It didn't seem to like just changing the effective group and failed almost immediately trying to build gcc. I have started afresh with hpcapps as the effective group and will see how far I can get.
On Thursday, January 8, 2015 at 3:38:28 PM UTC-6, François wrote: > > Nothing to do apart from “make”. > > On 9/01/2015, at 10:21, crook...@gmail.com <javascript:> wrote: > > > > Thank you. I will give it a try. > > > > Pardon my ignorance, but is there anything I have to do to pick up the > "make" where I left off? Or, do I need to start from the beginning? > > > > Cindy > > > > On Thursday, January 8, 2015 at 2:41:12 PM UTC-6, François wrote: > > Not completely sure since the error is about the folder’s group > permission but that’s worth a try. > > I am not sure how the “security” stuff has been implemented, it may be > that the group is outside > > a deemed safe range. > > Hum, this was implemented here: > > > https://github.com/sagemath/sage/blob/master/build/pkgs/python/patches/sys_path_security.patch#L251 > > > I am guessing in your case the group is writable which of course you > want (Fellow HPC admin here). > > A strategy would be to build in personal directory and then install. > > > > François > > > > > On 9/01/2015, at 09:26, crook...@gmail.com wrote: > > > > > > > > > > > > O > > > I am part of the root group. Below is the list of groups that I am > part of: > > > > > > gid=255(hpcadmin) > groups=255(hpcadmin),254(hpc),702(techgrp),23171(hpcapps),23173(hpctrain),42124(hpc-vasp),44679(hpc-reems),47919(hpc-sys),61860(rsmadmins) > > > > > > > > The directories and software that I have mentioned are owned by the > hpcapps group. Do I need to have that be my "effective" group for the sage > python to work? > > > > > > Cindy > > > > > > -- > > > You received this message because you are subscribed to the Google > Groups "sage-devel" group. > > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-devel+...@googlegroups.com. > > > To post to this group, send email to sage-...@googlegroups.com. > > > Visit this group at http://groups.google.com/group/sage-devel. > > > For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > You received this message because you are subscribed to the Google > Groups "sage-devel" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-devel+...@googlegroups.com <javascript:>. > > To post to this group, send email to sage-...@googlegroups.com > <javascript:>. > > Visit this group at http://groups.google.com/group/sage-devel. > > For more options, visit https://groups.google.com/d/optout. > > On Thursday, January 8, 2015 at 3:38:28 PM UTC-6, François wrote: > > Nothing to do apart from “make”. > > On 9/01/2015, at 10:21, crook...@gmail.com <javascript:> wrote: > > > > Thank you. I will give it a try. > > > > Pardon my ignorance, but is there anything I have to do to pick up the > "make" where I left off? Or, do I need to start from the beginning? > > > > Cindy > > > > On Thursday, January 8, 2015 at 2:41:12 PM UTC-6, François wrote: > > Not completely sure since the error is about the folder’s group > permission but that’s worth a try. > > I am not sure how the “security” stuff has been implemented, it may be > that the group is outside > > a deemed safe range. > > Hum, this was implemented here: > > > https://github.com/sagemath/sage/blob/master/build/pkgs/python/patches/sys_path_security.patch#L251 > > > I am guessing in your case the group is writable which of course you > want (Fellow HPC admin here). > > A strategy would be to build in personal directory and then install. > > > > François > > > > > On 9/01/2015, at 09:26, crook...@gmail.com wrote: > > > > > > > > > > > > O > > > I am part of the root group. Below is the list of groups that I am > part of: > > > > > > gid=255(hpcadmin) > groups=255(hpcadmin),254(hpc),702(techgrp),23171(hpcapps),23173(hpctrain),42124(hpc-vasp),44679(hpc-reems),47919(hpc-sys),61860(rsmadmins) > > > > > > > > The directories and software that I have mentioned are owned by the > hpcapps group. Do I need to have that be my "effective" group for the sage > python to work? > > > > > > Cindy > > > > > > -- > > > You received this message because you are subscribed to the Google > Groups "sage-devel" group. > > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-devel+...@googlegroups.com. > > > To post to this group, send email to sage-...@googlegroups.com. > > > Visit this group at http://groups.google.com/group/sage-devel. > > > For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > You received this message because you are subscribed to the Google > Groups "sage-devel" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-devel+...@googlegroups.com <javascript:>. > > To post to this group, send email to sage-...@googlegroups.com > <javascript:>. > > Visit this group at http://groups.google.com/group/sage-devel. > > For more options, visit https://groups.google.com/d/optout. > > On Thursday, January 8, 2015 at 3:38:28 PM UTC-6, François wrote: > > Nothing to do apart from “make”. > > On 9/01/2015, at 10:21, crook...@gmail.com <javascript:> wrote: > > > > Thank you. I will give it a try. > > > > Pardon my ignorance, but is there anything I have to do to pick up the > "make" where I left off? Or, do I need to start from the beginning? > > > > Cindy > > > > On Thursday, January 8, 2015 at 2:41:12 PM UTC-6, François wrote: > > Not completely sure since the error is about the folder’s group > permission but that’s worth a try. > > I am not sure how the “security” stuff has been implemented, it may be > that the group is outside > > a deemed safe range. > > Hum, this was implemented here: > > > https://github.com/sagemath/sage/blob/master/build/pkgs/python/patches/sys_path_security.patch#L251 > > > I am guessing in your case the group is writable which of course you > want (Fellow HPC admin here). > > A strategy would be to build in personal directory and then install. > > > > François > > > > > On 9/01/2015, at 09:26, crook...@gmail.com wrote: > > > > > > > > > > > > O > > > I am part of the root group. Below is the list of groups that I am > part of: > > > > > > gid=255(hpcadmin) > groups=255(hpcadmin),254(hpc),702(techgrp),23171(hpcapps),23173(hpctrain),42124(hpc-vasp),44679(hpc-reems),47919(hpc-sys),61860(rsmadmins) > > > > > > > > The directories and software that I have mentioned are owned by the > hpcapps group. Do I need to have that be my "effective" group for the sage > python to work? > > > > > > Cindy > > > > > > -- > > > You received this message because you are subscribed to the Google > Groups "sage-devel" group. > > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-devel+...@googlegroups.com. > > > To post to this group, send email to sage-...@googlegroups.com. > > > Visit this group at http://groups.google.com/group/sage-devel. > > > For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > You received this message because you are subscribed to the Google > Groups "sage-devel" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-devel+...@googlegroups.com <javascript:>. > > To post to this group, send email to sage-...@googlegroups.com > <javascript:>. > > Visit this group at http://groups.google.com/group/sage-devel. > > For more options, visit https://groups.google.com/d/optout. > > -- You received this message because you are subscribed to the Google Groups "sage-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to sage-devel+unsubscr...@googlegroups.com. To post to this group, send email to sage-devel@googlegroups.com. Visit this group at http://groups.google.com/group/sage-devel. For more options, visit https://groups.google.com/d/optout.