No, I have enough free space on disk
sapristi:sage dcoudert$ df -h .
Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/disk1s2 932Gi 475Gi 422Gi 53% 3172816 4424250640 0%
/System/Volumes/Data
May be it is due to F-Secure ? I’m forced to used this software and I’m not
able to switch it off, even temporarily :(
David.
> Le 15 juin 2022 à 09:20, Dima Pasechnik <dimp...@gmail.com> a écrit :
>
> errors such as
> [maxima-5.45.0.p0] ;;; Loading
> "/Users/dcoudert/sage/local/var/tmp/sage/build/maxima-5.45.0.p0/src/src/../lisp-utils/defsys
> tem.lisp"
> [maxima-5.45.0.p0] ;;; Loading
> #P"/usr/local/Cellar/ecl/21.2.1_2/lib/ecl-21.2.1/cmp.fas"
> [maxima-5.45.0.p0]
> #P"/Users/dcoudert/sage/local/var/tmp/sage/build/maxima-5.45.0.p0/src/lisp-utils/defsystem.lisp"
> [maxima-5.45.0.p0] >
> [maxima-5.45.0.p0] ("../src/" "./" (MAKE::HOME-SUBDIRECTORY "lisp/systems/")
> [maxima-5.45.0.p0] "/usr/local/lisp/Registry/")
> [maxima-5.45.0.p0] >
> [maxima-5.45.0.p0] ;;; Loading
> "/Users/dcoudert/sage/local/var/tmp/sage/build/maxima-5.45.0.p0/src/src/maxima.system"
> [maxima-5.45.0.p0]
> [maxima-5.45.0.p0] ; - Compiling defsystem "maxima"
> [maxima-5.45.0.p0] ; - Compiling module "package"
> [maxima-5.45.0.p0] ; - Compiling source file
> [maxima-5.45.0.p0] ;
> "/Users/dcoudert/sage/local/var/tmp/sage/build/maxima-5.45.0.p0/src/src/maxima-package.lisp"
> [maxima-5.45.0.p0] ;;;
> [maxima-5.45.0.p0] ;;; Compiling
> /Users/dcoudert/sage/local/var/tmp/sage/build/maxima-5.45.0.p0/src/src/maxima-package.lisp
> .
> [maxima-5.45.0.p0] ;;; OPTIMIZE levels: Safety=2, Space=0, Speed=3, Debug=2
> [maxima-5.45.0.p0] ;;;
> [maxima-5.45.0.p0] ;;; End of Pass 1.
> [maxima-5.45.0.p0] ;;; Internal error:
> [maxima-5.45.0.p0] ;;; ** Detected access to an invalid or protected
> memory address.
> [maxima-5.45.0.p0] ; - Binary file binary-ecl/maxima-package.fas
> is old or does not exist.
> [maxima-5.45.0.p0] ; Compile (and load) source file
> /Users/dcoudert/sage/local/var/tmp/sage/build/maxima-5.45.0.p0/src/src/maxima-package.lisp
> instead? y
> [maxima-5.45.0.p0] ; - Should I bother you if this happens again? y
> [maxima-5.45.0.p0] ; - Compiling source file
> [maxima-5.45.0.p0] ;
> "/Users/dcoudert/sage/local/var/tmp/sage/build/maxima-5.45.0.p0/src/src/maxima-package.lisp"
> [maxima-5.45.0.p0] ;;;
> [maxima-5.45.0.p0] ;;; Compiling
> /Users/dcoudert/sage/local/var/tmp/sage/build/maxima-5.45.0.p0/src/src/maxima-package.lisp.
> [maxima-5.45.0.p0] ;;; Internal error:
> [maxima-5.45.0.p0] ;;; ** Internal error: stream #<output stream
> #P"binary-ecl/maxima-package.c" 0x10f70c140> has no valid C file
> handler.
> [maxima-5.45.0.p0] ; - Loading binary file "binary-ecl/maxima-package.fas"
> [maxima-5.45.0.p0] Condition of type: FILE-ERROR
> [maxima-5.45.0.p0] Filesystem error with pathname
> #P"/Users/dcoudert/sage/local/var/tmp/sage/build/maxima-5.45.0.p0/src/src/binary-ecl/maxima-package.fas".
>
>
>
> Are you out of disk space?
>
>
> On Wed, Jun 15, 2022 at 7:40 AM David Coudert <david.coud...@gmail.com
> <mailto:david.coud...@gmail.com>> wrote:
>>
>> After « make distclean », starting a fresh shell, "./bootstrap", "source
>> .homebrew-build-env », "./configure » and « make build », I now have an
>> error at the end of the compilation of maxima.
>>
>> [maxima-5.45.0.p0] Now installing the Maxima library as
>> '/Users/dcoudert/sage/local/lib/ecl/maxima.fas'...
>> [maxima-5.45.0.p0] cp: src/binary-ecl/maxima.fas: No such file or directory
>> [maxima-5.45.0.p0]
>> ********************************************************************************
>> [maxima-5.45.0.p0] Failed to install 'src/binary-ecl/maxima.fas' as
>> [maxima-5.45.0.p0] '/Users/dcoudert/sage/local/lib/ecl/maxima.fas'.
>>
>> Log file attached.
>>
>> Best,
>> David.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "sage-release" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to sage-release+unsubscr...@googlegroups.com
>> <mailto:sage-release+unsubscr...@googlegroups.com>.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/sage-release/AB87A44E-531C-4645-AA12-8ADB83F3DBEE%40gmail.com
>>
>> <https://groups.google.com/d/msgid/sage-release/AB87A44E-531C-4645-AA12-8ADB83F3DBEE%40gmail.com>.
>>
>>
>> Le 14 juin 2022 à 11:15, Dima Pasechnik <dimp...@gmail.com> a écrit :
>>
>> On Tue, Jun 14, 2022 at 10:06 AM Dima Pasechnik <dimp...@gmail.com> wrote:
>>
>>
>> On Tue, Jun 14, 2022 at 9:57 AM David Coudert <david.coud...@gmail.com>
>> wrote:
>>
>>
>> I have issues compiling this release. I have openblas 0.3.20 installed with
>> homebrew, but sage searches for 0.3.19.
>>
>>
>> looks like you have a stale ./configure, otherwise I can't explain this.
>> Run
>>
>> ./bootstrap
>>
>> (making sure it succeeds)
>>
>>
>> In fact, the up to date ./configure will not even check that the
>> version is less than 0.3.20.
>> So I don't know what's happening, perhaps some mixup in your Homebrew, or
>> in the result of "source .homebrew-build-env"
>> It could be that the latter was not run since Homebrew update, and
>> still points (in, say, LIBRARY_PATH, or in PKG_CONFIG_PATH) at a no
>> longer existing on the system 0.3.19
>>
>> Closing the shell, opening a fresh one, and
>> doing
>>
>> source .homebrew-build-env
>>
>> should fix this issue.
>>
>>
>>
>> laptop: Macbook air (Intel) with macOS 12.3.1
>>
>> sapristi:sage dcoudert$ gcc --version
>> Configured with: --prefix=/Library/Developer/CommandLineTools/usr
>> --with-gxx-include-dir=/Library/Developer/CommandLineTools/SDKs/MacOSX12.3.sdk/usr/include/c++/4.2.1
>> Apple clang version 13.0.0 (clang-1300.0.27.3)
>> Target: x86_64-apple-darwin21.4.0
>> Thread model: posix
>> InstalledDir: /Library/Developer/CommandLineTools/usr/bin
>>
>> log file attached. Let me know if you need more data.
>>
>> Thank you in advance for your help.
>>
>> Best,
>> David.
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "sage-release" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to sage-release+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/sage-release/EA0693C7-7391-4E07-8F58-982A7D415083%40gmail.com.
>>
>> Le 12 juin 2022 à 19:38, Matthias Köppe <matthiaskoe...@gmail.com> a écrit :
>>
>> On Sunday, June 12, 2022 at 6:16:00 AM UTC-7 Volker Braun wrote:
>>
>>
>> a6e696e91d (tag: 9.7.beta2, trac/develop) Updated SageMath version to
>> 9.7.beta2
>>
>>
>> [...]
>>
>>
>> fa1477350a Trac #32937: Drop Python 3.7 support in Sage 9.7
>>
>>
>>
>> Python 3.8 language and library features can now be used in the Sage library
>> See https://trac.sagemath.org/ticket/29756 (Meta-ticket: Review of Python 3
>> features)
>> := Goo goo g'joob
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "sage-release" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to sage-release+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/sage-release/4251cff7-e641-44f3-9a41-23a56bc5f081n%40googlegroups.com.
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "sage-release" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to sage-release+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/sage-release/EA0693C7-7391-4E07-8F58-982A7D415083%40gmail.com.
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "sage-release" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to sage-release+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/sage-release/CAAWYfq1omEA%2BZSb80XNoZmccsp_ikAZENskEefvZQggTtZZqQg%40mail.gmail.com.
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "sage-release" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to sage-release+unsubscr...@googlegroups.com
>> <mailto:sage-release+unsubscr...@googlegroups.com>.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/sage-release/AB87A44E-531C-4645-AA12-8ADB83F3DBEE%40gmail.com
>>
>> <https://groups.google.com/d/msgid/sage-release/AB87A44E-531C-4645-AA12-8ADB83F3DBEE%40gmail.com>.
>
> --
> You received this message because you are subscribed to the Google Groups
> "sage-release" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to sage-release+unsubscr...@googlegroups.com
> <mailto:sage-release+unsubscr...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/sage-release/CAAWYfq1T665JHP4iDB%2BwmXeTu-E_ZSiWRV7A1eXpQG7f_OJ_rg%40mail.gmail.com
>
> <https://groups.google.com/d/msgid/sage-release/CAAWYfq1T665JHP4iDB%2BwmXeTu-E_ZSiWRV7A1eXpQG7f_OJ_rg%40mail.gmail.com>.
--
You received this message because you are subscribed to the Google Groups
"sage-release" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to sage-release+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/sage-release/81AFD614-D00D-41AB-949A-9ECE784DBC8D%40gmail.com.
