Let me just update this some more.
My install of SA takes 10 minutes to complete a check cycle and then waits 2 mins before starting again, while a check cycle is running, the interface is pretty much non responsive anyway, but changes made are not immediately reflected. Because of this I usually stop SA from checking while I’m updating (because I run checks 2 mins after the last set finishes) so if I want to see my updates in the interface I realistically only have 2 mins to make any changes if I want to see these updated properly. What I need back is the ability to have the interface updating as it used to if the checking has been stopped, not just in between checks. From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davis Sent: 05 September 2007 17:01 To: Servers Alive Discussion List Subject: RE: [SA-list] Interface not updating No, it doesn’t update until the end of a check cycle. If SA is stopped it doesn’t update at all. When my complete check cycle takes over 10 minutes to run and I want to test some new entries this is no help at all. I want to be able to add and fine tune new entries on the fly and frequently stop SA while I’m doing this and then restart it at the end. The biggest problem is that the Check Entry Now function is completely useless with no immediate interface update. If I change the name of a check, even this is not being reflected, nor is changing dependencies moving the item to it’s new location. This to me is a crazy removal of functionality and should at least have the option of being enabled if needed. I can’t believe I’m the only one who uses it this way. How does everyone else manage adding, modifying and testing new checks? I’ve just added 3 new checks, which were a copy and slight change of 1 existing check and this would normally have taken a couple of minutes to create and test and has now taken over 30 minutes. Steve From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: 05 September 2007 16:36 To: Servers Alive Discussion List Subject: RE: [SA-list] Interface not updating The interface does not update while in a check cycle. Outside of a checkcycle it does update. You don't have to re-load SA Dirk Bulinckx. From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davis Sent: Wednesday, September 05, 2007 5:31 PM To: Servers Alive Discussion List Subject: RE: [SA-list] Interface not updating Why is it disabled? How am I supposed to add new entries and check them when I can’t see the results until I exit and reload SA and the Check Entry Now function gives no feedback in the interface at all. I need this functionality back please at least make it a toggle. From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: 05 September 2007 16:26 To: Servers Alive Discussion List Subject: RE: [SA-list] Interface not updating Yes that is what you're seeing. It's disable and will stay like that Dirk Bulinckx. From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davis Sent: Wednesday, September 05, 2007 4:51 PM To: Servers Alive Discussion List Subject: [SA-list] Interface not updating I’ve got a really strange problem with 6.1.2151 & now 6.1.2162 The app normally runs as a service and we update and add checks by clicking in the icon in the system tray. Just now I tried adding a new check which was a copy of an existing one and although all the entries for that check are correct, the interface has not updated it with it’s new title. Also, when trying to do a Check Now, nothing happens in the interface at all. I tried restarting all the checks and while I can see them being updated in the status bar, it’s not marking each item any more. I tried installing the latest built and see the same thing. The service is not running, just an app now. Looking at the change list I see that b2151 no longer updates the interface by default, is this what I’m seeing? If so how do I enable it? Steve To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. ______________________________________________________________________ This inbound email has been scanned by the MessageLabs Email Security System on behalf of Electronic Media Ltd. ______________________________________________________________________ To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. ______________________________________________________________________ This inbound email has been scanned by the MessageLabs Email Security System on behalf of Electronic Media Ltd. ______________________________________________________________________ To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. ______________________________________________________________________ This inbound email has been scanned by the MessageLabs Email Security System on behalf of Electronic Media Ltd. ______________________________________________________________________ To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.