Good morning and thanks all for answer. This is a Windows driver only compatibility device. But I can print following a Github project. Just I am reading on SANE about network SCSI interface (or USB ricoh2) instead of ethernet/lan does it make same thing? http://www.sane-project.org/man/sane-ricoh.5.html ricoh http://www.sane-project.org/man/sane-ricoh2.5.html ricoh2 (404 error page not found) Do u perhaps have some code (readme howto) on gitlab (it is different from github)? Has drivers to be developed/debugged meaning compiled? Sorry but SANE has no detailed information for special devices and all documentation show about scsi or usb. Actually I connected it with usb cable (0x05ca/0x043f) but simple-scan still does not detect scanner Thanks in advance
Gianni Cerato giannicerato.com Il giorno dom, 01/03/2020 alle 23.15 +0100, Thierry HUCAHRD ha scritto: > Le 2020-03-01 21:06, Stanislav a écrit : > > There's definitely some chance this scanner is supported by ricoh2. > > Last year we found three more models are supported by this backend, > > so > > SP204 might also be compatible. > Hi > It may be compatible with the ricoh2 backend. > It is not referenced as being supported by eSCL/Airscan. > The documentation says it is Microsoft compatible. There is a > possibility that it is WSD compatible. > > /Stanislav > > > > 29.02.2020, 14:19, "Olaf Meeuwissen" <[email protected]>: > > > > > Hi, > > > > > > Gianni Cerato writes: > > > > > > > Good morning may u know if perhaps there is a way to connect > > > > simple- > > > > scan in Debian with above (mentioned in object) all-in-one > > > > Ricoh? > > > > Thanks in advance > > > > > > This scanner is not known to work with sane-backends-1.0.29. > > > However, > > > for scans via a network connection, it might work via the escl > > > backend. > > > Alternatively, you could use the separately maintained airscan > > > backend, > > > available at > > > > > > https://github.com/alexpevzner/sane-airscan > > > > > > Note that both backends assume the device uses the eSCL (aka > > > AirScan > > > or > > > AirPrint scanning) protocol. > > > > > > @yu-stas Is there any chance this device might (be made to) work > > > with > > > the ricoh2 backend? > > > > > > Hope this helps, > > > -- > > > Olaf Meeuwissen, LPIC-2 FSF Associate Member since 2004-01-27 > > > GnuPG key: F84A2DD9/B3C0 2F47 EA19 64F4 9F13 F43E B8A4 A88A F84A > > > 2DD9 > > > Support Free Software https://my.fsf.org/donate > > > Join the Free Software Foundation https://my.fsf.org/join
