On Thu, Feb 06, 2025 at 07:23:44AM -0500, Christopher Lentocha wrote: > Indeed, the patch you provided works for both CSM in QEMU mode and > QEMU's bios.bin mode. > > Testing Results (For this whole time, just for reference): > > EDK2 Build Revision: e7d7f02c8e157e936855a091948757f78c7d0298 > SeaBIOS Build Revision: df9dd418b3b0e586cb208125094620fc7f90f23d > (SeaBIOS with your patch applied from your last message) > QEMU Build Revision: 621da7789083b80d6f1ff1c0fb499334007b4f51 > > QEMU command line I used is too long, but if you want it anyways, please > do ask! > > In short, I used pc-i440fx-7.1 with a Vista Install CD and Vista > installed QCOW2 Image, and switched between the firmware with the -bios > command-line option.
Then add a sata controller via -device I assume? Because 'pc-i440fx-7.1' uses ide storage by default. I've tested (the non-csm case only) using '-M q35' which uses ahci by default. More convenient as you can simply use '-hda' and '-cdrom' switches to add sata disk + cdrom (but could very well be that the vista image doesn't boot then if installed using '-M pc'). take care, Gerd _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-le...@seabios.org
