Goodmorning Ken,
If you follow the steps as directed in the pdf you can check the directory with every step to see if the scripts are generated. Please check if you put the \ (backslash) there where needed. If there is a \ in the document please put it also in your entry. As Dirk also said, enable RRD logging for yourv entries (page 2) To use the RRD graphics you have to enable RRDTool logging in the setup and assign the logging to every entry you want. You can modify entries you want to use RRDLogging for to one by one or just via the CHANGES WIZARD set: RRD Roundtrip logging to TRUE for all entries RRD Check Result logging to TRUE for all entries RRD Up/Down logging to TRUE for all entries This way all databases are created and updated for all entries. And don’t forget about the last line on 11 (If you add/remove checks you have to repeat the steps on pages 6 through 9 ). Lau From: Servers Alive Discussion List [mailto:salive@woodstone.nu] On Behalf Of Dirk Bulinckx Sent: vrijdag 21 september 2012 1:18 To: Servers Alive Discussion List Subject: RE: [SA-list] RRD Logging : database creation script not correctly generated Did you enable the RRD logging for some of the entries? Dirk Bulinckx Servers Alive - http://www.woodstone.nu (http://www.woodstone.nu/) StellarDNS (DNS Hosting) - http://www.stellardns.com (http://www.stellardns.com/) -------------------------------------------------------------------------------- From: Servers Alive Discussion List [mailto:salive@woodstone.nu] (mailto:[mailto:salive@woodstone.nu]) On Behalf Of Ken Applebaum Sent: Thursday, September 20, 2012 5:31 PM To: Servers Alive Discussion List Subject: RE: [SA-list] RRD Logging : database creation script not correctly generated Hi Dirk, I upgraded to the beta version (v7.0.2546). I still have the same issues: In c:\rrdtool\RRD-data\ there are no files in the checkresult, roundtrip and updown subdirectories. In c:\inetpub\wwwroot\SA\ subdirectories, there are no files. Therefore there are no graphs on the webpage, nor is data being kept in .db files. Should I delete SA folder under c:\inetpub\wwwroot, as well as the c:\rrdtool folder and start over, or are there other steps that I can take to fix the RRDtool/SA implementation I am working on? V1.50 - Report Dated: Thursday, September 20, 2012, 11:24:04 AM This report based on Servers Alive version: 7.0.2546, running on computer:NAZ-AS-09. Monitoring started at 9/20/2012, 8:25:36 AM. Number of cycles monitored: 88. This cycle started at: 9/20/2012 11:24:02 AM Thanks, _________________________________________ Ken Applebaum Enterprise Network and Solutions Engineer Nazareth College 4245 East Avenue Rochester, NY 14618 Office: 585-389-2104 Cell: 585-748-1115 From: Servers Alive Discussion List [mailto:salive@woodstone.nu] (mailto:[mailto:salive@woodstone.nu]) On Behalf Of Dirk Bulinckx Sent: Wednesday, September 19, 2012 2:17 PM To: Servers Alive Discussion List Subject: RE: [SA-list] RRD Logging : database creation script not correctly generated If you upgrade an 7.x install to the latest 7.x beta, it will upgrade using the existing "stuff". No need to delete anything Dirk Bulinckx Servers Alive - http://www.woodstone.nu (http://www.woodstone.nu/) StellarDNS (DNS Hosting) - http://www.stellardns.com (http://www.stellardns.com/) -------------------------------------------------------------------------------- From: Servers Alive Discussion List [mailto:salive@woodstone.nu (mailto:salive@woodstone.nu)] On Behalf Of Ken Applebaum Sent: Wednesday, September 19, 2012 7:32 PM To: Servers Alive Discussion List Subject: RE: [SA-list] RRD Logging : database creation script not correctly generated Thanks Dirk, Two questions. Will the installation package upgrade my current Servers Alive, or do I need to uninstall the current version first? Will there be any need to delete the files/directory structure of the c:\rrdtool\ and c:\inetpub\wwwroot\SA\ directories after the program is upgraded? Thanks, _________________________________________ Ken Applebaum Enterprise Network and Solutions Engineer Nazareth College 4245 East Avenue Rochester, NY 14618 Office: 585-389-2104 Cell: 585-748-1115 From: Servers Alive Discussion List [mailto:salive@woodstone.nu (mailto:salive@woodstone.nu)] On Behalf Of Dirk Bulinckx Sent: Wednesday, September 19, 2012 1:01 PM To: Servers Alive Discussion List Subject: RE: [SA-list] RRD Logging : database creation script not correctly generated Correct you will need to upgrade to a beta Dirk Bulinckx Servers Alive - http://www.woodstone.nu (http://www.woodstone.nu/) StellarDNS (DNS Hosting) - http://www.stellardns.com (http://www.stellardns.com/) -------------------------------------------------------------------------------- From: Servers Alive Discussion List [mailto:salive@woodstone.nu (mailto:salive@woodstone.nu)] On Behalf Of Ken Applebaum Sent: Wednesday, September 19, 2012 6:16 PM To: Servers Alive Discussion List Subject: RE: [SA-list] RRD Logging : database creation script not correctly generated Hi, I also have set up RRD tools as per the documentation, and have enabled output to the default page, and logging for all entries. However, the .db files were not created in each of the subdirectories under c:\rrdtool\rrd-data, and the .png files were not created in the appropriate subdirectories in c:\inetpub\wwwroot\SA\. I do have the ServersAlive webpage with the status of each of the servers I am monitoring, but no graphs, just the current state of the servers. Version info from the header of the page is: V1.50 - Report Dated: Wednesday, September 19, 2012, 12:01:44 PM This report based on Servers Alive version: 7.0.2505, running on computer:NAZ-AS-09. Monitoring started at 9/19/2012, 9:31:52 AM. Number of cycles monitored: 18. This cycle started at: 9/19/2012 12:01:42 PM I am running the Enterprise version of SA, having purchased the license. If I understand this email thread correctly, I need to upgrade to the beta version (7.0.2546) of SA in order for the logging via RRD tools to work correctly? Thanks, _________________________________________ Ken Applebaum Enterprise Network and Solutions Engineer Nazareth College 4245 East Avenue Rochester, NY 14618 Office: 585-389-2104 Cell: 585-748-1115 From: Servers Alive Discussion List [mailto:salive@woodstone.nu (mailto:salive@woodstone.nu)] On Behalf Of Dirk Bulinckx Sent: Thursday, September 13, 2012 10:01 AM To: Servers Alive Discussion List Subject: RE: [SA-list] RRD Logging : database creation script not correctly generated Lau's document assumes a more recent (beta) version, so update to the version on http://beta.woodstone.nu (http://beta.woodstone.nu) Also did you enable RRD for some of your entries? (logging tab of each entry) Dirk Bulinckx Servers Alive - http://www.woodstone.nu (http://www.woodstone.nu/) StellarDNS (DNS Hosting) - http://www.stellardns.com (http://www.stellardns.com/) -------------------------------------------------------------------------------- From: Servers Alive Discussion List [mailto:salive@woodstone.nu (mailto:salive@woodstone.nu)] On Behalf Of Stéphane BORGNE Sent: Thursday, September 13, 2012 3:46 PM To: Servers Alive Discussion List Subject: [SA-list] RRD Logging : database creation script not correctly generated Hello, I’m testing RRD Logging in Servers Alive v 7.0.2505 (enterprise license). .bat script generated with setup dialog boxes contains only lines to create directories, and no rrdtool.exe command line: REM ********************************************************************************************* REM Script generated by Servers Alive on 13-sept-2012 at 15:28:41 REM ********************************************************************************************* md "C:\Exploitation\supervision\rrd\data\roundtrip\" REM ********************************************************************************************* REM Script generated by Servers Alive on 13-sept-2012 at 15:29:52 REM ********************************************************************************************* md "C:\Exploitation\supervision\rrd\data\checkresult\" REM ********************************************************************************************* REM Script generated by Servers Alive on 13-sept-2012 at 15:31:13 REM ********************************************************************************************* md "C:\Exploitation\supervision\rrd\data\updown\" I followed Lau Daniëls’ document found on www.woodstone.nu (http://www.woodstone.nu). Is there a bug or do I done things incorrectly? Best regards, -- Stéphane Borgne Conseil général de la Savoie Unité Fourniture et Exploitation des Services Direction des Systèmes d’Information Hôtel du Département 73018 Chambéry Cedex Tél. 04.79.96.74.85 FRANCE To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu (mailto:salive@woodstone.nu) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu (mailto:salive@woodstone.nu) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu (mailto:salive@woodstone.nu) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu (mailto:salive@woodstone.nu) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu (mailto:salive@woodstone.nu) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu (mailto:salive@woodstone.nu) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu (mailto:salive@woodstone.nu) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu (mailto:salive@woodstone.nu) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. -------------------------------------------------------------------------------- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender. Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. This footnote also confirms that this email message has been swept by MIMEsweeper for the presence of computer viruses but we cannot accept responsibility for any loss or damage arising from the use of this email and/or attachment(s). To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
