Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
The problem here, if it's a problem, is that it IS a POTS dialtone and not asterisk's. So you can dial only what the telco lets you dial. Al lists wrote: Here is how i overcome this problem, ignorpat = 9 exten = 9*,1,Dial(ZAP/1/w) press 9* from your handset and after 1 second you have POTS line dial tone on your phone, On 10/3/07, *Mojo with Horan Company, LLC* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: It would be ugly, but you could prefix a zap channel or group number before the phone number to dial. Using groups for an example: exten = _*X*X.,1,Dial(ZAP/g${EXTEN:1:1}/${EXTEN:3}) exten = _*XX*X.,1,Dial(ZAP/g${EXTEN:1:2}/${EXTEN:4}) so dialing *4*18005551212 dials out over zap group 4... bilal ghayyad wrote: I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone, not a dialtone provided by Asterisk. Al lists wrote: Correction, on FXO port not FXS, second, read his email first: Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line. Just assign a key on your phone to dial that extension, and you will have dial tone on selected line, then as a traditional PBX you can send any digits to your provider. On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: ignorepat continues dialtone after a leading digit has been dialed on FXS ports. How does ignorepat help this guy? Al lists wrote: ignorpat is your friend On 9/30/07, Tzafrir Cohen [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal ghayyad wrote: Dear List; How can I place a call via Zap/g1 (group) but need to determine the line (FXO port) that will go via it? Simply don't use groups. Use channels directly. To dial via the specific Zaptel channel NN, use Zap/NN Am I missing anything? Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games. http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone, not a dialtone provided by Asterisk. Al lists wrote: Correction, on FXO port not FXS, second, read his email first: Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line. Just assign a key on your phone to dial that extension, and you will have dial tone on selected line, then as a traditional PBX you can send any digits to your provider. On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: ignorepat continues dialtone after a leading digit has been dialed on FXS ports. How does ignorepat help this guy? Al lists wrote: ignorpat is your friend On 9/30/07, Tzafrir Cohen [EMAIL PROTECTED] wrote: On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal ghayyad wrote: Dear List; How can I place a call via Zap/g1 (group) but need to determine the line (FXO port) that will go via it? Simply don't use groups. Use channels directly. To dial via the specific Zaptel channel NN, use Zap/NN Am I missing anything? Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games. http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
I can't help you with that. I only wanted to point out that ignoreopat is not what you need. On Polycom SIP phones you continue dialtone by placing a , in the phone's dialplan. SIP phones have their own internal dialplan that is not part of Asterisk's dialplan. You would have to check the docs for your phone. Not all SIP phones can continue dialtone. bilal ghayyad wrote: I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone, not a dialtone provided by Asterisk. Al lists wrote: Correction, on FXO port not FXS, second, read his email first: Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line. Just assign a key on your phone to dial that extension, and you will have dial tone on selected line, then as a traditional PBX you can send any digits to your provider. On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: ignorepat continues dialtone after a leading digit has been dialed on FXS ports. How does ignorepat help this guy? Al lists wrote: ignorpat is your friend On 9/30/07, Tzafrir Cohen [EMAIL PROTECTED] wrote: On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal ghayyad wrote: Dear List; How can I place a call via Zap/g1 (group) but need to determine the line (FXO port) that will go via it? Simply don't use groups. Use channels directly. To dial via the specific Zaptel channel NN, use Zap/NN Am I missing anything? ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
For another tone frequency for the outside dialtone, try putting this value [EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL PROTECTED];*(.4/0/1),10(*/0/2+3) in the Outside Dialtone field. It will give you a slight pause followed by a different dialtone frequency. On a Linksys/Siprua 941, that would be at the top of the Regional page. However, you won't hear any secondary dialtone unless you put a comma after EVERY initial '9' in the dialplan string for each line in use. On a 941, that would be at the bottom of the Ext 1 and Ext 2 pages of the web interface. I suggest the dialplan string of: (*xx|[1-7]xx|9,[3469]11|98|99|9,[2-9]xx|9,11|9,[2-9]xx|9,1[2-9]xx[2-9]xx|9,011xxx.) - Walt Joyce Eric ManxPower Wieling wrote: I can't help you with that. I only wanted to point out that ignoreopat is not what you need. On Polycom SIP phones you continue dialtone by placing a , in the phone's dialplan. SIP phones have their own internal dialplan that is not part of Asterisk's dialplan. You would have to check the docs for your phone. Not all SIP phones can continue dialtone. bilal ghayyad wrote: I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone, not a dialtone provided by Asterisk. Al lists wrote: Correction, on FXO port not FXS, second, read his email first: Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line. Just assign a key on your phone to dial that extension, and you will have dial tone on selected line, then as a traditional PBX you can send any digits to your provider. On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: ignorepat continues dialtone after a leading digit has been dialed on FXS ports. How does ignorepat help this guy? Al lists wrote: ignorpat is your friend On 9/30/07, Tzafrir Cohen [EMAIL PROTECTED] wrote: On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal ghayyad wrote: Dear List; How can I place a call via Zap/g1 (group) but need to determine the line (FXO port) that will go via it? Simply don't use groups. Use channels directly. To dial via the specific Zaptel channel NN, use Zap/NN Am I missing anything? ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
It would be ugly, but you could prefix a zap channel or group number before the phone number to dial. Using groups for an example: exten = _*X*X.,1,Dial(ZAP/g${EXTEN:1:1}/${EXTEN:3}) exten = _*XX*X.,1,Dial(ZAP/g${EXTEN:1:2}/${EXTEN:4}) so dialing *4*18005551212 dials out over zap group 4... bilal ghayyad wrote: I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone, not a dialtone provided by Asterisk. Al lists wrote: Correction, on FXO port not FXS, second, read his email first: Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line. Just assign a key on your phone to dial that extension, and you will have dial tone on selected line, then as a traditional PBX you can send any digits to your provider. On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: ignorepat continues dialtone after a leading digit has been dialed on FXS ports. How does ignorepat help this guy? Al lists wrote: ignorpat is your friend On 9/30/07, Tzafrir Cohen [EMAIL PROTECTED] wrote: On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal ghayyad wrote: Dear List; How can I place a call via Zap/g1 (group) but need to determine the line (FXO port) that will go via it? Simply don't use groups. Use channels directly. To dial via the specific Zaptel channel NN, use Zap/NN Am I missing anything? Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games. http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
Here is how i overcome this problem, ignorpat = 9 exten = 9*,1,Dial(ZAP/1/w) press 9* from your handset and after 1 second you have POTS line dial tone on your phone, On 10/3/07, Mojo with Horan Company, LLC [EMAIL PROTECTED] wrote: It would be ugly, but you could prefix a zap channel or group number before the phone number to dial. Using groups for an example: exten = _*X*X.,1,Dial(ZAP/g${EXTEN:1:1}/${EXTEN:3}) exten = _*XX*X.,1,Dial(ZAP/g${EXTEN:1:2}/${EXTEN:4}) so dialing *4*18005551212 dials out over zap group 4... bilal ghayyad wrote: I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone, not a dialtone provided by Asterisk. Al lists wrote: Correction, on FXO port not FXS, second, read his email first: Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line. Just assign a key on your phone to dial that extension, and you will have dial tone on selected line, then as a traditional PBX you can send any digits to your provider. On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: ignorepat continues dialtone after a leading digit has been dialed on FXS ports. How does ignorepat help this guy? Al lists wrote: ignorpat is your friend On 9/30/07, Tzafrir Cohen [EMAIL PROTECTED] wrote: On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal ghayyad wrote: Dear List; How can I place a call via Zap/g1 (group) but need to determine the line (FXO port) that will go via it? Simply don't use groups. Use channels directly. To dial via the specific Zaptel channel NN, use Zap/NN Am I missing anything? Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games. http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users