-----Original Message-----
From: Gareth Davies [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 09, 2002 4:52 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: [Samba] Please assist with Winbind issues!
Have you tried:
Manually putting password server = IP adress rather than *.
>>>Winbind fails to find the domain if I do this.
[homes]
comment = Home Directories
browseable = no
writable = yes
valid users =%D+%S
The chmod for home directory should be 700, chown to the user and chown
group to 'DOMAIN+Domain Users'
>>>chown doesn't find the domain users or groups.
If you can use getent passwd and getent groups I presume it's just a
permissions thing.
I haven't been able to get pam_mkhomedir.so to work so I just manually
create the accounts.
>>>I don't see pam_mkhomedir working, but I don't think it's getting that far... I've
>created home directories for the test accounts, but that doesn't work either.
I'm just writing a guide on how to do it now on Debian 3.0.
Good luck,
Shaolin - IT Systems
WB Ltd.
.: http://www.security-forums.com :.
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 08, 2002 10:29 PM
Subject: [Samba] Please assist with Winbind issues!
> Hello,
>
> I've been trying for a couple of weeks now to get Samba to authenticate
via Winbind to an NT domain. I've scoured Google and the mailing lists to
no avail. I've tried various configurations that I've found during my
searches, but none of them have worked for me.
>
> I need to be able to authenticate users, that do not have an account on
the Linux box, against the NT domain, and automatically create a home
directory for them. This is the purpose of Winbind (except the home
directory part, which pam_mkhomedir is supposed to do), as I understand it.
Something between winbind and pam is failing since the connecting user gets
authenticated as guest rather than an actual user.
>
> My current configuration is RedHat 7.3 and Samba 2.2.5. My most current
samba installation is an RPM generated via the makerpms.sh script in the
packaging/RedHat folder of the 2.2.5 samba distribution.
>
> I've added the following compilation flags in the samba2.spec file: This
is my latest attempt, since nothing else seemed to work.
>
> --with-ssl \
> --with-sslinc=/usr/include/openssl \
> --with-ssllib=/usr/lib/ssl \
> --with-acl-support \
> --with-winbind \
> --with-winbind-auth-challenge \
>
> 'getent passwd' and 'getent group' work properly so I think winbind works,
too. I think the problem lies somewhere with pam, but I'm not a pam guru by
any stretch of the imagination.
>
> The problem is one I've seen discussed a couple of times, but have not
seen any kind of resolution. The next few lines are from the log file of
the client attempting to connect to the server with an account called
ilchtest.
>
> [2002/10/08 15:00:50, 3] lib/util_sock.c:open_socket_out(845)
> Connecting to 10.226.XXX.XXX at port 139
> [2002/10/08 15:00:50, 3] smbd/reply.c:reply_sesssetup_and_X(1045)
> No such user ilchtest [CHICAGO] - using guest account
>
>
>
> The following is the last line of what 'winbindd -d5 -i' spits out when I
start it from the root prompt:
>
> tdb(unknown): tdb_brlock failed (fd=10) at offset 4 rw_type=1 lck_type=13
<--------Not sure if this points to a problem???
>
>
>
>
> The following is what 'winbindd -d5 -i' spits out when the client trys to
connect:
>
> rpc_read: num_read = 4, read offset: 0, to read: 4
> 000018 samr_io_r_close_hnd
> 0018 data1: 00000000
> 001c data2: 00000000
> 0020 data3: 0000
> 0022 data4: 0000
> 0024 data5: 00 00 00 00 00 00 00 00
> 002c status: NT_STATUS_OK
> [23826]: sid to gid S-1-5-21-178404139-331375567-1660491571-2273
> [23826]: gid to sid 10000
> [23826]: gid to sid 10001
> [23826]: getgroups ftp <-------Guest account was nobody and I changed
it to ftp.
>
>
>
> Here is my /etc/nsswitch.conf
>
> passwd: files winbind
> shadow: files
> group: files winbind
>
> #hosts: db files nisplus nis dns
> hosts: files winbind dns
>
>
>
>
>
> Here is my /etc/pam.d/system-auth
>
> auth required /lib/security/pam_env.so
> auth sufficient /lib/security/pam_winbind.so
> auth sufficient /lib/security/pam_unix.so likeauth nullok
use_first_pa
> ss
> auth required /lib/security/pam_deny.so
>
> account sufficient /lib/secutiry/pam_winbind.so
> account required /lib/security/pam_unix.so
>
> password required /lib/security/pam_cracklib.so retry=3
> password sufficient /lib/security/pam_unix.so nullok use_authtok md5
shado
> w
> password required /lib/security/pam_deny.so
>
> session required /lib/security/pam_mkhomedir.so skel=/etc/skel/
umask=0
> 022
> session required /lib/security/pam_limits.so
> session required /lib/security/pam_unix.so
>
> Here is my /etc/samba/smb.conf:
>
> [global]
> workgroup = CHICAGO
> netbios name = SILCHRS03
> server string =
> security = DOMAIN
> encrypt passwords = Yes
> password server = *
> log level = 3
> log file = /var/log/samba/log.%m
> max log size = 50
> large readwrite = Yes
> name resolve order = host wins bcast
> socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
> load printers = No
> preferred master = False
> local master = No
> domain master = False
> dns proxy = No
> wins server = 172.30.XXX.XXX
> winbind uid = 10000-50000
> winbind gid = 10000-50000
> template shell = /bin/bash
> guest account = ftp
> invalid users = root bin daemon adm sync shutdown halt mail news uucp
operator gopher
> printer admin = +PrinterAdmins
> nt acl support = No
> printing = cups
>
> [homes]
> comment = Home Directories
> read only = No
> browseable = No
>
> [printers]
> comment = All Printers
> path = /var/spool/samba
> printable = Yes
> browseable = No
>
>
> I really want this to work, so any help is appreciated.
> Please include my e-mail address in any replies.
>
> Thank you!
>
>
> Sven
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba