes to prevent this. >>> >>> make[1]: *** [all-start] Error 1 >>> make: *** [all] Error 2 >>> >>> And here is the log file: >>> >> -- You received this message because you are subscribed to the Google Groups "sage-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to sage-devel+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/sage-devel/c76bb005-727c-4200-8731-5dd165dadb3fn%40googlegroups.com.
