On 12-Feb-2002 Karl Heinz Kremer wrote: > > To answer your question about the scanner capabilities: You can use 48bit > color, > the backend however calls this 16bit (this is per color channel, so with RGB > you end up with 3*16 bits). I don't have a 1650, but from the command set and > the debug output I've seen, you should also be able to select up to 3200dpi - > not that this would give you better scans, but you should be able to select > it.
Hmmm, both xscanimage and xsane show a list of possible resolutions between 50 and 2400 that stretch vertically from the top to the bottom of the screen. I havent been able to shrink the size of the gui to see if in fact resolutions beyond 2400 are allowed, but are inaccessible because they are outside the visible screen, or if they not present. The resolutions listed are: 50 60 72 75 80 90 100 120 133 144 150 160 175 180 200 216 240 266 200 320 350 360 400 480 600 720 800 900 1200 1600 1800 2400 scanimage --help reports this list plus 3200dpi, so I suppose it is just a gui problem when the list of available resolutions is too long to fit on the screen. Maybe the list should be scrollable? Or maybe I need to discover how to shrink the size of the gui ?. Duncan ---------------------------------- E-Mail: Duncan Haldane <f.duncan.m.hald...@worldnet.att.net> Date: 12-Feb-2002 Time: 23:47:38 This message was sent by XFMail ----------------------------------