I may have been imprecise. To clarify, zn_poly built, then displayed this message: Calibrating cycle counter... ok (3.84e+18) KS mul: ............................... KS sqr: ............................... Nussbaumer mul: ............................... Nussbaumer sqr: ............................... KS/FFT mul: ............................... KS/FFT sqr: ............................... midmul FFT: .........................
This was ongoing for the 5ish hours I mentioned, before I accidentally aborted the build process. The actual build process itself for zn_poly went relatively quickly. I'll check the log after this attempt finishes. Regards, Thomas On Jul 16, 10:43 pm, mabshoff <[EMAIL PROTECTED]> wrote: > On Jul 16, 8:39 pm, tkeller <[EMAIL PROTECTED]> wrote: > > Hi, > > > The last build I built from source (3.0.3) took ~ 3 hours total on my > > average dell laptop (running kubuntu 8.0.4.1). Building 3.0.5 is > > ongoing, but has spent the last 5+ hours on "zn_poly tuning program." > > Is this normal? It hasn't stalled, but has effectively tripled the > > compilation time (at least). > > This sounds like a build issue to me. zn_poly's build time should be > more or less instant. Even with the check target active (which is > disabled right now) it should only take 10 to 12 minutes on a decent > CPU. Can you save the current tail of install.log and put it up on the > web somewhere. Then hit CTRL-C and restart the build process with > make. If it hangs again/takes very long we need to poke around. > > > Is this normal for other platforms? > > No, this is not normal. > > > Thomas > > Cheers, > > Michael --~--~---------~--~----~------------~-------~--~----~ To post to this group, send email to sage-devel@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/sage-devel URLs: http://www.sagemath.org -~----------~----~----~----~------~----~------~--~---
