The way we're working in v6.1 is that the IM alerts will each of them be within a dll (sometimes 2) and the threading/queueing of it too. That way the updates should be easy.
BUT if at some point we add a feature to the IM alert itself, then it won't be a simple dll update anymore. Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Michael Shook Sent: Tuesday, February 13, 2007 11:21 PM To: Servers Alive Discussion List Subject: RE: [SA-list] AIM alerts not being sent? Just as a thought... Since the IM part of SA seems to be continually under seige as the protocols shift, would it make sense for that part of SA to be "externalized" to a .dll or somesuch so that upgrading that piece of it doesn't mean an upgrade to SA in it's whole. I envision a separate .dll for each flavor. The reason I suggest this is that it is policy in my company that ANY upgrade be extensivly tested before it can be rolled into production, and NO beta software be used. I suspect this policy is not so unusual. Upgrading a .dll would then require quite a bit less testing than a whole new version of SA and would be easier to implement when changes inevitably occur. Also, it wouldn't be packaged as beta, so it could be implemented. Michael D. Shook Systems Analyst - Data Integration Saddle Creek Corporation [EMAIL PROTECTED] 863 668 4477 (work) 863 665 1261 (fax) www.saddlecrk.com -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Tuesday, February 13, 2007 5:06 PM To: Servers Alive Discussion List Subject: RE: [SA-list] AIM alerts not being sent? Due to changes in the AIM protocol and changes on the AIM server we do know that the AIM sending in "older" versions (even in the released v6) isn't always working. In the current beta builds AIM seems to work fine again. Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Leone, Michael Sent: Tuesday, February 13, 2007 10:16 PM To: Servers Alive Discussion List Subject: [SA-list] AIM alerts not being sent? Here's a weird one ... I set up a new AIm username, for my SA to send me AIM messages at home. I have verified that the AIM username and password works (if I run the AIM program on the SA server, I can log in and send messages through it to others). However, when I run the test in SA, no test message is sent. I (being the recipient, and logged into my own AIM) see the SA username log on, then immediately log off. I see no test message sent to me at all. And I see nothing in the logs, to indicate any problems. And when the test fails, I get nothing - no message, no indication of log on/log off. SA 5.1.1964 Enterprise Default messages: "%s - %c - %d" Where to troubleshoot next? -- ------------------------------------------------------------ Michael Leone, Systems Administrator Philadelphia Contributionship 210 S. 4th Street, Philadelphia, PA 19106 <mailto:[EMAIL PROTECTED]> V: 215-627-1752 x1282 F: 215-627-5354 To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. -------------------------------------- The information contained in this message is intended only for the use of the addressee. If the reader of this message is not the intended recipient or agent of the intended recipient, you are hereby notified that any dissemination, distribution, or copying of the message is strictly prohibited. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
