The 64 bit SL 5.4 was used a dual core AMD processor in mini ATX - Serial ata sytem. We had a lot of problems with this system with SL 5.3 - video and disks didn't work. As a result the box set in the corner for 9 Mo. With SL 5.4 it works well except for the initial log in set up for a user - it's screwed up and you canno't set a user home directory other than /home. Once you set a users home directory if you remove the user later and need to add the user later the it the login data base is then loused up. Once you remove a user all is not cleaned up. Our solution to this is to Load it and set up internet, never add a user, and upgrade all packages and its fixed over night. There are a number of applications that run perfectly on SL 5.4 32 bit system but do not work well, do not work, or are missing libraries for the 64 bit system. From the operation I would assume that some pointers are set up as a 32 bit and they wrap. It pretty obvious in some music apps that the sliders (linear pots in the analog world) are cast a wrong size integer as the controls move so far and start back at the beginning - Not too cool. We installed a SL5.4 under Vmware running on a SL5.4 to test problem code. If it dies we can see where something is written to. Another App worth having is BeyondCompare. If you are looking for differences its very logical.
I will make a list of applications that have problems and post them. Larry Linder On Friday 26 February 2010 22:36, Jim McCarthy wrote: > Hello -- > > Has anyone downloaded the SLC54_ia64_dvd.iso image at this location: > > http://linuxsoft.cern.ch/cern/slc54/iso/ > > and successfully booted from it to install Scientific Linux CERN v5.4 for > Itanium ? > > I successfully downloaded the 3.7Gb ISO image onto an NTFS hard drive, > confirmed the MD5 sum matched the posted value, and used Roxio MyDVD to > burn successfully (or so it seemed) a DVD+R disk -- twice. I've tried to > boot off each of the DVDs in two different Itanium-2 HP workstations > (zx2000 and zx6000), and in all cases I get a message "File Not Found" ... > nor can I browse the DVD contents from the EFI shell. I have used the > drives in both HP workstations to successfully boot+install off DVD media > in the not-too-distant past. > > I'm posting to find out whether anyone else has created a valid > installation boot DVD from this ISO (and therefore I must be doing > something wrong in Roxio burning the DVD+R disks), or alternatively whether > the ISO image itself might be somehow flawed -- or isn't intended to be > bootable nor accessed via the EFI shell ? Or maybe no one else has tried > ? > > Assuming it's pilot error on my part, what DVD file system disk format > *should* I be selecting when using Roxio MyDVD to burn this ISO file onto > the DVD+R disk? (ISO9660, Joliet/ISO9660, or UDF ?) I selected the > default in the MyDVD application, but wonder if I should have chosen UDF > instead ? > > I used the same ISO9660-based default selection in Roxio MyDVD when > successfully creating bootable Scientific Linux v5.4 i386 DVD+R disks from > the two DVD install ISO images I downloaded from the mirror > linux1.fnal.gov. Is it possible the SLC DVD ISO filesystem format is > different, or might the posted SLC DVD ISO image itself be invalid ? > > Thanks in advance, > > -- Jim McCarthy > > > > -----Original Message----- > From: owner-scientific-linux-us...@listserv.fnal.gov On Behalf Of > Jaroslaw Polok > Sent: Friday, January 22, 2010 6:51 AM > To: linux-announce > Subject: Scientific Linux CERN: End of support for ia64 (Itanium II) > architecture on 31st of March 2010 > > Dear Scientific Linux CERN ia64 users. > > Due to a low demand and very marginal usage of > ia64 architecture in Scientific Linux CERN users > community we would like to announce that we will stop > the support for it on the 31st of March 2010. > > - No further Scientific Linux CERN 4 (SLC4) and > Scientific Linux CERN 5 (SLC5) updates will be > provided for ia64 platform after that date. > > - No future versions of Scientific Linux CERN for > ia64 will be released. > > - Current versions of SLC for ia64 will be removed > from our installation service. > > Existing ia64 SLC4/SLC5 CERN users are encouraged to > migrate to Red Hat Enterprise Linux 4/5 systems. > Please contact linux.supp...@cern.ch if > assistance with this migration process is needed. > > We would like to thank all ia64 users, especially > the CERN Openlab members for the support, feedback > and hardware supplied through the past years. > > linux.supp...@cern.ch