On 4 April 2011 09:59, Raimondo Giammanco [VKICC] <giamm...@vki.ac.be> wrote:
> I've just tested once again the card with ubuntu, now I'm 100% positive it > works (i.e. the e1g44etblk was the only wired port during iperf, eth0 was > disconnected). > > It works with ubuntu 10.04 server: > kernel 2.6.35-24-server > igb version 2.1.0-k2 > > It remains to be seen where the problem comes in SL (tested kernel: > 2.6.32-71.18.2.el6.x86_64) > > I'll see if I can compile kernel version 2.6.35 on SL or if the problem is > linked to my boot parameters (noapic acpi=off). Hi Raimondo, Thank you for keeping this m/l updated with the results of your experiments. I would suggest the following steps: (1) Check the Red Hat bug tracker for any related issues. (2) Review the need for your current boot parameters. (3) Build your own testing kernel from the latest stable long-term support tarball (linux-2.6.35.12.tar.bz2). Regards, Alan.