The nt process check uses Netbios. That uses TCP/UDP 135-137. Most firewall admins will refuse to open that on the firewall.
dirk From: Servers Alive Discussion List [mailto:sal...@woodstone.nu] On Behalf Of Bill Tkach Sent: Wednesday, December 23, 2009 12:10 AM To: Servers Alive Discussion List Subject: [SA-list] NT Process OK, what ports do I need open in order to check NT Process(es) on a remote computer? I know the answers going to be obvious, once you tell me… Bill Tkach IT/GIS Technician 1116 Herring Gull Way Parksville, BC V9P 1R2 250-248-6144 Direct Line: 250-951-2478 | Fax 250-248-6140 btk...@parksville.ca (mailto:btk...@parksville.ca) | www.parksville.ca (http://www.parksville.ca/) ü Please consider the environment before printing this email. The information contained in this email message, including any attached documents, is confidential and may be privileged. It is intended for the sole use of the recipient to whom it is addressed. If you are not the intended recipient, any review, use, copying, distribution or disclosure is strictly prohibited. If you have received this message in error, please immediately notify the sender, and delete and destroy all copies of this email message. Thank you. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
