my HP ScanJet 3670 is not working under Fedora14. It used to work, when I was running WinXP on the same hardware. It is still working fine connected to my WinXP laptop's
troubleshooting I've done so far: [root at fedje ~]# yum list installed | grep -i sane sane-backends.i686 ? ? ? ? ? ? ? ? ? ? ?1.0.22-3.fc14 @updates sane-backends-libs.i686 ? ? ? ? ? ? ? ? 1.0.22-3.fc14 @updates sane-backends-libs-gphoto2.i686 ? ?1.0.22-3.fc14 ? ? ? ? ? ? @updates sane-frontends.i686 1.0.14-10.fc14 @fedora xsane.i686 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0.998-4.fc14 @updates xsane-common.i686 ? ? ? ? ? ? ? ? ? ? ?0.998-4.fc14 ? ? ? ? ? ? ?@updates [root at fedje ~]# sane-find-scanner ... found USB scanner (vendor=0x03f0, product=0x1405, chip=GL646_HP?) at libusb:002:002 ... [root at fedje ~]# scanimage --version scanimage (sane-backends) 1.0.22; backend version 1.0.22 [root at fedje ~]# scanimage -L No scanners were identified. ... [root at fedje ~]# lsusb ... Bus 002 Device 002: ID 03f0:1405 Hewlett-Packard ScanJet 3670 ... [root at fedje ~]# cat /proc/bus/usb/devices ... T: ?Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= ?2 Spd=12 ?MxCh= 0 D: ?Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= ?1 P: ?Vendor=03f0 ProdID=1405 Rev= 1.00 S: ?Manufacturer=Hewlett-Packard S: ?Product=HP Scanjet Scanner S: ?SerialNumber=CN399S289R C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 48mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: ?Ad=81(I) Atr=02(Bulk) MxPS= ?64 Ivl=0ms E: ?Ad=02(O) Atr=02(Bulk) MxPS= ?64 Ivl=0ms E: ?Ad=83(I) Atr=03(Int.) MxPS= ? 1 Ivl=8ms ... in /etc/sane.d/genesys.conf # Hewlett Packard ScanJet 3670c/3690c usb 0x03f0 0x1405 So all usb tools tell me, it is there, and it can be communicated with (serial#, pwr,) Is sane-find-scanner(1) not sure, why is the question mark (chip=GL646_HP?) scanimage -L ? does not detect it someone a clue why I cannot use this supported and working scanner under Fedora 14? Thanks for your time Kasper
