[sw-issues] [Issue 115708] Master document drops ove r-sized graphics in a frame
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115708 User pitonyak changed the following: What|Old value |New value Summary|Master document drops over|Master document drops over |-sized graphics in a frame|-sized graphics in a frame | | --- Additional comments from piton...@openoffice.org Mon Nov 22 01:18:24 + 2010 --- OK, so I cannot attach the files because they are too large, sorry about that. Many people have spent many hours tracking this issue. I determined the following: Open the Master document and everything looks fine. Use Tools > Update > Update All to perform a full update / refresh and images disappear (Many images from Chapter 3, for example). Removing the frames fixes the problem, but, for certain Documentation output methods we really require the frames. The important take away is that this appears to be related to the graphic in the frame. Now, edit chapter 3. I noticed the following characteristics: * All graphics are anchored as a character. * While editing chapter 3 directly, graphics visible in the master document provide the option to anchor the image to the frame, those that are not visible in the master document do not include Frame as an option. * Graphics not visible in the master document use some variation of a percentage on the width (rather than a fixed amount) or using "auto-size". Using the following steps causes the image to become visible: 1. Use the Picture dialog (double click on the figure) and set "Keep Ratio", do not check "autosize" or "relative". Set the size just a wee bit smaller (by say 0.05 inches) 2. Verify that the picture is in its own paragraph anchored as a character (and it should be) and then set the paragraph style to "OOoFigure", which it should already be, but, it is not. The result of this is that the figure is centered in the frame so that no part of the image touches the left or right edge of the frame. For a bit, I was manually resizing the frame, but, before I knew it, My development version of OOo was crashing, so, I stopped that. That should do it. Refresh the Master document and the images appear. So, it seems that this is somehow related to image size in the frame. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 115708] Master document drops ove r-sized graphics in a frame
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115708 Issue #|115708 Summary|Master document drops over-sized graphics in a frame Component|Word processor Version|OOo 3.2.1 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|writerneedsconfirm Reported by|pitonyak --- Additional comments from piton...@openoffice.org Mon Nov 22 00:58:41 + 2010 --- As of November 21, 2010, this bug has caused a stop on some documentation from the documentation project. I first became aware of the bug when I saw this (edited by me) post from Jean Hollis Weber When I open the master document, the chapter files appear to load up correctly. When I export to PDF, the first (automatic) step is to repaginate, at which point a large random sample of the figures disappear, making the resulting PDF useless. The pix are still in the file, because they reappear after closing and reopening (or when I do various other things), but every time I export to PDF, some disappea again. The same thing happens if I export to ODT, unlink the chapter files (thus embedding them), and then work with one big ODT. I've tried changing my memory settings in a way that solved a similar problem previously, but it's not helping now. Does anyone have any idea what's going on? And better still, how to fix it? I'm using OOO3.3RC4 on Ubuntu 10.10, but the same things happens with the OOo3.2 that comes with Ubuntu. I have not tried this on any version of Windows. The files are here, conveniently zipped into one file: http://www.oooauthors.org/english/userguide3/gs3/V3_3_revisions/OOo3.3-drafts.zip/view Or you can go to the folder and download them one at a time. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[api-issues] [Issue 114662] Search with attributes er ases all text
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=114662 Issue #|114662 Summary|Search with attributes erases all text Component|api Version|OOo 3.2.1 Platform|Unknown URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|jsc Reported by|pitonyak --- Additional comments from piton...@openoffice.org Tue Sep 21 20:05:16 + 2010 --- This bug was reported to me on the OOo mailing list. http://www.oooforum.org/forum/viewtopic.phtml?t=106461 I created a small test case and verified this on my computer. Consider this small program, looks innocent... Find something that matches an attribute (no replacing). Unfortunately, if you search for the wrong attribute, it will find everything in the document and delete it. Sub SearchTest(oProps()) Dim oFind Dim oFound Dim oDoc oDoc = ThisComponent oFind = oDoc.createSearchDescriptor() With oFind .SearchString = ".*" .SearchRegularExpression = True .SearchAll = True End With oFind.setSearchAttributes(oProps) oFound = oDoc.FindAll(oFind) print "" & oFound.count & " for " & oProps(0).Name End Sub Here is how you can call the test macro Note that this is very simple. Sub FindCharStyle Dim SearchProps(0) as new com.sun.star.beans.PropertyValue 'Matches everything, and erases everything that it finds. searchProps(0).name = "CharStyleName" searchProps(0).value = "_OOoComputerLiteral" searchProps(0).value = "xyzzy" '??SearchTest(searchProps) 'This finds things as expected searchProps(0).name = "CharWeight" searchProps(0).value = 100 SearchTest(searchProps) 'Fails searchProps(0).Name = "CharFontName" searchProps(0).Value = "Times New Roman" searchProps(0).Value = "Albany" SearchTest(searchProps) 'Finds stuff, but erases everything that it finds. searchProps(0).Name = "CharFontNameAsian" searchProps(0).Value = "HG Mincho Light J" '??SearchTest(searchProps) 'Works searchProps(0).Name = "CharFontPitch" searchProps(0).Value = 2 SearchTest(searchProps) 'Works searchProps(0).Name = "CharNoHyphenation" searchProps(0).Value = True SearchTest(searchProps) End Sub Searching on CharStyle name always matches, and then it erases all the text that it finds (well, it replaces it with an empty string). The same for CharFontNameAsian. Searching on CharFontName simply never matches, which is also a bug. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@api.openoffice.org For additional commands, e-mail: issues-h...@api.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[script-issues] [Issue 112722] Format statement problem with dd and nn
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112722 --- Additional comments from piton...@openoffice.org Mon Jun 28 12:28:24 + 2010 --- When run, the macro demonstrates, on at least the two test systems, that nn, by itself, displays the two digit hour and that when used in the last format string between two colons it displays the three digit day. I tested with the two digit NN and this returned the same result as nn. You describe the values in the Help system for NN and NNN. Where in the help system? What topic shows this? For the Basic Language and the Format statement, none of these are documented. I do not even know where I obtained my original list (but I can guess). If the help documents NN and NNN as you describe, then it is in error because NN does not show the three digit day (at least not on my computer). NNN does appear to display the full day (the same as ). On a whim, I added "nnn" and received the full day name, "" for the full day name and a comma, and "n" for the full day name, a comma, and an n. I suppose that I really should simply read the code. Please point me to the full list of format specifiers in the help (how do I find them). I want to see if &, @, and ! are also documented as working. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@script.openoffice.org For additional commands, e-mail: issues-h...@script.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[script-issues] [Issue 112722] Format statement problem with dd and nn
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112722 --- Additional comments from piton...@openoffice.org Sat Jun 26 13:06:29 + 2010 --- I assume that this will be assigned to sb as usual... but I will not make that call for now. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@script.openoffice.org For additional commands, e-mail: issues-h...@script.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[script-issues] [Issue 112722] Format statement problem with dd and nn
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112722 Issue #|112722 Summary|Format statement problem with dd and nn Component|scripting Version|OOo 3.2.1 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|kr Reported by|pitonyak --- Additional comments from piton...@openoffice.org Sat Jun 26 13:05:12 + 2010 --- I see errors in the 64-bit Linux release with this simple macro Sub strangeFormats Dim i% Dim d As Date d = now() Dim s$ Dim formats formats = Array("q", "y", "yy", "", _ "m", "mm", "mmm", "", _ "d", "dd", "ddd", "", "d", "dd", _ "w", "ww", "h", "hh", "n", "nn", "s", "ss", _ "t", "c", _ "d// h:nn:ss") For i = LBound(formats) To UBound(formats) s = s & formats(i) & " => " & Format(d, formats(i)) & CHR$(10) Next MsgBox s End Sub Individually, each format specifier works correctly. The two in question: dd => Two digit day nn => two digit minute Incorrect: "d// h:nn:ss" => nn produces the expected output from ddd, namely the three letter day name (for me this was fri). I asked for testing on the dev mailing list and Johnny Rosenberg tested on a 32-bit standard build running on Ubuntu. He had the following to say: ** Same happens for me, except that day name is two letters (in Swedish): d// h:nn:ss => 26-juni-2010 9:lö:46 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@script.openoffice.org For additional commands, e-mail: issues-h...@script.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 84159] Crash while closing the do cument: SfxItemPool cannot contain more than 2 ^16 non-poolable items
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=84159 --- Additional comments from piton...@openoffice.org Thu Jun 17 01:13:47 + 2010 --- cornouws, can you try loading the latest version of AndrewMacro.odt that I uploaded and then close the document (do not save it first). When I try using the current 64-bit version on Fedora and the latest windows release on XP, there is a crash on close (just load then close). - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 84159] Crash while closing the do cument: SfxItemPool cannot contain more than 2 ^16 non-poolable items
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=84159 --- Additional comments from piton...@openoffice.org Thu Jun 17 01:10:56 + 2010 --- Created an attachment (id=70043) Using standard OOo version 3.2.1, crashes when document is closed. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 84159] Crash while closing the do cument: SfxItemPool cannot contain more than 2 ^16 non-poolable items
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=84159 --- Additional comments from piton...@openoffice.org Wed Jun 16 12:44:00 + 2010 --- The crash occurs when the document is closed, not when it is saved... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[api-issues] [Issue 112431] com.sun.star.util.TextSea rch does not support documented options.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112431 Issue #|112431 Summary|com.sun.star.util.TextSearch does not support document |ed options. Component|api Version|OOo 3.2.1 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|jsc Reported by|pitonyak --- Additional comments from piton...@openoffice.org Wed Jun 16 02:05:12 + 2010 --- Originated here: http://www.oooforum.org/forum/viewtopic.phtml?t=101554&postdays=0&postorder=asc&start=0&sid=245f48dd73d845f7106cd6e8339de913 To use the com.sun.star.util.TextSearch service for a case-insensitive search, the search options state that ALL_IGNORE_CASE is deprecated and that TransliterationModulesNew should be used. See: http://api.openoffice.org/docs/common/ref/com/sun/star/util/SearchFlags.html First, note that TransliterationModules has a constant for IGNORE_CASE that works, but, the document specifically names another set of constants. http://api.openoffice.org/docs/common/ref/com/sun/star/i18n/TransliterationModules.html You can see the new constants here: http://api.openoffice.org/docs/common/ref/com/sun/star/i18n/TransliterationModulesNew.html If I use these constants, I can use UPPERCASE_LOWERCASE or LOWERCASE_UPPERCASE with no problem. I am not, however, able to use IGNORE_CASE while setting the transliteration flags. I expect the following macro to find both aaa and AAA Sub StringTextSearch Dim oTextSearch ' TextSearch service Dim sStrToSearch As String' String to serach Dim sMatchString As String' String that was found Dim aSearchResult ' http://api.openoffice.org/docs/common/ref/com/sun/star/util/SearchResult.html Dim rank As Long Dim iMatchStartPos As Long Dim iMatchLen As Long Dim aSrcOpt As New com.sun.star.util.SearchOptions Dim s$ Dim enLocale As New com.sun.star.lang.Locale enLocale.Language = "en" enLocale.Country = "US" oTextSearch = CreateUnoService("com.sun.star.util.TextSearch") s = "" With aSrcOpt 'http://api.openoffice.org/docs/common/ref/com/sun/star/util/SearchFlags.html .searchFlag = com.sun.star.util.SearchFlags.REG_EXTENDED .Locale = enLocale 'Supports ABSOLUTE, REGEXP, and APPROXIMATE .algorithmType = com.sun.star.util.SearchAlgorithms.REGEXP .searchString = "a+" 'This does not work. .transliterateFlags = com.sun.star.i18n.TransliterationModulesNew.IGNORE_CASE 'This works '.transliterateFlags = com.sun.star.i18n.TransliterationModulesNew.UPPERCASE_LOWERCASE End With oTextSearch.setOptions(aSrcOpt) sStrToSearch = "aaa hello AAA" aSearchResult = oTextSearch.searchForward(sStrToSearch, 0,Len(sStrToSearch)-1 ) 'Print aSearchResult.subRegExpressions REM subRegExpressions has value zero if no match... Do While aSearchResult.subRegExpressions > 0 'Print "" + LBound(aSearchResult.startOffset) + ":" + UBound(aSearchResult.startOffset) rank = aSearchResult.subRegExpressions - 1 iMatchStartPos = aSearchResult.startOffset(rank) + 1 iMatchLen = aSearchResult.endOffset(rank) - aSearchResult.startOffset(rank) sMatchString = Mid(sStrToSearch, iMatchStartPos, iMatchLen) s = s & "(" + LBound(aSearchResult.startOffset) & ":" + UBound(aSearchResult.startOffset)& ") => " & sMatchString & CHR$(10) aSearchResult = oTextSearch.searchForward(sStrToSearch, aSearchResult.endOffset(rank)+1,Len(sStrToSearch)-1 ) Loop MsgBox s End Sub - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@api.openoffice.org For additional commands, e-mail: issues-h...@api.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[script-issues] [Issue 112383] CLng("&HFFFFFFFF") fails on 64-bits rather than returning -1
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112383 User pitonyak changed the following: What|Old value |New value Platform|All |Opteron/x86_64 --- Additional comments from piton...@openoffice.org Mon Jun 14 13:13:59 + 2010 --- Changed the platform to show x86_64. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@script.openoffice.org For additional commands, e-mail: issues-h...@script.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[script-issues] [Issue 112383] CLng("&HFFFFFFFF") fails on 64-bits rather than returning -1
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112383 Issue #|112383 Summary|CLng("&H") fails on 64-bits rather than return |ing -1 Component|scripting Version|OOo 3.2.1 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|kr Reported by|pitonyak --- Additional comments from piton...@openoffice.org Mon Jun 14 13:13:01 + 2010 --- The current 32-bit windows versions, and on older Linux 32-bit versions (I did not check current Linux 32-bit versions), the following two lines both print -1. print &H print CLng("&H") On the 64-bit Linux version, First, I see :4294967295 Followed by:Inadmissible value or data type. Overflow. I initially posted the following probe to the dev mailing list: I do not know when the change was made, but, CLng used to be able to convert "negative" values represented as Hex, but, not in 3.20. I last tested in version 2.x. Here is my latest code to show this: Sub ExampleCLngWithHex On Error Resume Next Dim s$, i% Dim v() v() = Array("&HF", "&HFF", "&HFFF", "&H",_ "&HF", "&HFF", "&HFFF", "&H",_ "&HF",_ "&HE", "&HFE", "&HFFE", "&HFFFE",_ "&HE", "&HFE", "&HFFE", "&HFFFE",_ "&HE") For i = LBound(v()) To UBound(v()) s = s & i & " CLng(" & v(i) & ") = " s = s & CLng(v(i)) s = s & CHR$(10) Next MsgBox s End Sub This fails on CLng("&H") rather than returning -1. Add an extra F and it quietly fails internally and returns 0. Serg Bormant helped me narrow the problem to the 64-bit version. Thanks Serg! - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@script.openoffice.org For additional commands, e-mail: issues-h...@script.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 111970] ConfigurationProvider no longer supports enableasync
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=111970 Issue #|111970 Summary|ConfigurationProvider no longer supports enableasync Component|framework Version|OOO300m9 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|sb Reported by|pitonyak --- Additional comments from piton...@openoffice.org Mon May 31 17:00:17 + 2010 --- Stephan, as you requested :-) When http://qa.openoffice.org/issues/show_bug.cgi?id=101955 was integrated into DEV300m48, Support for enableasync was accidentally left out. Able to test by running the following macro line take from Andrew Pitonyak's macro formatter. oConfigProvider = GetProcessServiceManager().createInstanceWithArguments(_ "com.sun.star.configuration.ConfigurationProvider",_ Array( CreateProperty( "enableasync", bEnableSync ) ) ) - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 84159] Crash while closing the do cument: SfxItemPool cannot contain more than 2 ^16 non-poolable items
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=84159 --- Additional comments from piton...@openoffice.org Thu Feb 4 01:03:19 + 2010 --- Yeah, I have a stack of changes that I have not added because my document crashes. I have only run across a few documents that crash because of this issue, but, when it does, you are done making changes... :-) - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 107802] Export to PDF fails with some graphics.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=107802 --- Additional comments from piton...@openoffice.org Tue Dec 22 00:04:13 + 2009 --- Given the description, I see how I missed it. Good catch "hdu"! - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 107802] Export to PDF fails with some graphics.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=107802 --- Additional comments from piton...@openoffice.org Mon Dec 21 03:16:37 + 2009 --- I ran these tests and generated these files based on a complaint from another user. After verifying the issue, I am filing the bug. I spent time searching for similar reports, this is the best that I could find, but I believe them to be different: 39292 102115 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 107802] Export to PDF fails with some graphics.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=107802 --- Additional comments from piton...@openoffice.org Mon Dec 21 03:12:50 + 2009 --- Created an attachment (id=66741) Incorrectly generated PDF file. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 107802] Export to PDF fails with some graphics.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=107802 --- Additional comments from piton...@openoffice.org Mon Dec 21 03:12:08 + 2009 --- Created an attachment (id=66740) Impress document that generates the error. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 107802] Export to PDF fails with some graphics.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=107802 Issue #|107802 Summary|Export to PDF fails with some graphics. Component|Presentation Version|OOo 3.1.1 Platform|Unknown URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|save-export Assigned to|graphicsneedsconfirm Reported by|pitonyak --- Additional comments from piton...@openoffice.org Mon Dec 21 03:10:35 + 2009 --- Posting for another, but the starting point was an Impress document with three slides. Two slides export fine, one slide shows nothing in Acrobat reader. To my knowledge, this has only been tested on Linux. On Fedora 12 (64-bit), I generate the PDF. If I load the PDF in acrobat, I see at least some of the shapes flash on the screen, and then they disappear. I will attach 1p_001.odp, the original Impress document, and the generated PDF. I then ran the following commands: [a...@pitonyak g]$ pdftops 1p_001.pdf 1p_001.ps Error (512): Unknown operator 'l324' Error (513): Too few (1) args to 'm' operator Error (1001): Unknown operator 'l612' Error (1004): Too few (1) args to 'm' operator Error (512): Unknown operator 'l324' Error (513): Too few (1) args to 'm' operator Error (1001): Unknown operator 'l612' Error (1004): Too few (1) args to 'm' operator [a...@pitonyak g]$ ps2pdf 1p_001.ps 1p_001_new.pdf [a...@pitonyak g]$ acroread 1p_001_new.pdf & The resulting PDF is usable. Note the errors while converting from PDF to PS. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 92623] Automatic appending filety pe
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92623 --- Additional comments from piton...@openoffice.org Wed Sep 30 00:10:16 + 2009 --- juice_malone, can you verify this issue? I have never had trouble with OOo not including file extensions. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 89208] Increment Increase Auto fi ll error
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89208 --- Additional comments from piton...@openoffice.org Wed Sep 30 00:07:13 + 2009 --- This sounds like an enhancement request, not a defect. The help discusses how to create a single selection, not multiple selections. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 85153] Printing overlapped images produces white page
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=85153 --- Additional comments from piton...@openoffice.org Wed Sep 30 00:02:04 + 2009 --- Can you post a small document that demonstrates this problems? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 88735] Calc garbling whole worksh eet when saving as XLS
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88735 --- Additional comments from piton...@openoffice.org Tue Sep 29 23:56:19 + 2009 --- fireball69, please verify that this problem still exists. If yes, please attach a sample document so that we can reproduce the problem. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 89045] soffice.exe doesn't get ki lled when OO file closure or applciation termi nation
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89045 --- Additional comments from piton...@openoffice.org Tue Sep 29 23:55:19 + 2009 --- I think that more information is required. If there is an issue with starting OOo and then existing OOo, yet a copy of OOo is still running, then it is likely the quick starter. Chucha, please verify that this is this problem, and if so, then please close your issue. Note that to date, Chucha has not responded. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 84048] CSV import brakes on in-te xt double-quotes.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=84048 --- Additional comments from piton...@openoffice.org Tue Sep 29 23:47:55 + 2009 --- According to the standard, "If double-quotes are used to enclose fields, then a double-quote appearing inside a field must be escaped by preceding it with another double quote." See: http://tools.ietf.org/html/rfc4180 OOo does properly support the standard and import a double quote escaped by a double quote. I recommend that the reporter use a script or macro to transform the input to a valid CSV file before import. Strictly speaking, A backslash is wrong. The requester, however, is asking that OOo be modified to support a method that used to be common. I cannot comment on whether or not this was ever standard, just common. I would be inclined to call this an enhancement request, not a defect report. Test by pasting this into a Calc document: "aaa","b""bb","ccc" "aaa","b\"bb","ccc" - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[gsl-issues] [Issue 71119] crash for creating a edita ble Qt object in KDE
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=71119 --- Additional comments from piton...@openoffice.org Tue Sep 29 23:27:05 + 2009 --- My opinion is that this is likely no longer an issue. I intended to test this problem, but the report does not provide sufficient information for me to attempt. I see no activity on the scim-qtimm project since 2005. http://www.scim-im.org/projects/scim_qtimm jianhuajiao, can you verify that this is still an issue. If not, please close the issue. If this is still an issue, then please provide detailed instructions on how to reproduce the problem. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@gsl.openoffice.org For additional commands, e-mail: issues-h...@gsl.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 36155] Add support for hanging pu nctuation
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=36155 --- Additional comments from piton...@openoffice.org Tue Sep 29 23:14:19 + 2009 --- As of OOo 3.1.1, this is not supported. I did not even know that such an option existed. I was not aware that this was common anywhere. A good example is provided here: http://en.wikipedia.org/wiki/Hanging_punctuation - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 103773] Basic editor always save to a new file
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=103773 User pitonyak changed the following: What|Old value |New value Ever confirmed| |1 Status|UNCONFIRMED |NEW --- Additional comments from piton...@openoffice.org Tue Sep 29 22:38:32 + 2009 --- To avoid the obvious "no, I mean 3.1.1", I installed the latest from the OOo web site and tested again. The issue is confirmed, therefore, on the 64-bit RPM version. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 103773] Basic editor always save to a new file
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=103773 User pitonyak changed the following: What|Old value |New value CC|'ab' |'ab,pitonyak' Version|OOo 2.4.1 |OOo 3.1 --- Additional comments from piton...@openoffice.org Tue Sep 29 22:23:58 + 2009 --- I can confirm with version 3.1.0 on Fedora. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 84159] Crash while closing the do cument: SfxItemPool cannot contain more than 2 ^16 non-poolable items
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=84159 User pitonyak changed the following: What|Old value |New value CC|'tjfrazier' |'pitonyak,tjfrazier' --- Additional comments from piton...@openoffice.org Wed Sep 9 12:51:06 + 2009 --- Added myself to the CC list because 104896 was marked as a duplicate of this. Seems that this bug now causes AndrewMacro.odt to crash. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 104896] AndrewMacro.odt crashes O Oo on exit
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=104896 --- Additional comments from piton...@openoffice.org Wed Sep 9 05:27:22 + 2009 --- Interesting I noticed that on Windows, it seems to freeze that window. If I have another document open, I can use that still open document to tell OOo to exit. I usually have my document open on Linux rather than Windows. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 104896] AndrewMacro.odt crashes O Oo on exit
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=104896 --- Additional comments from piton...@openoffice.org Wed Sep 9 01:24:10 + 2009 --- On Fedora, this triggers a sending of an email with an error description.This does not occur from Windows. Writer Open, then close AndrewMacro.odt http://openoffice.org/2002/errormail"; usertype=""> http://openoffice.org/2002/reportmail"; version="1.1" feedback="true" email="and...@pitonyak.org"> Write http://openoffice.org/2002/officeinfo"; build="310m11(Build:9399)" platform="unxlngx6.pro" language="" exceptiontype="11" product="OpenOffice.org 3.1" procpath="/opt/openoffice.org3/program/"/> http://openoffice.org/2002/systeminfo";> - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 104896] AndrewMacro.odt crashes O Oo on exit
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=104896 --- Additional comments from piton...@openoffice.org Tue Sep 8 16:56:42 + 2009 --- Splitting the document allows both portions to be read and closed with no issues, I do remember a discussion, that I cannot find, regarding a large document that used too many styles in a single document. This document uses the same styles many times, as opposed to different styles. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 104896] AndrewMacro.odt crashes O Oo on exit
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=104896 --- Additional comments from piton...@openoffice.org Tue Sep 8 14:47:05 + 2009 --- Created an attachment (id=64619) AndrewMacro.odt - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 104896] AndrewMacro.odt crashes O Oo on exit
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=104896 Issue #|104896 Summary|AndrewMacro.odt crashes OOo on exit Component|Word processor Version|OOo 3.1 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|writerneedsconfirm Reported by|pitonyak --- Additional comments from piton...@openoffice.org Tue Sep 8 14:46:15 + 2009 --- If you load AndrewMacro.odt (http://www.pitonyak.org/AndrewMacro.odt), you can inspect and edit the document with no problems. When you exit OOo, however, OOo crashes (or freezes the closed window). This has been observed with similar variations on Windows XP and Ubuntu. I will perform more tests after I upload a cpoy of the document known to cause the problem. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 96587] Notes API does not support text formatting
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=96587 User pitonyak changed the following: What|Old value |New value CC|'bmarcelly' |'bmarcelly,pitonyak' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 98158] Can not sort cross referen ce data
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=98158 --- Additional comments from piton...@openoffice.org Fri Jan 16 19:22:16 + 2009 --- Created an attachment (id=59437) Contains example data that can be sorted. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 98158] Can not sort cross referen ce data
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=98158 Issue #|98158 Summary|Can not sort cross reference data Component|Word processor Version|OOo 3.0 Platform|Unknown URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|writerneedsconfirm Reported by|pitonyak --- Additional comments from piton...@openoffice.org Fri Jan 16 19:21:19 + 2009 --- Text in cross reference fields are not used during a sort. I first saw the problem in a text table. I created a text table. One column contains a reference to a section. Select the data and sort on the column with the references. (Use Table -> Sort) Next, I added the references in the text one per line. Select the references. Use Tools -> Sort Sort does not sort based on the reference data. I suppose that this is the same reason that you can not search for the text contained in a field. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[api-issues] [Issue 97291] Incorrect graphic size and aspect ration on insert.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=97291 --- Additional comments from piton...@openoffice.org Tue Dec 16 00:08:58 + 2008 --- I should mention that this problem did NOT exist in OOo 2.4, so this error is a regression. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@api.openoffice.org For additional commands, e-mail: issues-h...@api.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[api-issues] [Issue 85105] ActualSize of com.sun.star .text.TextGraphicObject
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=85105 --- Additional comments from piton...@openoffice.org Tue Dec 16 00:05:26 + 2008 --- Although issue 97291 is different, they may have related solutions: http://www.openoffice.org/issues/show_bug.cgi?id=97291 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@api.openoffice.org For additional commands, e-mail: issues-h...@api.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[api-issues] [Issue 97291] Incorrect graphic size and aspect ration on insert.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=97291 --- Additional comments from piton...@openoffice.org Tue Dec 16 00:04:21 + 2008 --- Created an attachment (id=58837) Example of the resulting problem, and contains the macro. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@api.openoffice.org For additional commands, e-mail: issues-h...@api.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[api-issues] [Issue 97291] Incorrect graphic size and aspect ration on insert.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=97291 Issue #|97291 Summary|Incorrect graphic size and aspect ration on insert. Component|api Version|OOo 3.0 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|jsc Reported by|pitonyak --- Additional comments from piton...@openoffice.org Tue Dec 16 00:03:05 + 2008 --- Insert an image into a table cell using the API. If the image size is too wide for the table cell, then the image sizes incorrectly. This process works just fine when using the GUI. I saw this behavior after inserting the image into a table cell using the following code: oDoc = ThisComponent oText = oDoc.getText() oTable=oDoc.getTextTables().getByName("Table1") oImage = oDoc.createInstance( "com.sun.star.text.GraphicObject" ) oImage.GraphicURL = "file:///andrew0/home/andy/Pelosi.jpg" oImage.AnchorType = com.sun.star.text.TextContentAnchorType.AS_CHARACTER oCell = oTable.getCellByPosition( 0, 0 ) oText = oCell.getText() oCursor = oText.createTextCursor() oText.insertTextContent( oCursor, oImage, False ) When the image is inserted into the table, a height and width are assigned. The assigned height and width have the correct aspect ration.Unfortunately, the width is wider than the table cell. After inserting the image, look at the actual height and width from the graphic dialog. The values are completely wrong. Of course, you can't check the actual size of the image (see http://www.openoffice.org/issues/show_bug.cgi?id=85105). - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@api.openoffice.org For additional commands, e-mail: issues-h...@api.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 91739] Spell check marks correct words as wrong and misspelled words as correct
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=91739 --- Additional comments from [EMAIL PROTECTED] Thu Sep 11 04:26:25 + 2008 --- See http://qa.openoffice.org/issues/show_bug.cgi?id=93738 for a possible workaround for advanced users (if you do not mind installing a development version and manually copying files around). - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 93226] spellchecker does not work (3.0)
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93226 --- Additional comments from [EMAIL PROTECTED] Thu Sep 11 04:22:57 + 2008 --- Similar to: Issue 91739 Issue 92681 Issue 92771 I used OOo 3.0 RC1 All en-US words are marked as spelled incorrectly on a Linux FC9 AMD64 system. I installed RC1 on FC9, and I do not appear to have en_US available for spell check... I did a test. First, I looked in /opt/openoffice.org3/share/uno_packages/cache/uno_packages/za2jX9_/dict-en.oxt for files containing en_US. I found two files th_en_US_v2.dat th_en_US_v2.idx Next, I looked at a dev build in /opt/ooo-dev3/share/uno_packages/cache/uno_packages/Bo3dC6_/dict-en.oxt. I found a few more files. en_US.aff en_US.dic README_en_US.txt th_en_US_v2.dat th_en_US_v2.idx If I copy the missing files, then everything works. The file description.xml differed. I looked at the differences and noticed: [EMAIL PROTECTED] opt]# diff ./openoffice.org3/.../description.xml ./ooo-dev3/.../description.xml 4c4 < --- > 6c6 < English spelling and hyphenation dictionaries and thesaurus --- > Spelling and hyphenation dictionary for English Interesting. Now that I think about it, during the install using "rpm -i *.rpm", it stated that hunspell was already installed, but it did not generate an error. Copying the missing files caused things to work. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 87362] Regexp find/replace with f ormat and undo
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=87362 --- Additional comments from [EMAIL PROTECTED] Wed Jul 2 23:58:31 + 2008 --- Thanks for your fast reply... Can you either set this to "worksforme", or shall I do this? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 87362] Regexp find/replace with f ormat and undo
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=87362 User pitonyak changed the following: What|Old value |New value CC|''|'pitonyak' --- Additional comments from [EMAIL PROTECTED] Wed Jul 2 04:49:18 + 2008 --- I should say that the description and and the attachment are excellent examples of how a bug report should be! I tried to verify this bug using development release m22 on 64-bit Fedora 9 Linux. I am using the 32-bit release, which I only mention in case there is a 64-bit development release. I am not able to reproduce this bug. csernica, can you recheck this with the latest development release of OOo? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 91060] Applied Numbering style ch anges after save.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=91060 --- Additional comments from [EMAIL PROTECTED] Wed Jun 25 14:51:10 + 2008 --- Side note, I saw this issue with development build 20 and 21. The problem does not exist in 2.4 or any production release. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 91060] Applied Numbering style ch anges after save.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=91060 --- Additional comments from [EMAIL PROTECTED] Wed Jun 25 14:50:09 + 2008 --- Created an attachment (id=54735) Demonstrates bad numbering - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 91060] Applied Numbering style ch anges after save.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=91060 Issue #|91060 Summary|Applied Numbering style changes after save. Component|Word processor Version|OOo 3.0 Beta Platform|Unknown URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|mru Reported by|pitonyak --- Additional comments from [EMAIL PROTECTED] Wed Jun 25 14:48:56 + 2008 --- I use a custom numbering style to number headings. I save the document. Load the document. Apply my heading style, and the custom numbering style, and the numbering starts at 1. This acts like it restarts numbering each time... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 89527] Current Document not showi ng up in Library during macro assigment
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89527 --- Additional comments from [EMAIL PROTECTED] Sun Jun 15 23:03:18 + 2008 --- This problem still exists in the m19 development build. The issue with a Calc function, however, is fixed. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 89527] Current Document not showi ng up in Library during macro assigment
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89527 --- Additional comments from [EMAIL PROTECTED] Sun Jun 15 01:54:26 + 2008 --- I suspect that this bug is related to the fact that a macro in a Calc document is not visible as a Calc function. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 89604] autocorrection can't be un done
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89604 --- Additional comments from [EMAIL PROTECTED] Sat Jun 14 12:00:04 + 2008 --- Off hand, I think that it is working as it should. Based on your feedback, I performed a few experiments. I found a word that would change with auto-correct. 1. Type word in the cell. 2. Type a space. 3. Auto-correct changes the word 4. Use Ctrl+Z to change the word back. The example above worked because there was a space after the word. Now, lets try another one. 1. Pre F2 to enter edit mode. 2. Enter the word 3. Use Shift+Home to select the word 4. Press Tab to leave the cell no time, wife handing me a baby... Note that on the auto-correct menu, you can suspend any of the replacement options (such as table lookup). OOo does have a smart tag feature, I tested it in version 2.4 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 89604] autocorrection can't be un done
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89604 --- Additional comments from [EMAIL PROTECTED] Sat Jun 14 02:05:54 + 2008 --- Please provide an example of how to cause something to auto-correct. I tried to verify this bug, but since I do not know how to trigger auto-correction... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 89527] Current Document not showi ng up in Library during macro assigment
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89527 User pitonyak changed the following: What|Old value |New value Ever confirmed| |1 Status|UNCONFIRMED |NEW Keywords| |oooqa --- Additional comments from [EMAIL PROTECTED] Sat Jun 14 01:59:41 + 2008 --- Only My Macros and OpenOffice.org macros are available in the list. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 73968] Opening a password protect ed file looses focus after loading
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=73968 User pitonyak changed the following: What|Old value |New value CC|'jwt' |'jwt,pitonyak' --- Additional comments from [EMAIL PROTECTED] Wed Jun 4 03:35:48 + 2008 --- I see this with 3.0 Beta on 64-bit Fedora 9. I am not using a 64-bit build, just the standard 32-bit. Adding myself to the CC list. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 89169] Glitch in Word Count
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89169 User pitonyak changed the following: What|Old value |New value CC|'aziem' |'aziem,pitonyak' --- Additional comments from [EMAIL PROTECTED] Mon Jun 2 03:01:41 + 2008 --- I see the same problem using the OOo 3.0 Beta while running on Fedora 9, 64-bit. Also prepare to report the problem. I see that the document statistics are also completely wrong. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 90123] Copy paste does not copy p age break
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90123 Issue #|90123 Summary|Copy paste does not copy page break Component|Word processor Version|OOo 3.0 Beta Platform|Unknown URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|mru Reported by|pitonyak --- Additional comments from [EMAIL PROTECTED] Thu May 29 19:31:55 + 2008 --- 1. Create a Write document. 2. Insert a page break, and change the page style. 3. Select text that includes the page break. 4. Copy to the clip board. 5. Paste the text somewhere. The text is copied, but not the page break. This is a regression - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 89859] Incorrect heading order in Navigator
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89859 --- Additional comments from [EMAIL PROTECTED] Fri May 23 14:01:32 + 2008 --- Created an attachment (id=53885) Demonstrates the heading problem - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 89859] Incorrect heading order in Navigator
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89859 Issue #|89859 Summary|Incorrect heading order in Navigator Component|Word processor Version|OOo 3.0 Beta Platform|Unknown URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|mru Reported by|pitonyak --- Additional comments from [EMAIL PROTECTED] Fri May 23 14:00:32 + 2008 --- Document uses styles "Heading 1" through "Heading 4". Heading 3 is in a table. Heading 4 is in a table in a table. Navigator shows all headings, but "Heading 4" styles are displayed before everything else. For example, text in the document in the following order: one two three four Displays in the Navigator in the following order: four one two three I first saw this in OOo 3.0 beta. I tested the document in OOo 2.4, and the problem is there as well. In other words, this is NOT a regression. Document started as an RTF report generated by Enterprise Architect. Opened document in Word. Saved document as a .DOC from word. Imported document into OOo. I know that it is more than this, because a document created directly in the stated format is fine. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 89525] RTF: inserting RTF file cr ashes OOo
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89525 --- Additional comments from [EMAIL PROTECTED] Fri May 16 12:27:37 + 2008 --- I created bug 89557 to deal with the underline issue. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 89557] RTF incorrect import, adds underline
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89557 --- Additional comments from [EMAIL PROTECTED] Fri May 16 12:26:12 + 2008 --- Created an attachment (id=53712) Text is incorrectly underlined (it should not be). - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 89557] RTF incorrect import, adds underline
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89557 Issue #|89557 Summary|RTF incorrect import, adds underline Component|Word processor Version|OOo 3.0 Beta Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|open-import Assigned to|mru Reported by|pitonyak --- Additional comments from [EMAIL PROTECTED] Fri May 16 12:25:24 + 2008 --- I have an RTF document that incorrectly adds underlines to most of the text when it is opened in OOo. This same document is the same document used in bug 89525. I will attach here as well. This is NOT a regression because it has the problem in a previous version of OOo. http://www.openoffice.org/issues/show_bug.cgi?id=89525 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 89525] Import RTF crashes OOo
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89525 --- Additional comments from [EMAIL PROTECTED] Thu May 15 19:19:22 + 2008 --- Similar issue: 53543 I am able to open and/or insert the RTF file attached to issue 53543 with no problems. Perhaps this is the same bug as issue: 83162 I am able to open the attached RTF files on issue 83162, but I am not able to insert these files into an existing (empty) OOo file. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 89525] Import RTF crashes OOo
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89525 --- Additional comments from [EMAIL PROTECTED] Thu May 15 19:11:53 + 2008 --- Created an attachment (id=53676) Import this file into a new Write documen to crash OOo - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 89525] Import RTF crashes OOo
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=89525 Issue #|89525 Summary|Import RTF crashes OOo Component|Word processor Version|OOo 3.0 Beta Platform|All URL| OS/Version|Windows XP Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|mru Reported by|pitonyak --- Additional comments from [EMAIL PROTECTED] Thu May 15 19:10:54 + 2008 --- I created one RTF document using Enterprise Architect. I can open the RTF document in OOo, but there are issues with respect to too many underlines. If I import the document, however, OOo crashes. I tested with OOo 2.4.0, and this also crashes 2.4.0. In other words, this is NOT a regression issue. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[api-issues] [Issue 76752] Bug with polylineshape wit h OOo2.2 under linux
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=76752 User pitonyak changed the following: What|Old value |New value CC|''|'pitonyak' --- Additional comments from [EMAIL PROTECTED] Sun Nov 4 20:13:42 + 2007 --- First of all, you do not declare your variables. OK, it works fine, but it really bothers me... Does this version work for you? Sub LigneBrisee_new() Dim monDocument As Object, maPage As Object Dim maForme As Object Dim lesPoints(4) As New com.sun.star.awt.Point monDocument = thisComponent monTexte = monDocument.Text monCurseur = monTexte.createTextCursor maPage = monDocument.DrawPage maForme = monDocument.createInstance("com.sun.star.drawing.PolyLineShape") maForme.AnchorType = com.sun.star.text.TextContentAnchorType.AT_PAGE maForme.HoriOrientRelation = com.sun.star.text.RelOrientation.FRAME maForme.VertOrientRelation = com.sun.star.text.RelOrientation.FRAME lesPoints(0).X = 2100 : lesPoints(0).Y = 2100 lesPoints(1).X = 4500 : lesPoints(1).Y = 4000 lesPoints(2).X = 2200 : lesPoints(2).Y = 3000 lesPoints(3).X = 2500 : lesPoints(3).Y = 4000 lesPoints(4).X = 4000 : lesPoints(4).Y = 4000 monTexte.insertTextContent(monCurseur, maForme, false) maForme.LineWidth = 80 maForme.PolyPolygon = Array(lesPoints()) Print maForme.VertOrientPosition ' maForme.VertOrientRelation = 0 'relative to page area ' maForme.HoriOrientRelation = 0 'relative to page area Print maForme.HoriOrientPosition maForme2 = monDocument.createInstance("com.sun.star.drawing.PolyLineShape") maForme2.AnchorType = com.sun.star.text.TextContentAnchorType.AT_PAGE maForme2.HoriOrientRelation = com.sun.star.text.RelOrientation.FRAME maForme2.VertOrientRelation = com.sun.star.text.RelOrientation.FRAME lesPoints(0).X = 2000 : lesPoints(0).Y = 2000 lesPoints(1).X = 3000 : lesPoints(1).Y = 2500 lesPoints(2).X = 2500 : lesPoints(2).Y = 3000 lesPoints(3).X = 3000 : lesPoints(3).Y = 6000 lesPoints(4).X = 4000 : lesPoints(4).Y = 4000 monTexte.insertTextContent(monCurseur, maForme2, false) maForme2.LineWidth = 60 maForme2.PolyPolygon = Array(lesPoints()) Print maForme2.VertOrientPosition ' maForme2.VertOrientRelation = 0 'relative to page area ' maForme2.HoriOrientRelation = 0 'relative to page area Print maForme2.HoriOrientPosition End Sub - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[dba-issues] [Issue 49133] Possibility to put macros in *.odb file
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=49133 User pitonyak changed the following: What|Old value |New value CC|'ms2,pagalmes,pmike,wurzel|'ms2,pagalmes,pitonyak,pmi |' |ke,wurzel' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 41131] Reference names in fields should be able to be edited
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=41131 User pitonyak changed the following: What|Old value |New value CC|''|'pitonyak' --- Additional comments from [EMAIL PROTECTED] Thu Jul 19 20:06:42 + 2007 --- 1. In a new Writer document Use Insert > Fields > Other to open the Fields dialog. 2. Select the Variables tab. 3. Select the Number range type. 4. Select Table - the name changes to Table in the lower left corner. 5. In the value field, enter "Table + 1" (without the double quotes). 6. Click Insert to insert the value 1. 7. Click Insert again to inset the value 2. Now, create a your own variable. 8. In the name field, enter Equation. 9. In the value field, enter "Equation + 1" (without the double quotes). 10. click insert to insert the value 1. 11. Click Insert again to inset the value 2. 12. click on the References tab. 13. Under type, click on Table. I see the value 1 and the value 12. Initially, I considered this a bug until I realized that all text to the left of the inserted field is considered its name. The text is included even if that text includes other fields. This is the name that is inserted. I never saw this with respect to tables because I always start a table caption on its own paragraph and precede it with the text "Table ". I thought there was a problem because I label equations using (). The name, therefore, is "(". This would be worse if I attempted to place the equation number to the right of an equation. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 79515] Export to DOC has extreme issues with graphics in frames.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=79515 --- Additional comments from [EMAIL PROTECTED] Thu Jul 12 01:30:55 + 2007 --- Side note: Might be interesting to test with the latest development build since there may be some relation to 43447, 72915, and 75464. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 79515] Export to DOC has extreme issues with graphics in frames.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=79515 Issue #|79515 Summary|Export to DOC has extreme issues with graphics in fram |es. Component|Word processor Version|OOo 2.2.1 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|save-export Assigned to|mru Reported by|pitonyak --- Additional comments from [EMAIL PROTECTED] Thu Jul 12 01:27:09 + 2007 --- The OOo Authors site asks the authors to create captions for figures using the normal OOo format. This format results in a figure inside of a frame with a caption underneath it. If I export this OOo document to a WORD DOC format, the graphics are all over the document and the result is obscured text and a document that is very difficult to read. My work around (for documents not prepared as official OOo documentation) is to NOT use the OOo captioning capabilities because afterwards, the document can only be used as an OOo document (or exported as PDF); it seems that export to HTML also fails for this (but you would need to ask the head of the OOo Authors site, Jean Weber, about that. I store the figure anchored as a character and I manually enter the caption. I tie the two together with a paragraph style designed specifically for the purpose. You can test any document from the OOo authors site. http://www.oooauthors.org/ I think that we only post PDF documents to the final documentation site. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 79174] Simplify macro recording a nd use
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=79174 --- Additional comments from [EMAIL PROTECTED] Tue Jul 3 20:29:59 + 2007 --- My opinion is that the macro recorder should be redesigned to * Use API objects when possible. * Be more tolerant of dialogs (ie, recognized that a dialog was opened and that choices were made). Consider the following list of bugs related to the current macro recorder: 18927 Macrorecorder dont recognize bookmarks. 18162 macro recorder not recordering all mouse clicks in scalc 17497 Macro recorder does not recognize mouse click to shift focus 65268 Macro recorder don't remember text attributes in search/repl 20046 [Meta] Macro Recorder Meta Bug 66183 macro recorder does not record new-file actions 25098 macro recorder doesn´t record 18339 Macro recorder ignores column select 18035 macro recorder in scalc not recording all border selections 51329 Macro recorder does not record non-breaking space 57004 macro recorder does not work in embedded Base forms 17747 Macro recorder does not record graphics layer The following menu options might help: Run the last saved macro. Run the last run macro. Run a macro saved in a file (like a saved text file). Just some thoughts. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[api-issues] [Issue 76449] CurrentSelection (writer) returns wrong values
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=76449 --- Additional comments from [EMAIL PROTECTED] Wed Apr 18 23:41:11 + 2007 --- The reason that you see the "empty" selection is because you did start to make a selection. Consider the following: Nothing selected: Empty selection representing the current cursor position Select a single area: One selection Now, how do you select multiple areas? it causes you to enter a multi-selection mode. The method usually is done as follows: 1. Select initial area any way you desire. 2. Hold down the control key and place the cursor at a specific point 3. Hold down the left mouse button (you just set the cursor) 4. Now drag the mouse and release (you just set the cursor again) and you have three selections. On a whim, Hold down the control key and use the cursor keys to move the cursor. You still have three selections but they all contain text. If you stop at step three and then use the keyboard to move the mouse, then you do not start the third selection. My guess is that this behavior represents how the controller works internally. mroe, I had to read your message a few times to understand what you were saying... I never have selections.getCount() return zero. I do not always have an empty selection. I think that what you really want to say is that you should never return an empty selection. Be careful, because that empty selection may have something of interest attached to it such as an image. I did test and try to select some text, a graphic, and some text, but the act of selecting the graphic "unselected" the text. The returned object was then the graphic and NOT a selections object. That said, I rarely care about the empty selection... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[api-issues] [Issue 76449] CurrentSelection (writer) returns wrong values
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=76449 --- Additional comments from [EMAIL PROTECTED] Tue Apr 17 22:08:52 + 2007 --- It has been this way since version 1.0. What you do not see is that the "empty" selection is really the empty cursor selection. Although you may argue that this is a bug, it is possible that existing code relies on the empty selection as the cursor position. Consider the following, which provides a little text around the "empty" selection. Sub Testselect Dim oDoc As Object Dim oSelection As Object Dim i As Integer Dim s As String Dim oText Dim oSel Dim oCurs oDoc = ThisComponent oSelection = ThisComponent.CurrentSelection s = "" If oSelection.hasElements() Then For i = 0 To oSelection.getCount() - 1 If i > 0 Then s = s & chr( 13 ) oSel = oSelection.getByIndex( i ) s = s & Format( i, "00" ) & (": ") & oSel.getString() oText = oSel.getText() If oText.compareRegionStarts(oSel.getStart(), oSel.getEnd()) = 0 Then oCurs = oText.createTextCursorByRange(oSel) oCurs.goLeft(2, False) oCurs.goRight(4, True) s = s & " : " & oCurs.getString() End If Next i MsgBox( s ) Else REM You will probably NEVER get here MsgBox( "no selection" ) End If End Sub In Summary, yes, the behavior is exactly as you state (you should have read my book or my free macro guide, which discusses this), but, is it a bug? I would say no, but I am not in the position to say so. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[graphics-issues] [Issue 76084] Remove a shape from macro crashes OOo drawing document.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=76084 Issue #|76084 Summary|Remove a shape from macro crashes OOo drawing document |. Component|Drawing Version|OOo 2.2 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|wg Reported by|pitonyak --- Additional comments from [EMAIL PROTECTED] Wed Apr 4 13:43:57 + 2007 --- I was asked how to remove a shape from a drawing document. The following macro, attempts to remove the selected shape, but it crashes instead. Using a drawing, select a single shape and run this macro. Sub Main Dim oShapeName as String Dim oDoc As Object oDoc = ThisComponent oDocCtrl = oDoc.getCurrentController() ' See what is currently selected. oSelection = oDocCtrl.getSelection() If IsEmpty( oSelection ) Then MsgBox( "Zum Löschen muss eine Grafik makiert sein" ) Exit Sub EndIf If oSelection.getCount() > 1 Then MsgBox( "Bitte nur eine Grafik zum löschen auswählen" ) Exit Sub EndIf oOrigShape = oSelection.getByIndex( 0 ) oShapeName = oOrigShape.getName() 'print oShapeName REM I expected that either of these next two statements REM would remove the shape from the document. oOrigShape.Dispose() REM Crash oOrigShape.getParent().Remove(oOrigShape) REM CRASH End Sub - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[graphics-issues] [Issue 76030] Export saves the entire pa ge
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=76030 --- Additional comments from [EMAIL PROTECTED] Wed Apr 4 00:59:27 + 2007 --- I just tested, and you are correct, if I do a select all and then export, it exports only the image without the extra stuff around it. This, at least, is a quick work around. This is, in general, acceptable. Until now, an export of the entire document, was based on the size of the margins. So, I could drag the margins as close to the graphic as I desired, and that was what was exported. It appears as though it no longer cares about the margins during the export. If the change is intentional, then so be it. If the other behavior was desired, then we have a bug. If neither was intentional, then they can choose to do as they deisre. If a user wants to set a specific size, they can always generate an invisible square and then size it as desired, or simply set a "user defined page" and size that appropriately. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[graphics-issues] [Issue 76030] Export saves the entire pa ge
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=76030 User pitonyak changed the following: What|Old value |New value Attachment data| |Created an attachment (id= | |44169) Setting the page si | |ze to User allows for prop | |er export. --- Additional comments from [EMAIL PROTECTED] Mon Apr 2 17:13:02 + 2007 --- Created an attachment (id=44169) Setting the page size to User allows for proper export. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[graphics-issues] [Issue 76030] Export saves the entire pa ge
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=76030 User pitonyak changed the following: What|Old value |New value Attachment data| |Created an attachment (id= | |44168) Exported image that | | is bad --- Additional comments from [EMAIL PROTECTED] Mon Apr 2 17:12:11 + 2007 --- Created an attachment (id=44168) Exported image that is bad - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[graphics-issues] [Issue 76030] Export saves the entire pa ge
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=76030 User pitonyak changed the following: What|Old value |New value Attachment data| |Created an attachment (id= | |44167) This document expor | |ts incorrectly. --- Additional comments from [EMAIL PROTECTED] Mon Apr 2 17:10:13 + 2007 --- Created an attachment (id=44167) This document exports incorrectly. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[graphics-issues] [Issue 76030] Export saves the entire pa ge
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=76030 Issue #|76030 Summary|Export saves the entire page Component|Drawing Version|OOo 2.2 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|save-export Assigned to|wg Reported by|pitonyak --- Additional comments from [EMAIL PROTECTED] Mon Apr 2 17:08:45 + 2007 --- Again problems with image export... This is new to 2.2, it worked fine with 2.0 and 2.1. Create an image. drag the margins to include only the area of interest. Export to PNG or JPG (the two formats that I checked). I am formatted for a page size of 8.5" x 11", so the exported image is of this size rather than the size specified by the margins. It might be argued that this is the same as issue 66044, which is specific to SVG export. My guess is that the problem IS the same, but this issue was present in 2.02, and this behavior with PNG and JPG is new to version 2.2 (unless it happens to be related to the files that I will attach). http://qa.openoffice.org/issues/show_bug.cgi?id=66044 Less related to issue 46394, which simply has the wrong size. The enhancement listed in issue 62446 would likely fix this as well (export and ignore extra white space). - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[marketing-issues] [Issue 74585] collect images of OOo memb ers to create poster
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=74585 User pitonyak changed the following: What|Old value |New value Attachment data| |Created an attachment (id= | |43186) Andrew Pitonyak, Co | |lumbus, Ohio, USA --- Additional comments from [EMAIL PROTECTED] Tue Feb 20 06:16:02 + 2007 --- Created an attachment (id=43186) Andrew Pitonyak, Columbus, Ohio, USA - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 74478] Drag and drop editing of t ext is broken.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=74478 --- Additional comments from [EMAIL PROTECTED] Sun Feb 18 01:51:24 + 2007 --- I assume that this is NOT a standard OOo relesae, but rather, it is a release built and maintained by the "edgy" people. I used to use OOo as distributed by FC6 on AMD64, but it had numerous problems. They ALL went away after I removed the 64 bit FC6 version, made certain I had 32 bit Java installed, and then installed the standard OOo release version 2.1. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[api-issues] [Issue 72380] Adding a number format cha nges the format case.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=72380 Issue #|72380 Summary|Adding a number format changes the format case. Component|api Version|OOo 2.0.4 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|jsc Reported by|pitonyak --- Additional comments from [EMAIL PROTECTED] Thu Dec 7 22:12:11 -0800 2006 --- I noticed thisproblem when I added a number format containing the text "Red" to a Calc document. When I searched for the number format, I could not find it. So, I tried to add the format a second time and this causes my macro to crash because it already exists. OpenOffice continues to run, but there are two problems: 1. The macro fails. 2. It is not possible to find the key that was added. If the key is converted to upper case, the search should NOT be case sensitive. Although I have only tested this macro with a Calc document, the document type should NOT matter. Sub DoTheCrash() Dim s1$ : s1 = "#,##0.00_);[RED](#,##0.00)" Dim s2$ : s2 = "#,##0.00_);[Red](#,##0.000)" Print "Add style 1 = " & FormatStyleCrash(s1, ThisComponent) Print "Check style 1 = " & FormatStyleCrash(s1, ThisComponent) Print "Add style 2 = " & FormatStyleCrash(s2, ThisComponent) Print "Check style 2 = " & FormatStyleCrash(s2, ThisComponent) End Sub Function FormatStyleCrash(sFormat, oDoc) Dim aLocale As New com.sun.star.lang.Locale Dim oFormats As Object Dim formatNum As Integer oFormats = oDoc.getNumberFormats() formatNum = oFormats.queryKey(sFormat, aLocale, True) 'MsgBox "Current Format number is" & formatNum 'If the number format does not exist then add it If (formatNum = -1) Then 'Print "Ready to add format " & sFormat formatNum = oFormats.addNew(sFormat, aLocale) If (formatNum = -1) Then formatNum = 0 'MsgBox "new Format number is " & formatNum End If FormatStyleCrash = formatNum End Function - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 72077] Document causes OOo to loc k when viewing page
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=72077 User pitonyak changed the following: What|Old value |New value Attachment data| |Created an attachment (id= | |40977) This is a good copy | | of the document after I r | |emoved the offending XML. --- Additional comments from [EMAIL PROTECTED] Tue Nov 28 11:05:25 -0800 2006 --- Created an attachment (id=40977) This is a good copy of the document after I removed the offending XML. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 72077] Document causes OOo to loc k when viewing page
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=72077 User pitonyak changed the following: What|Old value |New value Attachment data| |Created an attachment (id= | |40976) This is the BAD doc | |ument. Do not open unless | |you have saved all of your | | documents. Enabling Macro | |s makes no difference. --- Additional comments from [EMAIL PROTECTED] Tue Nov 28 11:03:39 -0800 2006 --- Created an attachment (id=40976) This is the BAD document. Do not open unless you have saved all of your documents. Enabling Macros makes no difference. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 72077] Document causes OOo to loc k when viewing page
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=72077 Issue #|72077 Summary|Document causes OOo to lock when viewing page Component|Word processor Version|OOo 2.1 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|mru Reported by|pitonyak --- Additional comments from [EMAIL PROTECTED] Tue Nov 28 11:01:55 -0800 2006 --- I have a document that causes OOo to lock in version 2.04 and 2.1 on both Linux and Windows. (I will create an attachment) On Windows and Linux, I cause OOo to lock using Tools | Update | Update All. On Windows and Linux, I cause OOo to lock by exporting to a PDF. After loading the file into Windows, I realized that even attempting to view page 23, which has the sections "Create the DEALER table" and "Create the ITEM table", causes OOo to hang. If you expand the document and look at the XML, you can fix the problem by removing the following XML. Figure 1: Copy DEALER table to the ITEM table. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 68515] Calc - Subtotals can't be automated with the macro
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=68515 --- Additional comments from [EMAIL PROTECTED] Wed Aug 23 20:56:57 -0700 2006 --- So what you really want, is that the dispatch will accept arguments containing all of the information required to create the subtotal without opening a dialog or requiring any sort of user interaction. Realize that at the moment, the macro recorder noticed that you opened the dialog, but it does not record what you do in the dialog. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[dba-issues] [Issue 55949] TimeStamp fields are not c onsistent in fractional seconds.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=55949 --- Additional comments from [EMAIL PROTECTED] Tue Aug 22 13:18:13 -0700 2006 --- I downloaded a development build of 2.0.4 under windows. resultSet.getString() correctly returns hundredths of a second. ERROR: resultSet.getTimeStamp() return an incorrect hundredths of a second. ERROR: rowSet.getString() does NOT return hundredths of a second. ERROR: rowSet.getTimeStamp() return an incorrect hundredths of a second. So, the only way to get the correct value is to use a result set and use getString(). - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[dba-issues] [Issue 55949] TimeStamp fields are not c onsistent in fractional seconds.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=55949 --- Additional comments from [EMAIL PROTECTED] Mon Aug 21 22:27:19 -0700 2006 --- I tested 2.0.3 on Linux FC4. For a time stamp: resultSet.getString() does return hundredths of a second. ERROR: resultSet.getTimeStamp() does NOT return hundredths of a second. ERROR: rowSet.getString() does return hundredths of a second. ERROR: rowSet.getTimeStamp() does NOT return hundredths of a second. Would you like me to install a development build on a windows computer and check it? This is not fixed in 2.0.3. getTimeStamp(1) does not return fractional seconds and getString(1) does. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[lingucomponent-issues] [Issue 68311] Words added to Standard li brary show as mispelled.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=68311 --- Additional comments from [EMAIL PROTECTED] Wed Aug 9 21:43:18 -0700 2006 --- May be related to http://qa.openoffice.org/issues/show_bug.cgi?id=58874 in some way. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[lingucomponent-issues] [Issue 68311] Words added to Standard li brary show as mispelled.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=68311 Issue #|68311 Summary|Words added to Standard library show as mispelled. Component|lingucomponent Version|OOo 2.0.3 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|spell checking Assigned to|[EMAIL PROTECTED] Reported by|pitonyak --- Additional comments from [EMAIL PROTECTED] Wed Aug 9 21:03:12 -0700 2006 --- I am adding this based on the following post: http://www.oooforum.org/forum/viewtopic.phtml?t=41105 Language is Spanish. Auto spell check is on. Add words to the STANDARD dictionary. The manual spell check now skips them correctly but the auto spell check still underlines them with the red line. The red line doesn't actually activate the special right-click menu for corrections. If I right-click on top of the red-underlined word I'll get the standard right-click menu (formatting options). That suggests the auto spell checker now knows the word is correct, but it still underlines it in red. Comment by Andrew Pitonyak: I verified that this works correctly in US English. I will have the original reporter add more comments. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 63614] New - IIF is fragile in St arBasic
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=63614 Issue #:|63614 Summary:|IIF is fragile in StarBasic Component:|framework Version:|OOo 2.0.2 Platform:|All URL:|http://www.oooforum.org/forum/viewtopic.phtml?t=33910 OS/Version:|All Status:|NEW Status whiteboard:| Keywords:| Resolution:| Issue type:|DEFECT Priority:|P3 Subcomponent:|scripting Assigned to:|npower Reported by:|pitonyak --- Additional comments from [EMAIL PROTECTED] Sat Mar 25 05:14:52 -0800 2006 --- I have had macros that use IIF that will suddenly fail for no particular reason. Recently, I ran accross a great example of this. The macro is shown here: http://www.oooforum.org/forum/viewtopic.phtml?t=33910 Create a new module and add the macro (which I will append at the bottom of this post). The macro works just fine. Now, add a simple comment near the top. Change the top comment from one line to two REM making the use of calc function library within OOBasic easier REM Does this mess things up? Now, run the macro again and it will fail just before the IIF statement. Now, change the IIF statement from tempVec2 = DimArray( IIf( nCols = 0, 0, nCols - 1 ) ) to If nCols = 0 Then tempVec2 = DimArray( 0 ) Else tempVec2 = DimArray( nCols - 1 ) End If Now, the macro will work. REM * BASIC * Option Explicit REM making the use of calc function library within OOBasic easier Sub testCalcFunctions Dim a(1), b(1) a(0) = 1 : a(1) = 2 b(0) = 3 : b(1) = 4 MsgBox "Dot product is " & fnCalcFunction( "SUMPRODUCT", Array( a(), b() ) ) Dim x As Integer x = 5 MsgBox "Factorial of " & x & " is " & fnCalcFunction( "FACT", Array( x ) ) Dim tempArray(1,1) As Variant tempArray(0,0) = 0 : tempArray(0,1) = 1 tempArray(1,0) = 2 : tempArray(1,1) = 3 Dim funcResult() As Variant funcResult() = fnCalcFunction( "TRANSPOSE", Array( tempArray() ) ) MsgBox "Transpose of" & chr(13) & _ tempArray(0,0) & ", " & tempArray(0,1) & chr(13) & _ tempArray(1,0) & ", " & tempArray(1,1) & chr(13) & _ "is" & chr(13) & _ funcResult(0,0) & ", " & funcResult(0,1) & chr(13) & _ funcResult(1,0) & ", " & funcResult(1,1) MsgBox "Determinate is " & fnCalcFunction( "MDETERM", Array( tempArray() ) ) End Sub REM The following are trivially simple examples of user defined functions REM which can be used as formulas in a spreadsheet cell. Function fnAbs( a ) fnAbs() = fnCalcFunction( "ABS", Array( a ) ) End Function Function fnTranspose( a() ) fnTranspose() = fnCalcFunction( "TRANSPOSE", Array( a() ) ) End Function Function fnDot( a(), b() ) fnDot() = fnCalcFunction( "SUMPRODUCT", Array( a(), b() ) ) End Function REM ## REM ## REM ## REM REM The below functions provide the basic utilities for conveniently REM using calc functions (including array functions) within OOBasic. REM REM ## REM ## REM ## Function fnCalcFunction( sFunc As String, args() ) As Variant REM this function is just a utility function for making the REM FunctionAccess service easier to use. REM first, if any of the argumenst are arrays, convert them to REM vectors of vectors Dim i As Integer For i = LBound( args() ) To UBound( args() ) If IsArray( args( i ) ) Then args( i ) = fnBasicArrayToFuncArray( args( i ) ) End If Next Dim myFuncAccess As Variant, myFuncResult As Variant myFuncAccess = createUNOService( "com.sun.star.sheet.FunctionAccess" ) myFuncResult = myFuncAccess.callFunction( sFunc, args() ) REM now restore any of the array arguments back to normal arrays For i = LBound( args() ) To UBound( args() ) If IsArray( args( i ) ) Then _ args( i ) = fnFuncArrayToBasicArray( args(i) ) Next REM and if the result is an array, convert it from a vector of REM vectors to a normal array If IsArray( myFuncResult ) Then _ myFuncResult = fnFuncArrayToBasicArray( myFuncResult() ) fnCalcFunction() = myFuncResult End Function REM
[dba-issues] [Issue 55949] TimeStamp fields are not consistent in fractional seconds.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=55949 User pitonyak changed the following: What|Old value |New value Status|RESOLVED |REOPENED Resolution|WORKSFORME| --- Additional comments from [EMAIL PROTECTED] Tue Feb 14 07:36:03 -0800 2006 --- I see some issues as working, but not all of them the results for m156 are the same as for m155. Here is a summary of the results: Time fields never contain fractional seconds. Is this an error? TimeStamp fields never contain a fractional value from a RowSet. From a ResultSet, however, the fractional value is returned by getString(), but NOT by getTimeStamp(). Clearly this is an error. One error was fixed, you can now update a time stamp that contains fractional values. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[dba-issues] [Issue 55949] TimeStamp fields are not consistent in fractional seconds.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=55949 User pitonyak changed the following: What|Old value |New value Attachment data| |Created an attachment | |(id=34149) I updated the | |macro to be more | |descriptive in the | |results. --- Additional comments from [EMAIL PROTECTED] Tue Feb 14 07:37:35 -0800 2006 --- Created an attachment (id=34149) I updated the macro to be more descriptive in the results. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[dba-issues] [Issue 55949] TimeStamp fields are not consistent in fractional seconds.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=55949 User pitonyak changed the following: What|Old value |New value Attachment data| |Created an attachment | |(id=34148) Test result | |document --- Additional comments from [EMAIL PROTECTED] Tue Feb 14 07:36:57 -0800 2006 --- Created an attachment (id=34148) Test result document - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[dba-issues] [Issue 59048] Can not delete Base docum ent
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=59048 --- Additional comments from [EMAIL PROTECTED] Tue Dec 13 14:16:06 -0800 2005 --- Yes, I think that we can. If I notice the problem on a later version or a different Base document, I will reproduce and reopen. I noticed the problem and ignored it because Frank S indicated that it was fixed and should be fixed in 2.01 final release. I was contacted by four people who said that they had a problem so I verified that it existed in 2.01 RC 2 and I reproduced. so I opened the issue. Ironically, none of the people that said that it was such a critical problem took the time to come and post a note here as I requested. Either way, my last test demonstrated that it seems to work now so I am happy. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[dba-issues] [Issue 59048] Can not delete Base docum ent
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=59048 --- Additional comments from [EMAIL PROTECTED] Tue Dec 13 06:48:22 -0800 2005 --- You are correct, with build 145 this now works for me as well. I think that it did NOT work with the previous build. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[api-issues] [Issue 59222] New - Non-zero LineDistanc e not saved in a Write Table
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=59222 Issue #:|59222 Summary:|Non-zero LineDistance not saved in a Write Table Component:|api Version:|OOo 2.0 Platform:|All URL:| OS/Version:|Linux Status:|NEW Status whiteboard:| Keywords:| Resolution:| Issue type:|DEFECT Priority:|P3 Subcomponent:|code Assigned to:|sw Reported by:|pitonyak --- Additional comments from [EMAIL PROTECTED] Sun Dec 11 20:25:13 -0800 2005 --- Create a Write document. Create a Text Table. Place the cursor in the text table. Run the following macro Sub tbl_border_onerow 'blue Dim oSels,oTables,oCells Dim oVC oSels = ThisComponent.getCurrentController().getSelection() oVC = ThisComponent.getCurrentController().getViewCursor() 'oVC.cell.BottomBorder = MakeCellBorderLine( RGB(0,0,255), 150, 150, 100) Dim oBorderLine oBorderLine = oVC.cell.BottomBorder With oBorderLine .Color = RGB(0,0,255) .InnerLineWidth = 150 .OuterLineWidth = 150 .LineDistance = 100 End With oVC.cell.BottomBorder = oBorderLine End sub You now have a double blue line as the bottom line in the cell with the cursor. Now, save the document, close the document, and open the document. The double line is gone (there is no line). If you change the LineDistance from 100 to 0, then I observe no problems. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[dba-issues] [Issue 59052] unable to establish multi ple relationships between two tables.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=59052 User pitonyak changed the following: What|Old value |New value Attachment data| |Created an attachment | |(id=32192) I can create | |the relationship, just not | |with the GUI. --- Additional comments from [EMAIL PROTECTED] Wed Dec 7 12:59:43 -0800 2005 --- Created an attachment (id=32192) I can create the relationship, just not with the GUI. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[dba-issues] [Issue 59052] unable to establish multi ple relationships between two tables.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=59052 User pitonyak changed the following: What|Old value |New value Attachment data| |Created an attachment | |(id=32191) You can not | |establish a second | |relathipship with this | |file. --- Additional comments from [EMAIL PROTECTED] Wed Dec 7 12:59:12 -0800 2005 --- Created an attachment (id=32191) You can not establish a second relathipship with this file. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[dba-issues] [Issue 59052] New - unable to establish multiple relationships between two tables.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=59052 Issue #:|59052 Summary:|unable to establish multiple relationships between |two tables. Component:|Database access Version:|OOo 2.0.1 Platform:|All URL:| OS/Version:|Windows, all Status:|NEW Status whiteboard:| Keywords:| Resolution:| Issue type:|DEFECT Priority:|P3 Subcomponent:|none Assigned to:|dbaneedsconfirm Reported by:|pitonyak --- Additional comments from [EMAIL PROTECTED] Wed Dec 7 12:58:09 -0800 2005 --- Perhaps this should be an RFE rather than a defect, but... I found this while trying to answer a question on the oooforum. Consider a simple table with transactions TRANS: ID is an integer Now, consider a table that relates two transactions together CHARGE: ID is an integer TRANS1 TRANS2 There should be a 1-to-n relationship from TRANS1 to TRANS.ID and from TRANS2 to TRANS.ID. The GUI will not allow you to create this relationship, but it can be done if you directly modify database\script. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]