Zeb C. writes:
> Thanks Olaf
>
> I ran the command and my username was in the scanner group all
> along. still no devices found.
Sorry, I should have read the forum post more closely.
FYI, your scanner was first supported in sane-backends-1.0.24. That
means you need libsane-1.0.24. This version is available in utopic
(Ubuntu 14.10). Seeing that you are using trusty (Ubuntu 14.04), you
have libsane-1.0.23 which does *not* support your scanner.
You have two options:
- upgrade to utopic (Ubuntu 14.10)
- grab only libsane-1.0.24 and libsane-common from utopic (and if you
have it installed maybe also sane-utils and/or libsane-extras) and
install that
Furthermore, if you haven't done so already, remove that 99-local.rules
in /etc/udev/rules.d/. It is very broken, causes the error on boot that
you mentioned and is not needed with libsane-1.0.24.
Hope this helps,
--
Olaf Meeuwissen, LPIC-2 FLOSS Engineer -- AVASYS CORPORATION
FSF Associate Member #1962 Help support software freedom
http://www.fsf.org/jf?referrer=1962
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-requ...@lists.alioth.debian.org
