[Asterisk-Users] Asterisk start errors with TDM2413E
I get the following errors when starting Asterisk. == Parsing '/etc/asterisk/zapata.conf': Found Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open: Unable to specify channel 1: No such device Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable to open channel 1: No such device here = 0, tmp->channel = 1, channel = 1 Feb 19 21:14:35 ERROR[10440]: chan_zap.c:10264 setup_zap: Unable to register channel '1' Feb 19 21:14:35 WARNING[10440]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 Feb 19 21:14:35 WARNING[10440]: loader.c:554 load_modules: Loading module chan_zap.so failed! [EMAIL PROTECTED] ~]# Ouch ... error while writing audio data: : Broken pipe Software versions asterisk-1.2.3 asterisk-addons-1.2.1 asterisk-perl-0.08 asterisk-sounds-1.2.1 libpri-1.2.2 zaptel-1.2.4 Output from modprobes [EMAIL PROTECTED] asterisk]# modprobe -v zaptel insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/zaptel.ko [EMAIL PROTECTED] asterisk]# modprobe -v wctdm24xxp install /sbin/modprobe --ignore-install wctdm24xxp && /sbin/ztcfg insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/wctdm24xxp.ko This takes at least 10 seconds to come back to a prompt ztcfg output [EMAIL PROTECTED] asterisk]# ztcfg -vv Zaptel Configuration == Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Slaves: 04) Channel 05: FXS Kewlstart (Default) (Slaves: 05) Channel 06: FXS Kewlstart (Default) (Slaves: 06) Channel 07: FXS Kewlstart (Default) (Slaves: 07) Channel 08: FXS Kewlstart (Default) (Slaves: 08) Channel 09: FXS Kewlstart (Default) (Slaves: 09) Channel 10: FXS Kewlstart (Default) (Slaves: 10) Channel 11: FXS Kewlstart (Default) (Slaves: 11) Channel 12: FXS Kewlstart (Default) (Slaves: 12) Channel 13: FXS Kewlstart (Default) (Slaves: 13) Channel 14: FXS Kewlstart (Default) (Slaves: 14) Channel 15: FXS Kewlstart (Default) (Slaves: 15) Channel 16: FXS Kewlstart (Default) (Slaves: 16) 16 channels configured. zaptel.conf fxoks=1-4 fxsks=5-16 defaultzone=us loadzone=us zapata.conf [channels] signalling=fxo_ks echocancel=yes echocancelwhenbridged=yes usecallerid=yes context=outstation channel=> 1-4 signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes usecallerid=yes group=2 context=incomingpstn channel=> 5-16 Best regards, Duane Pudenz Network Infrastructure Manager Shasta Industries___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE : [Asterisk-Users] Asterisk start errors with TDM2413E
I do not think so by reading the documentation however I have changed the settings and still get the same error when starting Asterisk Best regards, Duane Pudenz Network Infrastructure Manager Shasta Industries - Message from <[EMAIL PROTECTED]> on Mon, 20 Feb 2006 07:08:05 +0100 - To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" Subject: RE : [Asterisk-Users] Asterisk start errors with TDM2413E Hi, I believe that you have inverted fxo_ks and fxs_ks into your zapata.cong file "signaling=" declaration... Invert and redo the tests. Good Luck ! Francois BERGERET, France. -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de [EMAIL PROTECTED] Envoyé : lundi 20 février 2006 04:34 À : asterisk-users@lists.digium.com Objet : [Asterisk-Users] Asterisk start errors with TDM2413E I get the following errors when starting Asterisk. == Parsing '/etc/asterisk/zapata.conf': Found Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open: Unable to specify channel 1: No such device Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable to open channel 1: No such device here = 0, tmp->channel = 1, channel = 1 Feb 19 21:14:35 ERROR[10440]: chan_zap.c:10264 setup_zap: Unable to register channel '1' Feb 19 21:14:35 WARNING[10440]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 Feb 19 21:14:35 WARNING[10440]: loader.c:554 load_modules: Loading module chan_zap.so failed! [EMAIL PROTECTED] ~]# Ouch ... error while writing audio data: : Broken pipe Software versions asterisk-1.2.3 asterisk-addons-1.2.1 asterisk-perl-0.08 asterisk-sounds-1.2.1 libpri-1.2.2 zaptel-1.2.4 Output from modprobes [EMAIL PROTECTED] asterisk]# modprobe -v zaptel insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/zaptel.ko [EMAIL PROTECTED] asterisk]# modprobe -v wctdm24xxp install /sbin/modprobe --ignore-install wctdm24xxp && /sbin/ztcfg insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/wctdm24xxp.ko This takes at least 10 seconds to come back to a prompt ztcfg output [EMAIL PROTECTED] asterisk]# ztcfg -vv Zaptel Configuration == Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Slaves: 04) Channel 05: FXS Kewlstart (Default) (Slaves: 05) Channel 06: FXS Kewlstart (Default) (Slaves: 06) Channel 07: FXS Kewlstart (Default) (Slaves: 07) Channel 08: FXS Kewlstart (Default) (Slaves: 08) Channel 09: FXS Kewlstart (Default) (Slaves: 09) Channel 10: FXS Kewlstart (Default) (Slaves: 10) Channel 11: FXS Kewlstart (Default) (Slaves: 11) Channel 12: FXS Kewlstart (Default) (Slaves: 12) Channel 13: FXS Kewlstart (Default) (Slaves: 13) Channel 14: FXS Kewlstart (Default) (Slaves: 14) Channel 15: FXS Kewlstart (Default) (Slaves: 15) Channel 16: FXS Kewlstart (Default) (Slaves: 16) 16 channels configured. zaptel.conf fxoks=1-4 fxsks=5-16 defaultzone=us loadzone=us zapata.conf [channels] signalling=fxo_ks echocancel=yes echocancelwhenbridged=yes usecallerid=yes context=outstation channel=> 1-4 signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes usecallerid=yes group=2 context=incomingpstn channel=> 5-16 Best regards, Duane Pudenz Network Infrastructure Manager Shasta Industries ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE : [Asterisk-Users] Asterisk start errors with TDM2413E
Issue resolved, Thanks Digium! The module slot closest to the bracket that contains the connector is the last slot. I assumed that the first slot would be at the bracket. Silly user error, never assume. Best regards, Duane Pudenz Network Infrastructure Manager Shasta Industries o. 602.532.3706 c. 602.692.0304 __ I do not think so by reading the documentation however I have changed the settings and still get the same error when starting Asterisk Best regards, Duane Pudenz Network Infrastructure Manager Shasta Industries - Message from <[EMAIL PROTECTED]> on Mon, 20 Feb 2006 07:08:05 +0100 - To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" Subject: RE : [Asterisk-Users] Asterisk start errors with TDM2413E Hi, I believe that you have inverted fxo_ks and fxs_ks into your zapata.cong file "signaling=" declaration... Invert and redo the tests. Good Luck ! Francois BERGERET, France. -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de [EMAIL PROTECTED] Envoyé : lundi 20 février 2006 04:34 À : asterisk-users@lists.digium.com Objet : [Asterisk-Users] Asterisk start errors with TDM2413E I get the following errors when starting Asterisk. == Parsing '/etc/asterisk/zapata.conf': Found Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open: Unable to specify channel 1: No such device Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable to open channel 1: No such device here = 0, tmp->channel = 1, channel = 1 Feb 19 21:14:35 ERROR[10440]: chan_zap.c:10264 setup_zap: Unable to register channel '1' Feb 19 21:14:35 WARNING[10440]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 Feb 19 21:14:35 WARNING[10440]: loader.c:554 load_modules: Loading module chan_zap.so failed! [EMAIL PROTECTED] ~]# Ouch ... error while writing audio data: : Broken pipe Software versions asterisk-1.2.3 asterisk-addons-1.2.1 asterisk-perl-0.08 asterisk-sounds-1.2.1 libpri-1.2.2 zaptel-1.2.4 Output from modprobes [EMAIL PROTECTED] asterisk]# modprobe -v zaptel insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/zaptel.ko [EMAIL PROTECTED] asterisk]# modprobe -v wctdm24xxp install /sbin/modprobe --ignore-install wctdm24xxp && /sbin/ztcfg insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/wctdm24xxp.ko This takes at least 10 seconds to come back to a prompt ztcfg output [EMAIL PROTECTED] asterisk]# ztcfg -vv Zaptel Configuration == Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Slaves: 04) Channel 05: FXS Kewlstart (Default) (Slaves: 05) Channel 06: FXS Kewlstart (Default) (Slaves: 06) Channel 07: FXS Kewlstart (Default) (Slaves: 07) Channel 08: FXS Kewlstart (Default) (Slaves: 08) Channel 09: FXS Kewlstart (Default) (Slaves: 09) Channel 10: FXS Kewlstart (Default) (Slaves: 10) Channel 11: FXS Kewlstart (Default) (Slaves: 11) Channel 12: FXS Kewlstart (Default) (Slaves: 12) Channel 13: FXS Kewlstart (Default) (Slaves: 13) Channel 14: FXS Kewlstart (Default) (Slaves: 14) Channel 15: FXS Kewlstart (Default) (Slaves: 15) Channel 16: FXS Kewlstart (Default) (Slaves: 16) 16 channels configured. zaptel.conf fxoks=1-4 fxsks=5-16 defaultzone=us loadzone=us zapata.conf [channels] signalling=fxo_ks echocancel=yes echocancelwhenbridged=yes usecallerid=yes context=outstation channel=> 1-4 signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes usecallerid=yes group=2 context=incomingpstn channel=> 5-16 Best regards, Duane Pudenz Network Infrastructure Manager Shasta Industries ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Calls not going through
When a call is placed out the Zap interface there is a long pause followed by an error message from the telco that the call can not be placed as dialed. We have a tdm2413e with 11 1FB (POTS) lines. The number being dialed is a working local number, all dialed numbers get the same error. What should we be looking for ? Best regards, Duane Pudenz Network Infrastructure Manager Shasta Industries ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Want to record call and put into users voicemail
We want to allow users to record calls, have the recording go to the users voicemail box, and then email the user with the recording. We are running Asterisk 1.2 Best regards, Duane Pudenz Network Infrastructure Manager Shasta Industries o. 602.532.3706 c. 602.692.0304___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users