On 11/30/2013 09:34 AM, olli hauer wrote: > Sample from my minimal unattended install config >> grep network minimal.cfg > network --onboot yes --device eth0 --bootproto dhcp > > In case this param was not given check /etc/sysconfig/network >> grep -i network /etc/sysconfig/network > NETWORKING=yes
On 11/30/2013 09:23 AM, Tom H wrote:> On Sat, Nov 30, 2013 at 7:03 AM, > Do you have "--onboot=yes" on the "network" line of the kickstart > file? Hello! Thank you for the responses. I tinkered with a few variations, but have not made much progress. I started out with this line in my kickstart: network --bootproto=dhcp --device=eth0 --onboot=on And I thought maybe that was the problem, but even after the change I still have the same problem with no DHCP on boot. Here is some more information: $ sed -e '/^#/d' -e '/^$/d' anaconda-ks.cfg install url --url=http://192.168.1.34/scientificlinux/6.4/x86_64/os lang en_US.UTF-8 keyboard us network --onboot yes --device eth0 --mtu=1500 --bootproto dhcp rootpw --iscrypted $6$p86*T9ho$nNJYlm8M9ocYpBDsEUhLv74Uw12DuAi4N5a558PXBWAQwS0P9ZGC0ZTAe4l6/oKOaaWzek3w.PuDBori9WIB81 reboot firewall --service=ssh authconfig --useshadow --passalgo=sha512 selinux --enforcing timezone --utc America/Chicago bootloader --location=mbr --driveorder=sda --append="crashkernel=auto rhgb quiet" --password=$1$YHRi71$G/Lmi/o1xz60RrBLSeyCU/ repo --name="SL" --baseurl=http://192.168.1.34/scientificlinux/6.4/x86_64/os --cost=100 repo --name="SLFastbugs" --baseurl=http://192.168.1.34/scientificlinux/6.4/x86_64/updates/fastbugs/ --cost=1000 repo --name="SLSecurity" --baseurl=http://192.168.1.34/scientificlinux/6.4/x86_64/updates/security/ --cost=1000 %packages --nobase @Core %end %post --interpreter=/bin/bash yum install -y --nogpgcheck http://yum.puppetlabs.com/el/6/products/x86_64/puppetlabs-release-6-7.noarch.rpm yum install -y puppet chkconfig puppet on %end $ cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" BOOTPROTO="dhcp" HWADDR="00:22:19:E1:28:36" IPV6INIT="yes" MTU="1500" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" UUID="61008086-5e0e-4db2-8732-5b62bf5fc866" I changed that to the following, but still it doesn't get a DHCP IP until I run `ifup eth0`: DEVICE="eth0" BOOTPROTO="dhcp" HWADDR="00:22:19:E1:28:36" IPV6INIT="yes" MTU="1500" NM_CONTROLLED="no" NETWORKING="yes" ONBOOT="yes" TYPE="Ethernet" UUID="61008086-5e0e-4db2-8732-5b62bf5fc866" I went back to the original ifcfg-eth0 and installed NetworkManager (and all of these other packages: ConsoleKit ConsoleKit-libs ModemManager NetworkManager-glib avahi-autoipd dbus dnsmasq eggdbus libdaemon libgudev1 libnl libpcap libudev mobile-broadband-provider-info polkit ppp wpa_supplicant), and now I get a DHCP IP on boot, but I don't understand why I have to install a bunch of extra packages to get a DHCP IP on boot. What am I missing here? Thank you! ~Stack~
signature.asc
Description: OpenPGP digital signature