On Mon, Oct 20, 2008 at 08:54:11PM +0200, Peter Rindfuss wrote: > Jeremy Allison wrote: > > On Mon, Oct 20, 2008 at 04:09:57PM +0200, Peter Rindfuss wrote: > >> On 2008-10-20 15:17, Volker Lendecke wrote: > >>> On Mon, Oct 20, 2008 at 03:11:41PM +0200, Peter Rindfuss wrote: > >>>> On 2008-10-20 15:02, Volker Lendecke wrote: > >>>>> On Mon, Oct 20, 2008 at 02:34:23PM +0200, Peter Rindfuss wrote: > >>>>>> attached is the subroutine that I used for testing. > >>>>>> The part enclosed in #ifdef createdir_alt worked with 3.0.24, but > >>>>>> not with 3.2.4. The #else part works with 3.2.4. Both versions > >>>>>> are based upon the same security descriptor structure. > >>>>> Can you also send your smb.conf and a debug level 10 log > >>>>> leading to this error? > >>>>> > >>>> smb.conf is attached. > >>>> > >>>> Is it possible to turn on level 10 logging without restarting the > >>>> daemon? It is our production server and I'm not willing to disturb > >>>> any existing connection. > >>> Sure. Just set "debug level = 10". Then all new connections > >>> will get the higher debuglevel. Alternatively, connect from > >>> your client, look at smbstatus output to find "your" smbd > >>> pid and issue > >>> > >>> smbcontrol <smbd-pid> debug 10 > >>> > >>> to make just that one smbd use that debuglevel. > >>> > >>> Volker > >> Here comes the log; I went to the CreateDirectory call in the debugger, > >> turned level 10 on and stepped over the call. > >> > >> Second try; gzipped now. > > > > No log attached to this message I'm afraid. Can you > > try again please ?
Still nothing attached to this message. Try a different mailer ? -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba