Hi Zeb, Instead of upgrading Ubuntu, you can use my ppa: https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git (sudo add-apt-repository ppa:rolfbensch/sane-git).
Cheers, Rolf Am 23.01.2015 um 00:54 schrieb Zeb C.: > Thank you Olaf > > I will upgrade tomorrow. It is a relief because the scanner is perfect for my > needs. > > Zeb > -------------------------------------------- > On Thu, 1/22/15, Olaf Meeuwissen <olaf.meeuwis...@avasys.jp> wrote: > > Subject: Re: [sane-devel] Cannon 9000f mark II > To: "Zeb C." <zcart...@yahoo.com> > Cc: sane-devel@lists.alioth.debian.org > Date: Thursday, January 22, 2015, 6:24 PM > > > Zeb C. writes: > > > Thanks Olaf > > > > I ran the command and my username was in the scanner > group all > > along. still no devices found. > > Sorry, I should have read the forum post more closely. > > FYI, your scanner was first supported in > sane-backends-1.0.24. That > means you need libsane-1.0.24. This version is > available in utopic > (Ubuntu 14.10). Seeing that you are using trusty > (Ubuntu 14.04), you > have libsane-1.0.23 which does *not* support your scanner. > > You have two options: > - upgrade to utopic (Ubuntu 14.10) > - grab only libsane-1.0.24 and libsane-common from utopic > (and if you > have it installed maybe also sane-utils > and/or libsane-extras) and > install that > > Furthermore, if you haven't done so already, remove that > 99-local.rules > in /etc/udev/rules.d/. It is very broken, causes the > error on boot that > you mentioned and is not needed with libsane-1.0.24. > > Hope this helps, > -- > Olaf Meeuwissen, LPIC-2 > FLOSS Engineer -- AVASYS CORPORATION > FSF Associate Member #1962 > Help support software freedom > > http://www.fsf.org/jf?referrer62 > > > -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
