At the end of the configure run, the following message was printed:
hint: installing the following system packages, if not already present,
is recommended and may avoid having to build them (though some may have to
be built anyway):
$ brew install arb boost ecl flint fplll glpk gmp gsl xz libmpc mpfi mpfr
ntl openblas openssl pari pari-elldata pari-galdata pari-galpol
pari-seadata ppl python3 qhull r readline singular suite-sparse zeromq
On Sunday, June 5, 2022 at 12:06:23 PM UTC-7 ijoll...@gmail.com wrote:
> Hi Matthias,
>
> Thanks, I chose conda deactivate. I had base conda working so that's what
> caused the issue. Thanks for pointing it out. Unfortunately, I have still
> not managed to install Sage.
> It now says
> ```
> * package: openblas-0.3.20
> last build time: 5 Jun 20:02
> log file:
> /Users/ishaanjolly/SageMath/sage/logs/pkgs/openblas-0.3.20.log
> build directory:
> /Users/ishaanjolly/SageMath/sage/local/var/tmp/sage/build/openblas-0.3.20
>
> ```
> I already have openblas installed through brew. If you could please see
> the config.log file?
>
> On Saturday, 4 June 2022 at 21:36:59 UTC+1 Matthias Koeppe wrote:
>
>> As I said: "Either deactivate the conda environment [...]
>> or follow the instructions for conda [...]."
>>
>> Which of the two do you pick?
>>
>> On Saturday, June 4, 2022 at 11:56:23 AM UTC-7 ijoll...@gmail.com wrote:
>>
>>> When running ./configure it says to conda activate ENVIRONMENT. I
>>> thought due to this that sage built is dependent on conda for this reason.
>>> Clearly, this doesn't seem to be the case, so how might I get pass this?
>>>
>>> On Saturday, 4 June 2022 at 19:31:35 UTC+1 Matthias Koeppe wrote:
>>>
>>>> With the config.log posted, it looks like you are trying to use
>>>> homebrew together with conda.
>>>> Either deactivate the conda environment and follow the instructions for
>>>> homebrew,
>>>> or follow the instructions for conda in the Sage installation manual.
>>>>
>>>>
>>>> On Saturday, June 4, 2022 at 10:44:03 AM UTC-7 ijoll...@gmail.com
>>>> wrote:
>>>>
>>>>> Very sorry, it still doesn't work. Please find the config.log file
>>>>> along with this email. Would be very grateful if someone can please
>>>>> assist
>>>>> me. Thank you!
>>>>>
>>>>>
>>>>> On Friday, 3 June 2022 at 02:38:40 UTC+1 Matthias Koeppe wrote:
>>>>>
>>>>>> As I wrote before: "If the problem persists, please send the
>>>>>> top-level config.log file"
>>>>>>
>>>>>> On Thursday, June 2, 2022 at 10:59:34 AM UTC-7 ijoll...@gmail.com
>>>>>> wrote:
>>>>>>
>>>>>>> Unfortunately, this error continues to persist. My machine (M1 mac)
>>>>>>> is not able to find ppl and Sage is not able to build it from source.
>>>>>>> The
>>>>>>> error log suggests to write here so just making an attempt. It would be
>>>>>>> lovely if some could please assist me with this.
>>>>>>>
>>>>>>> ```
>>>>>>>
>>>>>>> [ppl-1.2.p1] C compiler: arm64-apple-darwin20.0.0-clang
>>>>>>> [ppl-1.2.p1] C compiler version:
>>>>>>> [ppl-1.2.p1] clang version 13.0.1
>>>>>>> [ppl-1.2.p1] Target: arm64-apple-darwin20.0.0
>>>>>>> [ppl-1.2.p1] Thread model: posix
>>>>>>> [ppl-1.2.p1] InstalledDir: /Users/ishaanjolly/miniforge3/envs/ox/bin
>>>>>>> [ppl-1.2.p1] ****************************************************
>>>>>>>
>>>>>>> [ppl-1.2.p1] Package 'ppl' is currently not installed
>>>>>>> [ppl-1.2.p1] No legacy uninstaller found for 'ppl'; nothing to do
>>>>>>> [ppl-1.2.p1] Configuring ppl-1.2.p1
>>>>>>> [ppl-1.2.p1] configure: WARNING: unrecognized options:
>>>>>>> --disable-maintainer-mode
>>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration
>>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized
>>>>>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub
>>>>>>> arm64-apple-darwin20.0.0 failed
>>>>>>>
>>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration
>>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized
>>>>>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub
>>>>>>> arm64-apple-darwin20.0.0 failed
>>>>>>> [ppl-1.2.p1]
>>>>>>> ********************************************************************************
>>>>>>>
>>>>>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file
>>>>>>> [ppl-1.2.p1]
>>>>>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log
>>>>>>> [ppl-1.2.p1] for details.
>>>>>>> [ppl-1.2.p1]
>>>>>>> ********************************************************************************
>>>>>>>
>>>>>>> [ppl-1.2.p1] Error configuring PPL with both C and C++ interfaces,
>>>>>>> trying
>>>>>>> [ppl-1.2.p1] again with only the C++ interface.
>>>>>>> [ppl-1.2.p1] Configuring ppl-1.2.p1
>>>>>>> [ppl-1.2.p1] configure: WARNING: unrecognized options:
>>>>>>> --disable-maintainer-mode
>>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration
>>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized
>>>>>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub
>>>>>>> arm64-apple-darwin20.0.0 failed
>>>>>>>
>>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration
>>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized
>>>>>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub
>>>>>>> arm64-apple-darwin20.0.0 failed
>>>>>>> [ppl-1.2.p1]
>>>>>>> ********************************************************************************
>>>>>>>
>>>>>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file
>>>>>>> [ppl-1.2.p1]
>>>>>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log
>>>>>>> [ppl-1.2.p1] for details.
>>>>>>> [ppl-1.2.p1]
>>>>>>> ********************************************************************************
>>>>>>> [ppl-1.2.p1]
>>>>>>> [ppl-1.2.p1] real 0m1.068s
>>>>>>> [ppl-1.2.p1] user 0m0.254s
>>>>>>> [ppl-1.2.p1] sys 0m0.322s
>>>>>>>
>>>>>>> [ppl-1.2.p1]
>>>>>>> ************************************************************************
>>>>>>> [ppl-1.2.p1] Error installing package ppl-1.2.p1
>>>>>>> [ppl-1.2.p1]
>>>>>>> ************************************************************************
>>>>>>> [ppl-1.2.p1] Please email sage-devel (
>>>>>>> http://groups.google.com/group/sage-devel)
>>>>>>> [ppl-1.2.p1] explaining the problem and including the log files
>>>>>>> [ppl-1.2.p1] /Users/ishaanjolly/sage/logs/pkgs/ppl-1.2.p1.log
>>>>>>> [ppl-1.2.p1] and
>>>>>>> [ppl-1.2.p1] /Users/ishaanjolly/sage/config.log
>>>>>>>
>>>>>>> [ppl-1.2.p1] Describe your computer, operating system, etc.
>>>>>>> [ppl-1.2.p1] If you want to try to fix the problem yourself, *don't*
>>>>>>> just cd to
>>>>>>> [ppl-1.2.p1]
>>>>>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1 and type
>>>>>>> 'make'
>>>>>>> or whatever is appropriate.
>>>>>>>
>>>>>>> [ppl-1.2.p1] Instead, the following commands setup all environment
>>>>>>> variables
>>>>>>> [ppl-1.2.p1] correctly and load a subshell for you to debug the
>>>>>>> error:
>>>>>>> [ppl-1.2.p1] (cd
>>>>>>> '/Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1' &&
>>>>>>> '/Users/ishaanjolly/sage/sage' --buildsh)
>>>>>>>
>>>>>>> [ppl-1.2.p1] When you are done debugging, you can type "exit" to
>>>>>>> leave the subshell.
>>>>>>> [ppl-1.2.p1]
>>>>>>> ************************************************************************
>>>>>>> make[4]: *** [ppl-SAGE_LOCAL-no-deps] Error 1
>>>>>>> make[3]: ***
>>>>>>> [/Users/ishaanjolly/sage/local/var/lib/sage/installed/ppl-1.2.p1] Error
>>>>>>> 2
>>>>>>>
>>>>>>> make[2]: *** [all-start] Error 2
>>>>>>>
>>>>>>> real 0m3.750s
>>>>>>> user 0m2.353s
>>>>>>> sys 0m0.732s
>>>>>>>
>>>>>>> ***************************************************************
>>>>>>> Error building Sage.
>>>>>>>
>>>>>>> The following package(s) may have failed to build (not necessarily
>>>>>>> during this run of 'make all-start'):
>>>>>>>
>>>>>>> * package: ppl-1.2.p1
>>>>>>> last build time: 2 Jun 18:37
>>>>>>> log file: /Users/ishaanjolly/sage/logs/pkgs/ppl-1.2.p1.log
>>>>>>> build directory:
>>>>>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1
>>>>>>>
>>>>>>>
>>>>>>> It is safe to delete any log files and build directories, but they
>>>>>>> contain information that is helpful for debugging build problems.
>>>>>>> WARNING: If you now run 'make' again, the build directory of the
>>>>>>> same version of the package will, by default, be deleted. Set the
>>>>>>> environment variable SAGE_KEEP_BUILT_SPKGS=yes to prevent this
>>>>>>>
>>>>>>> ```
>>>>>>>
>>>>>>> Please see the attached ppl-1.2 p1.log file below.
>>>>>>>
>>>>>>> Thank you for your time!
>>>>>>>
>>>>>>> On Monday, 16 May 2022 at 19:13:53 UTC+1 Matthias Koeppe wrote:
>>>>>>>
>>>>>>>> Please take a look at the notes for the Apple Silicon platform at
>>>>>>>> https://trac.sagemath.org/wiki/ReleaseTours/sage-9.6#Sources
>>>>>>>> If the problem persists, please send the top-level config.log file
>>>>>>>>
>>>>>>>> On Saturday, May 14, 2022 at 1:14:12 PM UTC-7 ijoll...@gmail.com
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I am very new to Sage, and software development in particular. I
>>>>>>>>> recently tried cloning the GitHub repo, and installing Sage from
>>>>>>>>> root.
>>>>>>>>> However, on running make, I failed. I was wondering if some assitance
>>>>>>>>> could
>>>>>>>>> be provided. Here is the error message:
>>>>>>>>>
>>>>>>>>> [ppl-1.2.p1] Package 'ppl' is currently not installed
>>>>>>>>> [ppl-1.2.p1] No legacy uninstaller found for 'ppl'; nothing to do
>>>>>>>>> [ppl-1.2.p1] Configuring ppl-1.2.p1
>>>>>>>>> [ppl-1.2.p1] configure: WARNING: unrecognized options:
>>>>>>>>> --disable-maintainer-mode
>>>>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration
>>>>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized
>>>>>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub
>>>>>>>>> arm64-apple-darwin20.0.0 failed
>>>>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration
>>>>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized
>>>>>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub
>>>>>>>>> arm64-apple-darwin20.0.0 failed
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> *************************************************************************************
>>>>>>>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log
>>>>>>>>> [ppl-1.2.p1] for details.
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> *************************************************************************************
>>>>>>>>> [ppl-1.2.p1] Error configuring PPL with both C and C++ interfaces,
>>>>>>>>> trying
>>>>>>>>> [ppl-1.2.p1] again with only the C++ interface.
>>>>>>>>> [ppl-1.2.p1] Configuring ppl-1.2.p1
>>>>>>>>> [ppl-1.2.p1] configure: WARNING: unrecognized options:
>>>>>>>>> --disable-maintainer-mode
>>>>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration
>>>>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized
>>>>>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub
>>>>>>>>> arm64-apple-darwin20.0.0 failed
>>>>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration
>>>>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized
>>>>>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub
>>>>>>>>> arm64-apple-darwin20.0.0 failed
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> *************************************************************************************
>>>>>>>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log
>>>>>>>>> [ppl-1.2.p1] for details.
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> *************************************************************************************
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> [ppl-1.2.p1] real 0m1.080s
>>>>>>>>> [ppl-1.2.p1] user 0m0.244s
>>>>>>>>> [ppl-1.2.p1] sys 0m0.302s
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> ************************************************************************
>>>>>>>>> [ppl-1.2.p1] Error installing package ppl-1.2.p1
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> ************************************************************************
>>>>>>>>> [ppl-1.2.p1] Please email sage-devel (
>>>>>>>>> http://groups.google.com/group/sage-devel)
>>>>>>>>> [ppl-1.2.p1] explaining the problem and including the log files
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> /Users/ishaanjolly/Programs/sage/logs/pkgs/ppl-1.2.p1.log
>>>>>>>>> [ppl-1.2.p1] and
>>>>>>>>> [ppl-1.2.p1] /Users/ishaanjolly/Programs/sage/config.log
>>>>>>>>> [ppl-1.2.p1] Describe your computer, operating system, etc.
>>>>>>>>> [ppl-1.2.p1] If you want to try to fix the problem yourself,
>>>>>>>>> *don't* just cd to
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1
>>>>>>>>> and
>>>>>>>>> type 'make' or whatever is appropriate.
>>>>>>>>> [ppl-1.2.p1] Instead, the following commands setup all environment
>>>>>>>>> variables
>>>>>>>>> [ppl-1.2.p1] correctly and load a subshell for you to debug the
>>>>>>>>> error:
>>>>>>>>> [ppl-1.2.p1] (cd
>>>>>>>>> '/Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1'
>>>>>>>>> &&
>>>>>>>>> '/Users/ishaanjolly/Programs/sage/sage' --buildsh)
>>>>>>>>> [ppl-1.2.p1] When you are done debugging, you can type "exit" to
>>>>>>>>> leave the subshell.
>>>>>>>>> [ppl-1.2.p1]
>>>>>>>>> ************************************************************************
>>>>>>>>> make[4]: *** [ppl-SAGE_LOCAL-no-deps] Error 1
>>>>>>>>> make[3]: ***
>>>>>>>>> [/Users/ishaanjolly/Programs/sage/local/var/lib/sage/installed/ppl-1.2.p1]
>>>>>>>>>
>>>>>>>>> Error 2
>>>>>>>>> make[2]: *** [all-start] Error 2
>>>>>>>>>
>>>>>>>>> real 3m17.156s
>>>>>>>>> user 2m26.222s
>>>>>>>>> sys 0m18.146s
>>>>>>>>> ***************************************************************
>>>>>>>>> Error building Sage.
>>>>>>>>>
>>>>>>>>> The following package(s) may have failed to build (not necessarily
>>>>>>>>> during this run of 'make all-start'):
>>>>>>>>>
>>>>>>>>> * package: ppl-1.2.p1
>>>>>>>>> last build time: 14 May 20:50
>>>>>>>>> log file:
>>>>>>>>> /Users/ishaanjolly/Programs/sage/logs/pkgs/ppl-1.2.p1.log
>>>>>>>>> build directory:
>>>>>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1
>>>>>>>>>
>>>>>>>>> It is safe to delete any log files and build directories, but they
>>>>>>>>> contain information that is helpful for debugging build problems.
>>>>>>>>> WARNING: If you now run 'make' again, the build directory of the
>>>>>>>>> same version of the package will, by default, be deleted. Set the
>>>>>>>>> environment variable SAGE_KEEP_BUILT_SPKGS=yes to prevent this.
>>>>>>>>>
>>>>>>>>> make[1]: *** [all-start] Error 1
>>>>>>>>> make: *** [all] Error 2
>>>>>>>>>
>>>>>>>>> And here is the log file:
>>>>>>>>>
>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"sage-devel" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to sage-devel+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/sage-devel/a94457a7-6a53-462e-b5a6-c87c96259dcan%40googlegroups.com.
